On 01/20/2021 7:14 PM Richard Zalewski <dick.w7zr@...> wrote:

 

 

Auto logging does not seem to be working for FT8.  Checked my band plan table all ok as nothing changed from before conversion.  If I manually select log qso from wsjt-x I see a flash on the l32 page but does not go into log.  Something changed from the conversion.

Richard 

W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV

 

Be joyful in hope, patient in affliction, faithful in prayer

Richard, I know nothing about 'auto logging from WSJT-X', or for that matter WSJT-X. There is an option in Logger32 to attempt to bypass/override the requirement to click the mouse on the 'log this QSO' popup (the ARRL requirement for 'contemporaneous user input'. Whatever the hell that is) . If it works - Yay! If it doesn't , then :(

 

SeventyThree(s).

On 01/20/2021 7:14 PM Richard Zalewski <dick.w7zr@...> wrote:

 

 

Auto logging does not seem to be working for FT8.  Checked my band plan table all ok as nothing changed from before conversion.  If I manually select log qso from wsjt-x I see a flash on the l32 page but does not go into log.  Something changed from the conversion.

Richard 

W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV

 

Be joyful in hope, patient in affliction, faithful in prayer

More info: Went to the log in WSJT and exported a qso as an adif file. Then imported into L32.  It does not display on the log page.  When I try to import the same qso again it tells me it is in the log but still not displaying on the log page.
Richard
*W7ZR* ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV
*/Be joyful in hope, patient in affliction, faithful in prayer/*
On Wed, Jan 20, 2021 at 4:15 PM Richard Zalewski via groups.io <http://groups.io> <dick.w7zr=gmail.com@groups.io <mailto:gmail.com@groups.io>> wrote:
Auto logging does not seem to be working for FT8.  Checked my band
plan table all ok as nothing changed from before conversion.  If I
manually select log qso from wsjt-x I see a flash on the l32 page
but does not go into log.  Something changed from the conversion.
Richard
*W7ZR* ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF,
W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV
*/Be joyful in hope, patient in affliction, faithful in prayer/*

On 01/20/2021 10:16 PM Bill K4BX via groups.io <k4bx@...> wrote:

 

 

When auto logging FT8 QSO's from JTDX they don't show up at the end of the log.... but when I search for the calls they are found in the log. They just don't seem to be sorted by QSO time. Anyway if you right click on the log and do a search for the contacts you will find them. The Cherry-picking event viewer says the contacts were logged. Don't know why they don't appear at the bottom of the log page.
73 Bill K4BX

On 1/20/2021 7:01 PM, Bob wrote:

Richard, I know nothing about 'auto logging from WSJT-X', or for that matter WSJT-X. There is an option in Logger32 to attempt to bypass/override the requirement to click the mouse on the 'log this QSO' popup (the ARRL requirement for 'contemporaneous user input'. Whatever the hell that is) . If it works - Yay! If it doesn't , then :(

 

SeventyThree(s).

On 01/20/2021 7:14 PM Richard Zalewski <dick.w7zr@...> wrote:

 

 

Auto logging does not seem to be working for FT8.  Checked my band plan table all ok as nothing changed from before conversion.  If I manually select log qso from wsjt-x I see a flash on the l32 page but does not go into log.  Something changed from the conversion.

Richard 

W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV

 

Be joyful in hope, patient in affliction, faithful in prayer

On 01/20/2021 10:21 PM Richard Zalewski <dick.w7zr@...> wrote:

 

 

What appears to be happening is some QSOs are being held in some file that is not being processed.  I log a qso manually and I find that a completely different QSO is put at the bottom of the log.

Richard 

W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV

 

Be joyful in hope, patient in affliction, faithful in prayer

On Wed, Jan 20, 2021 at 7:16 PM Bill K4BX via groups.io <k4bx= yahoo.com@groups.io> wrote:

When auto logging FT8 QSO's from JTDX they don't show up at the end of the log.... but when I search for the calls they are found in the log. They just don't seem to be sorted by QSO time. Anyway if you right click on the log and do a search for the contacts you will find them. The Cherry-picking event viewer says the contacts were logged. Don't know why they don't appear at the bottom of the log page.
73 Bill K4BX

On 1/20/2021 7:01 PM, Bob wrote:

Richard, I know nothing about 'auto logging from WSJT-X', or for that matter WSJT-X. There is an option in Logger32 to attempt to bypass/override the requirement to click the mouse on the 'log this QSO' popup (the ARRL requirement for 'contemporaneous user input'. Whatever the hell that is) . If it works - Yay! If it doesn't , then :(

 

SeventyThree(s).

On 01/20/2021 7:14 PM Richard Zalewski <dick.w7zr@...> wrote:

 

 

Auto logging does not seem to be working for FT8.  Checked my band plan table all ok as nothing changed from before conversion.  If I manually select log qso from wsjt-x I see a flash on the l32 page but does not go into log.  Something changed from the conversion.

Richard 

W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV

 

Be joyful in hope, patient in affliction, faithful in prayer

 

 

On 01/21/2021 9:01 AM Richard Zalewski <dick.w7zr@...> wrote:

 

 

Yes it is in red!!!  Big clue?

Richard 

W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV

 

Be joyful in hope, patient in affliction, faithful in prayer

On Thu, Jan 21, 2021 at 5:48 AM Bob < k4cy@...> wrote:

QSOs logged from WSJT-X (and its numerous clones are buffered in memnory for a few seconds before being written to the logbook. FT8 QSOs for 5 seconds, FT4 QSOs for 3 seconds. This is so that Logger32 does not waste CPU cycles in the very busy decode cycle between receive and transmit. 73.

On 01/20/2021 10:21 PM Richard Zalewski < dick.w7zr@...> wrote:

 

 

What appears to be happening is some QSOs are being held in some file that is not being processed.  I log a qso manually and I find that a completely different QSO is put at the bottom of the log.

Richard 

W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV

 

Be joyful in hope, patient in affliction, faithful in prayer

On Wed, Jan 20, 2021 at 7:16 PM Bill K4BX via groups.io <k4bx= yahoo.com@groups.io> wrote:

When auto logging FT8 QSO's from JTDX they don't show up at the end of the log.... but when I search for the calls they are found in the log. They just don't seem to be sorted by QSO time. Anyway if you right click on the log and do a search for the contacts you will find them. The Cherry-picking event viewer says the contacts were logged. Don't know why they don't appear at the bottom of the log page.
73 Bill K4BX

On 1/20/2021 7:01 PM, Bob wrote:

Richard, I know nothing about 'auto logging from WSJT-X', or for that matter WSJT-X. There is an option in Logger32 to attempt to bypass/override the requirement to click the mouse on the 'log this QSO' popup (the ARRL requirement for 'contemporaneous user input'. Whatever the hell that is) . If it works - Yay! If it doesn't , then :(

 

SeventyThree(s).

On 01/20/2021 7:14 PM Richard Zalewski <dick.w7zr@...> wrote:

 

 

Auto logging does not seem to be working for FT8.  Checked my band plan table all ok as nothing changed from before conversion.  If I manually select log qso from wsjt-x I see a flash on the l32 page but does not go into log.  Something changed from the conversion.

Richard 

W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV

 

Be joyful in hope, patient in affliction, faithful in prayer

 

 

 

 

On 01/21/2021 10:38 AM Bill K4BX via groups.io <k4bx@...> wrote:

 

 

Yes Bob, Date header is red. I sort log by date so new contacts are at bottom. Another thing I notice is after making a FT8 contact, if I re-enter the callsign, the Previous QSO's window will show the previous contact. So the contact was logged and to find it I right clicked on Log and selected search and it will find it.

73 and thanks for the great software.... Bill K4BX

On 1/21/2021 7:43 AM, Bob wrote:

They just don't seem to be sorted by QSO time ... On the Logbook page window is the QSO DATE column header in red text? 73.

On 01/20/2021 10:16 PM Bill K4BX via groups.io <k4bx@...> wrote:

 

 

When auto logging FT8 QSO's from JTDX they don't show up at the end of the log.... but when I search for the calls they are found in the log. They just don't seem to be sorted by QSO time. Anyway if you right click on the log and do a search for the contacts you will find them. The Cherry-picking event viewer says the contacts were logged. Don't know why they don't appear at the bottom of the log page.
73 Bill K4BX

On 01/21/2021 11:01 AM Richard Zalewski <dick.w7zr@...> wrote:

 

 

More (Sorry)....used L32 search log function and the qso is there.  Just not showing at the bottom of the log indicating the most recent QSO.

Richard 

W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV

 

Be joyful in hope, patient in affliction, faithful in prayer

On Thu, Jan 21, 2021 at 7:55 AM Richard Zalewski via groups.io <dick.w7zr= gmail.com@groups.io> wrote:

More clues: Made a qso ft8 using wsjt.  The logging window flashed on top of the L32 log and then disappeared.  I looked at the adif file in L32 and the qso is there but it is NOT being displayed in the log window.

Richard 

W7ZR ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU, J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV

 

Be joyful in hope, patient in affliction, faithful in prayer

On Thu, Jan 21, 2021 at 7:38 AM Bill K4BX via groups.io <k4bx= yahoo.com@groups.io> wrote:

Yes Bob, Date header is red. I sort log by date so new contacts are at bottom. Another thing I notice is after making a FT8 contact, if I re-enter the callsign, the Previous QSO's window will show the previous contact. So the contact was logged and to find it I right clicked on Log and selected search and it will find it.

73 and thanks for the great software.... Bill K4BX

On 1/21/2021 7:43 AM, Bob wrote:

They just don't seem to be sorted by QSO time ... On the Logbook page window is the QSO DATE column header in red text? 73.

On 01/20/2021 10:16 PM Bill K4BX via groups.io <k4bx@...> wrote:

 

 

When auto logging FT8 QSO's from JTDX they don't show up at the end of the log.... but when I search for the calls they are found in the log. They just don't seem to be sorted by QSO time. Anyway if you right click on the log and do a search for the contacts you will find them. The Cherry-picking event viewer says the contacts were logged. Don't know why they don't appear at the bottom of the log page.
73 Bill K4BX

 

 

 

 

Then I'm confused, if the logbook page window is sorted chronologically, then why is the most recent QSO not at the bottom of the page. 

 

When you find the FT8 QSO by doing a callsign search, what is the QSO DATE/TIME. Where is the discrepancy?  73.