1. Topics
  2. Logging automatically from WSJT-X to Logger32

Logging automatically from WSJT-X to Logger32

Prasad
 

A revised version is now available at: https://goo.gl/cHBKhr

Added a step which was missed out earlier.


73 de Prasad VU2PTT

On Tue, Oct 24, 2017 at 5:38 PM, Prasad VU2PTT <vu2ptt@...> wrote:

If your are using Logger32 for daily logging you may find the below
interesting.

The link below will take you to a document where I have listed my
workaround to log from JTDX to Logger32 TCP server via JTAlertX and a small
windows utility called Socat which basically converts the UDP ADIF data
sent out for each QSO by JTAlertx to TCP into the Logger32 TCP server.

It may sound a bit complex but just follow the steps and once set up it
works very well. I have been using this seamlessly and without issues for
the past few weeks.

Here is the link to the setup document: https://goo.gl/cHBKhr

I have also attached tit to the email in case it comes through. Hope you
will all enjoy it if you do set it up this way - I for one am having fun
logging straight into Logger32 :)


73 de Prasad VU2PTT, W2PTT

ARSI, ARRL, FOC, CWOPS, IFROAR, MARC
NCDXF, INDEXA, SCCC, EUPSK, IOTA-200
ARRL DXCC Card Checker
CQ Awards Checkpoint
Coordinator - VU Contest Group www.vucg.in
Webmaster - Logger32 www.logger32.net
jim_k2qb
 

Prasad thanks so much for this info. i installed it today and it works great! The only thing I noticed is that the State Field is not imported into Logger32. Is that something that can be addressed?
Michael Harris
 

Any news on the progress of a direct interface with wsjt-x without going through layers of software?

Was this the subject of a recent request for testers?

Regards,

Mike VP8NO

On 01/11/2017 15:07, k2qb@... [hamlogger] wrote:
Prasad thanks so much for this info. i installed it today and it works great! The only thing I noticed is that the State Field is not imported into Logger32. Is that something that can be addressed?
ayoshida@...
 

Mike

The final testing has been almost finished.
Maybe coming soon....

73 de aki  ja1nlx


---In hamlogger@..., <mike.harris@...> wrote :

Any news on the progress of a direct interface with wsjt-x without going
through layers of software?

Was this the subject of a recent request for testers?

Regards,

Mike VP8NO

On 01/11/2017 15:07, k2qb@... [hamlogger] wrote:
> Prasad thanks so much for this info. i installed it today and it works great! The only thing I noticed is that the State Field is not imported into Logger32. Is that something that can be addressed?
>

jim_k2qb
 

Well spoke to soon...the interface worked for the first two QSO'S and now for some reason no longer logs the contact into Logger32. I can see the activity in the server window but nothing populates in Logger32. The record ends with NACK with leads me to believe something is in error.
ayoshida@...
 

I am talking about H2S BandMap implemented in next Logger32.

I do not know anything about others.

73 de aki  ja1nlx


---In hamlogger@..., <k2qb@...> wrote :

Well spoke to soon...the interface worked for the first two QSO'S and now for some reason no longer logs the contact into Logger32. I can see the activity in the server window but nothing populates in Logger32. The record ends with NACK with leads me to believe something is in error.
Michael Harris
 

No idea what H2S Bandmap is. I was under the impression, mistaken perhaps, that a direct link between XSJT-X and L32 to import log info was in development. The JTalert/SOCAT method is an impressive workaround, however, it throws two extra layers of software at the problem.

Regards,

Mike VP8NO

On 01/11/2017 21:05, ayoshida@... [hamlogger] wrote:
I am talking about H2S BandMap implemented in next Logger32.
I do not know anything about others.
73 de aki ja1nlx
---In hamlogger@..., <k2qb@...> wrote :
Well spoke to soon...the interface worked for the first two QSO'S and now for some reason no longer logs the contact into Logger32. I can see the activity in the server window but nothing populates in Logger32. The record ends with NACK with leads me to believe something is in error.
Tibor OM2GM
 

Hi Mike,

Please make following steps and You will discover all advantages.

·        Start up WSJT-x (there is WSJT-x 1.8.0.0 available to download) on the computer

Install the Beta version of Logger 32 from downloaded ZIP file created by Jim w5ifp here https://www.dropbox.com/s/4uixd0od239u56u/Logger32%20ver3.50.335-53.zip?dl=0

·        Copy unzipped content to Your Logger start directory/folder

·        Start Logger with as administrator

·        Right click on H2S in the lowest bottom line of Logger 32 window

·        Start H2S

·        Right click on opened H2S pane choise settings option and check Allow auto logging (if not already checked.

Work with WSJT-x and time to time check if in Logger 32 is QSO added a second after  pressing of LOG QSO or OK for logging in WSJT-x

No 3rd or 4th sw install needed

And it Works !!!

 

Tibor OM2GM

 

From: hamlogger@... [mailto:hamlogger@...]
Sent: 2. novembra 2017 12:39
To: hamlogger@...
Subject: Re: [hamlogger] Re: Logging automatically from WSJT-X to Logger32

 

 

No idea what H2S Bandmap is. I was under the impression, mistaken
perhaps, that a direct link between XSJT-X and L32 to import log info
was in development. The JTalert/SOCAT method is an impressive
workaround, however, it throws two extra layers of software at the problem.

Regards,

Mike VP8NO

On 01/11/2017 21:05, ayoshida@... [hamlogger] wrote:
> I am talking about H2S BandMap implemented in next Logger32.
>
> I do not know anything about others.
>
> 73 de aki ja1nlx
>
>
> ---In hamlogger@..., <k2qb@...> wrote :
>
> Well spoke to soon...the interface worked for the first two QSO'S and now for some reason no longer logs the contact into Logger32. I can see the activity in the server window but nothing populates in Logger32. The record ends with NACK with leads me to believe something is in error.
>

F5SZY
 

Hello Tibor

I read your informations on yahoo group about Logger32 v3.50.335-53 beta
Is it possible to install this new beta version on my Logger32 3.50.335 ?
I'm careful I'm doing a backup for security before
Thank you in advance for your answer.

Best 73's de F5SZY / Yves
Michael Harris
 

Hi Tibor,

That Beta file seems to have been removed. Will hold my fire and wait for further information.

Regards,

Mike VP8NO

On 02/11/2017 08:50, tibor@... [hamlogger] wrote:
Hi Mike,
Please make following steps and You will discover all advantages.
· Start up WSJT-x (there is WSJT-x 1.8.0.0 available to download) on the computer
Install the Beta version of Logger 32 from downloaded ZIP file created by Jim w5ifp here https://www.dropbox.com/s/4uixd0od239u56u/Logger32%20ver3.50.335-53.zip?dl=0
· Copy unzipped content to Your Logger start directory/folder
· Start Logger with as administrator
· Right click on H2S in the lowest bottom line of Logger 32 window
· Start H2S
· Right click on opened H2S pane choise settings option and check Allow auto logging (if not already checked.
Work with WSJT-x and time to time check if in Logger 32 is QSO added a second after pressing of LOG QSO or OK for logging in WSJT-x
No 3rd or 4th sw install needed
And it Works !!!
Tibor OM2GM
From: hamlogger@... [mailto:hamlogger@...]
Sent: 2. novembra 2017 12:39
To: hamlogger@...
Subject: Re: [hamlogger] Re: Logging automatically from WSJT-X to Logger32
No idea what H2S Bandmap is. I was under the impression, mistaken
perhaps, that a direct link between XSJT-X and L32 to import log info
was in development. The JTalert/SOCAT method is an impressive
workaround, however, it throws two extra layers of software at the problem.
Regards,
Mike VP8NO
On 01/11/2017 21:05, ayoshida@... <mailto:ayoshida@...> [hamlogger] wrote:
I am talking about H2S BandMap implemented in next Logger32.

I do not know anything about others.

73 de aki ja1nlx


---In hamlogger@... <mailto:hamlogger@...> , <k2qb@... <mailto:k2qb@...> > wrote :

Well spoke to soon...the interface worked for the first two QSO'S and now for some reason no longer logs the contact into Logger32. I can see the activity in the server window but nothing populates in Logger32. The record ends with NACK with leads me to believe something is in error.
Tibor OM2GM
 

Yves,
Yes, you can overwrite the released l32.
Jim is going to publish it in the next released official (auto update) Logger32.
I have it already in use and no problem admired by Digital or conventional CW or SSB operation.

Tibor Fuzik
Sent from smartphone



---- dxcc17@... [hamlogger] wrote ----

 

Hello Tibor

I read your informations on yahoo group about Logger32 v3.50.335-53 beta
Is it possible to install this new beta version on my Logger32 3.50.335 ?
I'm careful I'm doing a backup for security before
Thank you in advance for your answer.

Best 73's de F5SZY / Yves
John Owens
 

Sorry, but I find no mention of H2S at the bottom line of L32, nor do I find it mentioned in the HELP file.

John Owens - N7TK
ayoshida@...
 

It is called "UDP" now and not "H2S"  Look for "UDP" at lower status bar.
In the latest Help you still see "H2S" and not "UDP". Help will be changed in the next Help release.

73 de aki  ja1nlx


---In hamlogger@..., <jcowens1@...> wrote :

Sorry, but I find no mention of H2S at the bottom line of L32, nor do I find it mentioned in the HELP file.

John Owens - N7TK
Hew Lines
 

The current Helpfile is on the Logger32 release site, as they always have been,  and does reference H2S. A new helpfile will be released soon with the changes to refer to UPD instead of H2S.

73 - Hew VA7HU

Helpfile editor



On 2017-11-03 4:27 PM, jcowens1@... [hamlogger] wrote:

 

Sorry, but I find no mention of H2S at the bottom line of L32, nor do I find it mentioned in the HELP file.


John Owens - N7TK
Hew Lines
 

Make that "UDP"  :=((

73 - |Hew



On 2017-11-03 4:47 PM, Hew Lines hewlines@... [hamlogger] wrote:

 

The current Helpfile is on the Logger32 release site, as they always have been,  and does reference H2S. A new helpfile will be released soon with the changes to refer to UPD instead of H2S.

73 - Hew VA7HU

Helpfile editor



On 2017-11-03 4:27 PM, jcowens1@... [hamlogger] wrote:
 

Sorry, but I find no mention of H2S at the bottom line of L32, nor do I find it mentioned in the HELP file.


John Owens - N7TK
John Owens
 

I tried to load the beta site mentioned, but it said it was not there. I am running the latest version (automatic release) and could not find mention of H2S or UPD. Please clarify.

John Owens - N7TK
ayoshida@...
 

What is version number ?

The latest auto update version is 3.50.336.

73 de aki  ja1nlx




---In hamlogger@..., <jcowens1@...> wrote :

I tried to load the beta site mentioned, but it said it was not there. I am running the latest version (automatic release) and could not find mention of H2S or UPD. Please clarify.

John Owens - N7TK
Hew Lines
 

John it is not on the "Beta" site. It is on the Logger32 Home site



On 2017-11-03 4:55 PM, jcowens1@... [hamlogger] wrote:

 

I tried to load the beta site mentioned, but it said it was not there. I am running the latest version (automatic release) and could not find mention of H2S or UPD. Please clarify.


John Owens - N7TK
Michael Harris
 

Interesting to read all this, however, my L32 (335) is unable to find any update, manual or automatic. First time I've seen this problem.

In auto when the notice about checking for updates eventually pops up, a couple of seconds later the notice of no updates follows. If after that I do a manual check the notice of no updates shows almost instantly after the checking pop up. This may be normal, I don't know, because I have always done manual updates.

Regards,

Mike VP8NO
John Owens
 

Aki:

I was running 3.50.336, but am now running the new release 3.50.337.

John Owens - N7TK
1 - 20 of 25