Bob I would be glad to help test Ver 4. I've been with you since the days of Logger16 and Zaknaka. 73, Chuck N0NC

Some how VOX got changed to MOX in the winkey setup screen. I have to use VOX because I have PTT on a different serial port. IAW, I don't use the PTT output of the winkeyer. Thanks, and 73 Chuck N0NC

Just upgraded to 3.50.423 and CW machine is delayed. ie. if I press the function key for may call sign it sends nothing, until I enter something further then in sends the whole thing. Just started wit

I have an if-output installed in the Ft1000mp mkv field and the rsp1a connected to that. Then connected SDR-console to the Yaesu using Omni-Rig and then I connect Logger32 to the sdr-console using the

Bob; Thanks again for all your help. I did learn a lot about SDRs and logger 32 configuration. I looked at some other loggers to see if they might work. In the end, I made up my mind that if it was a

Well, while that did fix the problem with the erratic frequency, it turns out that since I am using a "IF" tap from the Yaesu, Omni-Rig has to talk directly to the FT-1000mp or it doesn't get any RF a

Well I've finally got it to work by connecting it backwards. I can't do it the way Rick does, I don't think he uses an if tap. I have one installed in the Yaesu, and SDR-console has to talk directly t

Here's the radio debug window; and here's the slave debug window; I've changed to use a different USB to RS-232 adapter cable. 73, Chuck N0NC

I even slowed the baud rate on both ends to 4800, (same as the ft1000mp), but still get erratic results. N0NC

Actually it was set to 600 ms. I changed it 100 ms, and then 200 ms as you asked, same result erratic data sent to SDR 73, cHUCK N0NC

Step 1 Done Step 2 Done nothing happens Step 3 a. yes b. yes c. d. sdr-cosole tunes to 7.030.005.625 e. SDR-COnsole recieves no rf 73, Chuck N0NC

Bob and Rick, I've tried all the things you've suggested, and some times it looks like it's trying to work, but L32 keeps flashing a message that band plan has no entries for 142.619375 mhz, which is

Rick I tried exactly what you said, right down to the port numbers. It doesn't work. In fact, it interferes with L32 controlling the rig (can't change modes ect.) until I close sdr-console. I think I'

Thanks Rick; I'll give that a try. I thought I had already, but I was changing so many things, I'll follow your example exactly. Been away for a few days at the VA hospital. I'll report back after I t

Yep, thats the way it should be connected, rig to L32 and SDR on the slave port. But when I configure it that way it doesn't work. In my grasping at straws, I hook it up backwards, rig to SDR, and l32

I was able to get it to sort of work. I ran Sdr-console external radio window thru omni-rig to the FT-1000mp mkV field on port 10 that got Sdr-console working. Then I created a virtual serial port wit

Thanks aki for your help. quote "Please read The Slave Port section in the Logger32 Help. It explains a sample with ic7300/RSP1A/SDRConsole. Maybe it will help you." /quote I tried it exactly the way

How do I get L32 and SDR Console to talk to my FT-1000mp Mk V Field? Logger32 does not work with Omnirig, but SDR Console seems to require it. SDR Console says use TS-2000 protocol, but logger32 does