Ok, now here is something strange. Late yesterday afternoon all three computers connected back to Telnet and have been working just fine all day. They just started working up out of the blue. No idea

I also forgot mention that I turned off all the computers, powered down the modem, router, and both switches. Left them off for 5 minutes and powered up the modem, waited a minute, powered up the rout

Here is the latest up date on my Winsock problem. I have logger32 running on 3 different computers, 2 desk tops and one lap top. I took Jim’s advise and downloaded and installed 3.50 from the web site

Here is a thought. I don’t write code or do any kind of programming, but something in logger32 calls up and initializes winsock and the cluster window., more than likely the cluster window and the out

Jim - I can click OK all day and it never goes away. Doesn’t matter if I am trying to connect to Telnet or local host. I have never had any update problems or club log update problems – both are set t

Rick - I tried turning off Windows Fire Wall and experienced the same problem. I even put the entire logger32 into Windows Defender exceptions with the same results. Larry K8YYY "Never interrupt some

OK, this has probably been covered before but here is my problem. Winsock suddenly stopped working a few days ago with the error message: “From Telnet Socket Winsock returned: Invalid Operation at Cur

Probably need to have the grid number ad well as the grid letters, such as JF01 or whatever. JF is too generic for grid square chasing.. Larry K8YYY "Never interrupt some one doing something you said

Thanks for all the help guys. I have it disabled in all power setting now. If it continues I am thinking the Rig Blaster USB might be going south. Hoping it is not. Larry K8YYY "Never interrupt some o

Thanks Dave – forgot about the power settings. Will check them. Larry K8YYY "Never interrupt some one doing something you said couldn't be done" Amelia Earhart Virus-free. www.avg.com

Jim - Thanks for the quick reply. Just checked the properties for the Comm Ports in Device manager and there is no way to check for Sleep. Even under the power setting Tab I found. I did however find

Has anyone experienced logger32 dropping the frequency in the main logging window and then giving the message (par-phrasing here) that 0.000 is not a valid frequency. If I acknowledge and close the er

Just got this from the WVDXA president. Maybe it will help. Amendment to ARRL DXCC Rules Will Expand DXCC List01/23/2018 The ARRL Board of Directors approved a motion to amend the DXCC Rules, when it

Sorry but I don’t know where to put the start date in. I just copied this from another e-mail. I am pretty sure that Club Log will put that in when it is Official as will LOtW. Right now all I know is

Country - Republic of Kosovo Prefix - Z6 Start date (not official yet) - January 21, 2018 1 hour a head of UTC CQ Zone - 15 ITU Zone - 28 Continent - Europe Longitude - 21.17 East Latitude - 42.67 Nor

Thanks for the solution Jim. I appreciate it and the program for all its versatility. Larry K8YYY "Never interrupt some one doing something you said couldn't be done" Amelia Earhart Virus-free. www.av

Is there any way to do a log search with a wild card? That is say */KL7 vs KL7. The WAS stats show that I have KL7 worked on 160 which is the only state I still need for 160 WAS. I have tried all the

I have win 10 on all my machines as well and the 7600 works with no problems, either with logger 32 or FT8, but I do run them on separate computers. I use FT8 on an IC-7410 and it is dedicated to that

That one has been down permanently for months. try another- I use k1eu. K8YYY "To be a Christian means to forgive the inexcusable, because God has forgiven the inexcusable in us." C.S. Lewis Virus-fre

Amen Dave! I don’t even have FT8 working yet, but I appreciated all the hard work that went into making the update happen. My vote is to restore it and let him search else where if he doesn’t like it.