Date   
Re: Errors when I import ADI file

Bob <k4cy@...>
 

I tested the code ... The ADIF record shows you transmitted on 14.0000. This is probably illegal (even in Spain). The frequency in the ADIF must be less than the upper band edge in the BandPlan and higher than the lower band edge in the Band Plan. As a temporary workaround, modify your BandPlan so that the lowest 20M frequency is 13.9999. SeventyThree(s).

On September 23, 2019 at 5:36 PM "ea2bjm@..." <ea2bjm@...> wrote:

Hello:

I am having about 500 errors of 6.000 QSO when I import a ADI file from other Ham logger program.
Here is one of the examples for the BAD.adi file.

Error : Frequency does not appear to be in the 20M Band:  <QSO_DATE:8>20190828<TIME_ON:4>2050<CALL:7>SWL5868<RST_RCVD:2>59<BAND:3>20m<FREQ:2>14<MODE:3>SSB<SWL:1>Y<QSL_SENT:1>Y<QSL_SENT_VIA:1>E<QSL_RCVD:1>Y<QSL_RCVD_VIA:1>E<PROP_MODE:2>TR<GRIDSQUARE:6>JN45MT<NAME:5>Marco<QSO_COMPL:3>YES<OPERATOR:6>EA2BJM<OWN_GRIDSQ:6>IN91NQ<DXCC:3>236<CQZ:2>20<ITUZ:2>28<CONT:2>EU<TX_PWR:3>100<RIG:14>Yaesu FT-2000D<RND_METEORS:1>N<MS_SHOWER:1>N<FORCE_INIT:1>N<EOR>

Please can anyone to help me with this problem.

Thank you in advance.

Best regards.

Miguel Tapia
ea2bjm@...
607743851.
 
Antes de imprimir el mensaje asegúrate de que es necesario. Ahorra papel, ahorra consumo de recursos
         Before printing this message, make sure it is necessary. Save paper, save resources.


 


 

Re: Errors when I import ADI file

ea2bjm@migueltapia.com
 

Thank you. That is the question.

73.

Miguel Tapia
ea2bjm@...
607743851.
 
Antes de imprimir el mensaje asegúrate de que es necesario. Ahorra papel, ahorra consumo de recursos
         Before printing this message, make sure it is necessary. Save paper, save resources.

El 23 sept 2019, a las 23:50, Bob <k4cy@...> escribió:

The ADIF record shows <BAND:3>20m<FREQ:2>14 If you look at your BandPlan for 20M (click TOOLS | SETUP BANDS & MODES) , what do you see for 20M? I see this:


<Noname.bmp>


It shows that the lowest frequency for 20M is 14.000000 MHz. What does your show? SeventyThree(s).


On September 23, 2019 at 5:36 PM "ea2bjm@..." <ea2bjm@...> wrote:

Hello:

I am having about 500 errors of 6.000 QSO when I import a ADI file from other Ham logger program.
Here is one of the examples for the BAD.adi file.

Error : Frequency does not appear to be in the 20M Band:  <QSO_DATE:8>20190828<TIME_ON:4>2050<CALL:7>SWL5868<RST_RCVD:2>59<BAND:3>20m<FREQ:2>14<MODE:3>SSB<SWL:1>Y<QSL_SENT:1>Y<QSL_SENT_VIA:1>E<QSL_RCVD:1>Y<QSL_RCVD_VIA:1>E<PROP_MODE:2>TR<GRIDSQUARE:6>JN45MT<NAME:5>Marco<QSO_COMPL:3>YES<OPERATOR:6>EA2BJM<OWN_GRIDSQ:6>IN91NQ<DXCC:3>236<CQZ:2>20<ITUZ:2>28<CONT:2>EU<TX_PWR:3>100<RIG:14>Yaesu FT-2000D<RND_METEORS:1>N<MS_SHOWER:1>N<FORCE_INIT:1>N<EOR>

Please can anyone to help me with this problem.

Thank you in advance.

Best regards.

Miguel Tapia
ea2bjm@...
607743851.
 
Antes de imprimir el mensaje asegúrate de que es necesario. Ahorra papel, ahorra consumo de recursos
         Before printing this message, make sure it is necessary. Save paper, save resources.


 


 


Re: FTDX-101D or FTDX-101MP

ja1nlx
 

Vince

Thanks

73

On 2019/09/24 5:58, Vince Shirley wrote:
Erm.,  sorry to state the obvious Aki, but its Yaesu FT-101D

Vince G0ORC....

On Sun, 22 Sep 2019, 08:08 ja1nlx, <ayoshida0205@...> wrote:
Is there anyone who is using FTDX-101D or FTDX-101MP ?

Which radio you select in Setup radio table ?

Thanks

--
73 de aki
JA1NLX



--
73 de aki
JA1NLX

Re: Errors when I import ADI file

Bob <k4cy@...>
 

The ADIF record shows <BAND:3>20m<FREQ:2>14 If you look at your BandPlan for 20M (click TOOLS | SETUP BANDS & MODES) , what do you see for 20M? I see this:




It shows that the lowest frequency for 20M is 14.000000 MHz. What does your show? SeventyThree(s).


On September 23, 2019 at 5:36 PM "ea2bjm@..." <ea2bjm@...> wrote:

Hello:

I am having about 500 errors of 6.000 QSO when I import a ADI file from other Ham logger program.
Here is one of the examples for the BAD.adi file.

Error : Frequency does not appear to be in the 20M Band:  <QSO_DATE:8>20190828<TIME_ON:4>2050<CALL:7>SWL5868<RST_RCVD:2>59<BAND:3>20m<FREQ:2>14<MODE:3>SSB<SWL:1>Y<QSL_SENT:1>Y<QSL_SENT_VIA:1>E<QSL_RCVD:1>Y<QSL_RCVD_VIA:1>E<PROP_MODE:2>TR<GRIDSQUARE:6>JN45MT<NAME:5>Marco<QSO_COMPL:3>YES<OPERATOR:6>EA2BJM<OWN_GRIDSQ:6>IN91NQ<DXCC:3>236<CQZ:2>20<ITUZ:2>28<CONT:2>EU<TX_PWR:3>100<RIG:14>Yaesu FT-2000D<RND_METEORS:1>N<MS_SHOWER:1>N<FORCE_INIT:1>N<EOR>

Please can anyone to help me with this problem.

Thank you in advance.

Best regards.

Miguel Tapia
ea2bjm@...
607743851.
 
Antes de imprimir el mensaje asegúrate de que es necesario. Ahorra papel, ahorra consumo de recursos
         Before printing this message, make sure it is necessary. Save paper, save resources.


 


 

Errors when I import ADI file

ea2bjm@migueltapia.com
 

Hello:

I am having about 500 errors of 6.000 QSO when I import a ADI file from other Ham logger program.
Here is one of the examples for the BAD.adi file.

Error : Frequency does not appear to be in the 20M Band:  <QSO_DATE:8>20190828<TIME_ON:4>2050<CALL:7>SWL5868<RST_RCVD:2>59<BAND:3>20m<FREQ:2>14<MODE:3>SSB<SWL:1>Y<QSL_SENT:1>Y<QSL_SENT_VIA:1>E<QSL_RCVD:1>Y<QSL_RCVD_VIA:1>E<PROP_MODE:2>TR<GRIDSQUARE:6>JN45MT<NAME:5>Marco<QSO_COMPL:3>YES<OPERATOR:6>EA2BJM<OWN_GRIDSQ:6>IN91NQ<DXCC:3>236<CQZ:2>20<ITUZ:2>28<CONT:2>EU<TX_PWR:3>100<RIG:14>Yaesu FT-2000D<RND_METEORS:1>N<MS_SHOWER:1>N<FORCE_INIT:1>N<EOR>

Please can anyone to help me with this problem.

Thank you in advance.

Best regards.

Miguel Tapia
ea2bjm@...
607743851.
 
Antes de imprimir el mensaje asegúrate de que es necesario. Ahorra papel, ahorra consumo de recursos
         Before printing this message, make sure it is necessary. Save paper, save resources.

Re: FTDX-101D or FTDX-101MP

Vince Shirley
 

Erm.,  sorry to state the obvious Aki, but its Yaesu FT-101D

Vince G0ORC....

On Sun, 22 Sep 2019, 08:08 ja1nlx, <ayoshida0205@...> wrote:
Is there anyone who is using FTDX-101D or FTDX-101MP ?

Which radio you select in Setup radio table ?

Thanks

--
73 de aki
JA1NLX



Re: log set up

Dave Colliau
 

Bob ... I am with you. Keep up the good work and the humor :) .

Dave N8DC

On September 23, 2019 at 3:44 PM Bob <k4cy@...> wrote:

A Freudian slip. Fort Smith is in AR, not AK. Guess my subconscious wanted me as far away as the Clintons home State as possible. Apologies. SeventyThree(s).

On September 23, 2019 at 2:38 PM Bob <k4cy@...> wrote:

I was about to say (before I fat fingered the keyboard) ... Failing that, I assume you're somewhere between Fort Smith AK and Tulsa OK. Maybe some Logger32 user in the vicinity can offer you some 'hands-on'. 73.

On September 23, 2019 at 2:35 PM Bob <k4cy@...> wrote:

It's hard to offer help without any knowledge of the problem(s) you are facing. One show-stopping at a time ... First problem? Failing that, 

On September 23, 2019 at 2:27 PM "sallisawfireman via Groups.Io" <sallisawfireman@...> wrote:

i'm having problems getting my logger 32 set up, I sure could use some help


 


 


 


 

Re: log set up

Bob <k4cy@...>
 

A Freudian slip. Fort Smith is in AR, not AK. Guess my subconscious wanted me as far away as the Clintons home State as possible. Apologies. SeventyThree(s).

On September 23, 2019 at 2:38 PM Bob <k4cy@...> wrote:

I was about to say (before I fat fingered the keyboard) ... Failing that, I assume you're somewhere between Fort Smith AK and Tulsa OK. Maybe some Logger32 user in the vicinity can offer you some 'hands-on'. 73.

On September 23, 2019 at 2:35 PM Bob <k4cy@...> wrote:

It's hard to offer help without any knowledge of the problem(s) you are facing. One show-stopping at a time ... First problem? Failing that, 

On September 23, 2019 at 2:27 PM "sallisawfireman via Groups.Io" <sallisawfireman@...> wrote:

i'm having problems getting my logger 32 set up, I sure could use some help


 


 

Re: log set up

Bob <k4cy@...>
 

Maybe you should too? Lots of local help available. 73.

On September 23, 2019 at 2:43 PM "sallisawfireman via Groups.Io" <sallisawfireman@...> wrote:

yes I,m in Sallisaw, most ever one here uses log book of the world or eqsl

Re: log set up

Bob <k4cy@...>
 

There are three steps involved 1) Download. 2) Install and 3) Run the program. Which one failed? I am not familiar with an "application failed" error message. Any chance of a picture? 73.

On September 23, 2019 at 2:41 PM "sallisawfireman via Groups.Io" <sallisawfireman@...> wrote:

I've downloaded the program into my computer , but that's as far as it will let me go, it says application failed

Re: log set up

sallisawfireman@...
 

yes I,m in Sallisaw, most ever one here uses log book of the world or eqsl

Re: log set up

sallisawfireman@...
 

I've downloaded the program into my computer , but that's as far as it will let me go, it says application failed

Re: log set up

Bob <k4cy@...>
 

I was about to say (before I fat fingered the keyboard) ... Failing that, I assume you're somewhere between Fort Smith AK and Tulsa OK. Maybe some Logger32 user in the vicinity can offer you some 'hands-on'. 73.

On September 23, 2019 at 2:35 PM Bob <k4cy@...> wrote:

It's hard to offer help without any knowledge of the problem(s) you are facing. One show-stopping at a time ... First problem? Failing that, 

On September 23, 2019 at 2:27 PM "sallisawfireman via Groups.Io" <sallisawfireman@...> wrote:

i'm having problems getting my logger 32 set up, I sure could use some help


 

Re: log set up

Bob <k4cy@...>
 

It's hard to offer help without any knowledge of the problem(s) you are facing. One show-stopping at a time ... First problem? Failing that, 

On September 23, 2019 at 2:27 PM "sallisawfireman via Groups.Io" <sallisawfireman@...> wrote:

i'm having problems getting my logger 32 set up, I sure could use some help

log set up

sallisawfireman@...
 

i'm having problems getting my logger 32 set up, I sure could use some help

Re: Wierd thing CW Machine.

Dave Colliau
 

That was it. Thanks Bob.
Dave N8DC

On September 22, 2019 at 12:21 PM Bob <k4cy@...> wrote:


On Logger32 (not the CW Machine) click SETUP | HOTKEYS. Move the mouse to F1 - F10 TO CLICK MACRO KEYS. Make sure F1 (and F1 - F10) UNchecked. If it is, then Logger32 will capture the F'ing keys and the CW Machine will not see them being pressed. SeventyThree(s).

On September 22, 2019 at 11:46 AM Dave Colliau <n8dc-8@...> wrote:


Seems when I start logger 32 and the cw machine and I use F1 which is set up to send my call sign it works one time then quits until I reboot the program . Nothing else running except Mozilla on the 2nd monitor. I thought I had a bad KYBD so I changed it out only to find the same thing. I can move that macro but it just seems strange.
Dave N8DC



Re: Wierd thing CW Machine.

Bob <k4cy@...>
 

On Logger32 (not the CW Machine) click SETUP | HOTKEYS. Move the mouse to F1 - F10 TO CLICK MACRO KEYS. Make sure F1 (and F1 - F10) UNchecked. If it is, then Logger32 will capture the F'ing keys and the CW Machine will not see them being pressed. SeventyThree(s).

On September 22, 2019 at 11:46 AM Dave Colliau <n8dc-8@...> wrote:


Seems when I start logger 32 and the cw machine and I use F1 which is set up to send my call sign it works one time then quits until I reboot the program . Nothing else running except Mozilla on the 2nd monitor. I thought I had a bad KYBD so I changed it out only to find the same thing. I can move that macro but it just seems strange.
Dave N8DC


Re: Wierd thing CW Machine.

Dave Colliau
 

Seems when I start logger 32 and the cw machine and I use F1 which is set up to send my call sign it works one time then quits until I reboot the program . Nothing else running except Mozilla on the 2nd monitor. I thought I had a bad KYBD so I changed it out only to find the same thing. I can move that macro but it just seems strange.
Dave N8DC

FTDX-101D or FTDX-101MP

ja1nlx
 

Is there anyone who is using FTDX-101D or FTDX-101MP ?

Which radio you select in Setup radio table ?

Thanks

--
73 de aki
JA1NLX

Re: FT8 UDP

Bob <k4cy@...>
 

No problem, do not start WSJT/JTDX with the START menu on the UDP BandMap. Start WSJT/JTDX bu double clicking on the desktop icon. SeventyThree(s).