Date   
Errors when I import ADI file

ea2bjm@migueltapia.com
 

Hello:

I am having about 500 errors of 6.000 QSO when I import a ADI file from other Ham logger program.
Here is one of the examples for the BAD.adi file.

Error : Frequency does not appear to be in the 20M Band:  <QSO_DATE:8>20190828<TIME_ON:4>2050<CALL:7>SWL5868<RST_RCVD:2>59<BAND:3>20m<FREQ:2>14<MODE:3>SSB<SWL:1>Y<QSL_SENT:1>Y<QSL_SENT_VIA:1>E<QSL_RCVD:1>Y<QSL_RCVD_VIA:1>E<PROP_MODE:2>TR<GRIDSQUARE:6>JN45MT<NAME:5>Marco<QSO_COMPL:3>YES<OPERATOR:6>EA2BJM<OWN_GRIDSQ:6>IN91NQ<DXCC:3>236<CQZ:2>20<ITUZ:2>28<CONT:2>EU<TX_PWR:3>100<RIG:14>Yaesu FT-2000D<RND_METEORS:1>N<MS_SHOWER:1>N<FORCE_INIT:1>N<EOR>

Please can anyone to help me with this problem.

Thank you in advance.

Best regards.

Miguel Tapia
ea2bjm@...
607743851.
 
Antes de imprimir el mensaje asegúrate de que es necesario. Ahorra papel, ahorra consumo de recursos
         Before printing this message, make sure it is necessary. Save paper, save resources.

Re: FTDX-101D or FTDX-101MP

Vince Shirley
 

Erm.,  sorry to state the obvious Aki, but its Yaesu FT-101D

Vince G0ORC....

On Sun, 22 Sep 2019, 08:08 ja1nlx, <ayoshida0205@...> wrote:
Is there anyone who is using FTDX-101D or FTDX-101MP ?

Which radio you select in Setup radio table ?

Thanks

--
73 de aki
JA1NLX



Re: log set up

Dave Colliau
 

Bob ... I am with you. Keep up the good work and the humor :) .

Dave N8DC

On September 23, 2019 at 3:44 PM Bob <k4cy@...> wrote:

A Freudian slip. Fort Smith is in AR, not AK. Guess my subconscious wanted me as far away as the Clintons home State as possible. Apologies. SeventyThree(s).

On September 23, 2019 at 2:38 PM Bob <k4cy@...> wrote:

I was about to say (before I fat fingered the keyboard) ... Failing that, I assume you're somewhere between Fort Smith AK and Tulsa OK. Maybe some Logger32 user in the vicinity can offer you some 'hands-on'. 73.

On September 23, 2019 at 2:35 PM Bob <k4cy@...> wrote:

It's hard to offer help without any knowledge of the problem(s) you are facing. One show-stopping at a time ... First problem? Failing that, 

On September 23, 2019 at 2:27 PM "sallisawfireman via Groups.Io" <sallisawfireman@...> wrote:

i'm having problems getting my logger 32 set up, I sure could use some help


 


 


 


 

Re: log set up

Bob <k4cy@...>
 

A Freudian slip. Fort Smith is in AR, not AK. Guess my subconscious wanted me as far away as the Clintons home State as possible. Apologies. SeventyThree(s).

On September 23, 2019 at 2:38 PM Bob <k4cy@...> wrote:

I was about to say (before I fat fingered the keyboard) ... Failing that, I assume you're somewhere between Fort Smith AK and Tulsa OK. Maybe some Logger32 user in the vicinity can offer you some 'hands-on'. 73.

On September 23, 2019 at 2:35 PM Bob <k4cy@...> wrote:

It's hard to offer help without any knowledge of the problem(s) you are facing. One show-stopping at a time ... First problem? Failing that, 

On September 23, 2019 at 2:27 PM "sallisawfireman via Groups.Io" <sallisawfireman@...> wrote:

i'm having problems getting my logger 32 set up, I sure could use some help


 


 

Re: log set up

Bob <k4cy@...>
 

Maybe you should too? Lots of local help available. 73.

On September 23, 2019 at 2:43 PM "sallisawfireman via Groups.Io" <sallisawfireman@...> wrote:

yes I,m in Sallisaw, most ever one here uses log book of the world or eqsl

Re: log set up

Bob <k4cy@...>
 

There are three steps involved 1) Download. 2) Install and 3) Run the program. Which one failed? I am not familiar with an "application failed" error message. Any chance of a picture? 73.

On September 23, 2019 at 2:41 PM "sallisawfireman via Groups.Io" <sallisawfireman@...> wrote:

I've downloaded the program into my computer , but that's as far as it will let me go, it says application failed

Re: log set up

sallisawfireman@...
 

yes I,m in Sallisaw, most ever one here uses log book of the world or eqsl

Re: log set up

sallisawfireman@...
 

I've downloaded the program into my computer , but that's as far as it will let me go, it says application failed

Re: log set up

Bob <k4cy@...>
 

I was about to say (before I fat fingered the keyboard) ... Failing that, I assume you're somewhere between Fort Smith AK and Tulsa OK. Maybe some Logger32 user in the vicinity can offer you some 'hands-on'. 73.

On September 23, 2019 at 2:35 PM Bob <k4cy@...> wrote:

It's hard to offer help without any knowledge of the problem(s) you are facing. One show-stopping at a time ... First problem? Failing that, 

On September 23, 2019 at 2:27 PM "sallisawfireman via Groups.Io" <sallisawfireman@...> wrote:

i'm having problems getting my logger 32 set up, I sure could use some help


 

Re: log set up

Bob <k4cy@...>
 

It's hard to offer help without any knowledge of the problem(s) you are facing. One show-stopping at a time ... First problem? Failing that, 

On September 23, 2019 at 2:27 PM "sallisawfireman via Groups.Io" <sallisawfireman@...> wrote:

i'm having problems getting my logger 32 set up, I sure could use some help

log set up

sallisawfireman@...
 

i'm having problems getting my logger 32 set up, I sure could use some help

Re: Wierd thing CW Machine.

Dave Colliau
 

That was it. Thanks Bob.
Dave N8DC

On September 22, 2019 at 12:21 PM Bob <k4cy@...> wrote:


On Logger32 (not the CW Machine) click SETUP | HOTKEYS. Move the mouse to F1 - F10 TO CLICK MACRO KEYS. Make sure F1 (and F1 - F10) UNchecked. If it is, then Logger32 will capture the F'ing keys and the CW Machine will not see them being pressed. SeventyThree(s).

On September 22, 2019 at 11:46 AM Dave Colliau <n8dc-8@...> wrote:


Seems when I start logger 32 and the cw machine and I use F1 which is set up to send my call sign it works one time then quits until I reboot the program . Nothing else running except Mozilla on the 2nd monitor. I thought I had a bad KYBD so I changed it out only to find the same thing. I can move that macro but it just seems strange.
Dave N8DC



Re: Wierd thing CW Machine.

Bob <k4cy@...>
 

On Logger32 (not the CW Machine) click SETUP | HOTKEYS. Move the mouse to F1 - F10 TO CLICK MACRO KEYS. Make sure F1 (and F1 - F10) UNchecked. If it is, then Logger32 will capture the F'ing keys and the CW Machine will not see them being pressed. SeventyThree(s).

On September 22, 2019 at 11:46 AM Dave Colliau <n8dc-8@...> wrote:


Seems when I start logger 32 and the cw machine and I use F1 which is set up to send my call sign it works one time then quits until I reboot the program . Nothing else running except Mozilla on the 2nd monitor. I thought I had a bad KYBD so I changed it out only to find the same thing. I can move that macro but it just seems strange.
Dave N8DC


Re: Wierd thing CW Machine.

Dave Colliau
 

Seems when I start logger 32 and the cw machine and I use F1 which is set up to send my call sign it works one time then quits until I reboot the program . Nothing else running except Mozilla on the 2nd monitor. I thought I had a bad KYBD so I changed it out only to find the same thing. I can move that macro but it just seems strange.
Dave N8DC

FTDX-101D or FTDX-101MP

ja1nlx
 

Is there anyone who is using FTDX-101D or FTDX-101MP ?

Which radio you select in Setup radio table ?

Thanks

--
73 de aki
JA1NLX

Re: FT8 UDP

Bob <k4cy@...>
 

No problem, do not start WSJT/JTDX with the START menu on the UDP BandMap. Start WSJT/JTDX bu double clicking on the desktop icon. SeventyThree(s).


Re: FT8 UDP

Alexey Antipov
 

Hi All,
Is there an option to keep Logger32 reading frequency (control radio) when you turn on WSJTX? I use two comm ports on my radio, one is assigned to L32, another set for WSJT control and I have no reason to switch a port between applications. Every time after WSJT launch from L32 I go to settings - radio - open port to have my band map window on the same band as the radio is on.
Thanks,

Alexey / NW7M


On Fri, Sep 20, 2019 at 2:59 AM Bob <k4cy@...> wrote:

When turning off WSJT/JTDX Logger32 assumes control of the radio. Logger32 then puts the radio back on the frequency/mode/split it was on when Logger32 last had control. 73.

On September 20, 2019 at 5:52 AM G4RRM Pete <pete@...> wrote:

Hi All

 

This is probably simple but its stumped me! (I’m simple)

When I run L32 and FT8 and come to close down, when I shut the UDP Bandmap the radio VFO will switch bands from what I was on to one previously used.

 

I’m sure it must be a setting in one of the pieces of software but I cant see it, can anyone point me in the right direction to stop this?

 

73

Pete

G4RRM

 


 


 



--
Sincerely,
Alexey Antipov, NW7M
+1(872)222-7373

Re: FT8 UDP

G4RRM Pete
 

Ahhh understood

 

Thanks Bob

 

73

Pete

G4RRM

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Bob
Sent: 20 September 2019 11:00
To: hamlogger@groups.io
Subject: Re: [hamlogger] FT8 UDP

 

When turning off WSJT/JTDX Logger32 assumes control of the radio. Logger32 then puts the radio back on the frequency/mode/split it was on when Logger32 last had control. 73.

On September 20, 2019 at 5:52 AM G4RRM Pete <pete@...> wrote:

Hi All

 

This is probably simple but its stumped me! (I’m simple)

When I run L32 and FT8 and come to close down, when I shut the UDP Bandmap the radio VFO will switch bands from what I was on to one previously used.

 

I’m sure it must be a setting in one of the pieces of software but I cant see it, can anyone point me in the right direction to stop this?

 

73

Pete

G4RRM

 


 


 

Re: FT8 UDP

Bob <k4cy@...>
 

When turning off WSJT/JTDX Logger32 assumes control of the radio. Logger32 then puts the radio back on the frequency/mode/split it was on when Logger32 last had control. 73.

On September 20, 2019 at 5:52 AM G4RRM Pete <pete@...> wrote:

Hi All

 

This is probably simple but its stumped me! (I’m simple)

When I run L32 and FT8 and come to close down, when I shut the UDP Bandmap the radio VFO will switch bands from what I was on to one previously used.

 

I’m sure it must be a setting in one of the pieces of software but I cant see it, can anyone point me in the right direction to stop this?

 

73

Pete

G4RRM

 


 


 

FT8 UDP

G4RRM Pete
 

Hi All

 

This is probably simple but its stumped me! (I’m simple)

When I run L32 and FT8 and come to close down, when I shut the UDP Bandmap the radio VFO will switch bands from what I was on to one previously used.

 

I’m sure it must be a setting in one of the pieces of software but I cant see it, can anyone point me in the right direction to stop this?

 

73

Pete

G4RRM