Date   

Re: cherry picking

Bob
 

No mystery. You must have these two menu options checked. SeventyThree(s).


On January 8, 2020 at 9:59 AM Matthias Bellmann <Dk4wd@...> wrote:

WSJT - settings -reporting:

udp server 127.0.0.1
Port number 2237
accept udp requests, notify on accepted and accepted udp restores window all three marked.

FA session b4 only accept udp requests has been marked.
Both above mentioned had the same effect, Dupe calls are logged.

all qso's are logged correctly. I can make calls by clicking on a call shown in the band map. Suppose UDP is running correctly.
Hidden mystery ? :-)
73

Am 08.01.2020 um 15:34 schrieb Bob:
Are you logging FT4/FT8 QSOs in real time by UDP messages? If not, there is no way for Logger32 to know if a station has been worked before. SeventyThree(s).
On January 8, 2020 at 7:47 AM Matthias Bellmann <Dk4wd@...> wrote:

Sorry, I marked the wax you proposed, but nevertheless dupes occur. There must be something else?


Am 08.01.2020 um 09:57 schrieb ja1nlx:

It does not call worked B4 this Band/Mode and does not display them in UDP BandMap

with this configuration.


73



On 2020/01/08 17:45, Matthias Bellmann wrote:
When using cherry picking in bandmap i always contact stations already
qso-ed b4, even when  it happend just few minutes ago.

I clicked in menue config-show/block callsigns worked before any
possible combination, but dupes still happen.

In menue config-cherry picking options i dont find a applicable option.

Another fault of mine?





--
73 de aki
JA1NLX


 


 


Re: cherry picking

Matthias Bellmann
 

WSJT - settings -reporting:

udp server 127.0.0.1
Port number 2237
accept udp requests, notify on accepted and accepted udp restores window all three marked.

FA session b4 only accept udp requests has been marked.
Both above mentioned had the same effect, Dupe calls are logged.

all qso's are logged correctly. I can make calls by clicking on a call shown in the band map. Suppose UDP is running correctly.
Hidden mystery ? :-)
73

Am 08.01.2020 um 15:34 schrieb Bob:

Are you logging FT4/FT8 QSOs in real time by UDP messages? If not, there is no way for Logger32 to know if a station has been worked before. SeventyThree(s).
On January 8, 2020 at 7:47 AM Matthias Bellmann <Dk4wd@...> wrote:

Sorry, I marked the wax you proposed, but nevertheless dupes occur. There must be something else?


Am 08.01.2020 um 09:57 schrieb ja1nlx:

It does not call worked B4 this Band/Mode and does not display them in UDP BandMap

with this configuration.


73



On 2020/01/08 17:45, Matthias Bellmann wrote:
When using cherry picking in bandmap i always contact stations already
qso-ed b4, even when  it happend just few minutes ago.

I clicked in menue config-show/block callsigns worked before any
possible combination, but dupes still happen.

In menue config-cherry picking options i dont find a applicable option.

Another fault of mine?





--
73 de aki
JA1NLX


 


Re: cherry picking

Bob
 

Are you logging FT4/FT8 QSOs in real time by UDP messages? If not, there is no way for Logger32 to know if a station has been worked before. SeventyThree(s).

On January 8, 2020 at 7:47 AM Matthias Bellmann <Dk4wd@...> wrote:

Sorry, I marked the wax you proposed, but nevertheless dupes occur. There must be something else?


Am 08.01.2020 um 09:57 schrieb ja1nlx:

It does not call worked B4 this Band/Mode and does not display them in UDP BandMap

with this configuration.


73



On 2020/01/08 17:45, Matthias Bellmann wrote:
When using cherry picking in bandmap i always contact stations already
qso-ed b4, even when  it happend just few minutes ago.

I clicked in menue config-show/block callsigns worked before any
possible combination, but dupes still happen.

In menue config-cherry picking options i dont find a applicable option.

Another fault of mine?





--
73 de aki
JA1NLX


 


Re: cherry picking

Matthias Bellmann
 

I checked it, yes the call ist with a X


Am 08.01.2020 um 14:13 schrieb ja1nlx:

If "Block selected callsign QSOd B4" is unchecked then QSOd B4 callsign are displayed

with "X" in UDP BandMap.  Do you see this ?

Does cherry-picking call these callsign with "X" ?

73

On 2020/01/08 21:47, Matthias Bellmann wrote:

Sorry, I marked the wax you proposed, but nevertheless dupes occur. There must be something else?


Am 08.01.2020 um 09:57 schrieb ja1nlx:

It does not call worked B4 this Band/Mode and does not display them in UDP BandMap

with this configuration.


73



On 2020/01/08 17:45, Matthias Bellmann wrote:
When using cherry picking in bandmap i always contact stations already
qso-ed b4, even when  it happend just few minutes ago.

I clicked in menue config-show/block callsigns worked before any
possible combination, but dupes still happen.

In menue config-cherry picking options i dont find a applicable option.

Another fault of mine?





--
73 de aki
JA1NLX

--
73 de aki
JA1NLX


Re: cherry picking

Matthias Bellmann
 

I am going to check it, but it takes some time. Thanks


Am 08.01.2020 um 14:13 schrieb ja1nlx:

If "Block selected callsign QSOd B4" is unchecked then QSOd B4 callsign are displayed

with "X" in UDP BandMap.  Do you see this ?

Does cherry-picking call these callsign with "X" ?

73

On 2020/01/08 21:47, Matthias Bellmann wrote:

Sorry, I marked the wax you proposed, but nevertheless dupes occur. There must be something else?


Am 08.01.2020 um 09:57 schrieb ja1nlx:

It does not call worked B4 this Band/Mode and does not display them in UDP BandMap

with this configuration.


73



On 2020/01/08 17:45, Matthias Bellmann wrote:
When using cherry picking in bandmap i always contact stations already
qso-ed b4, even when  it happend just few minutes ago.

I clicked in menue config-show/block callsigns worked before any
possible combination, but dupes still happen.

In menue config-cherry picking options i dont find a applicable option.

Another fault of mine?





--
73 de aki
JA1NLX

--
73 de aki
JA1NLX


Re: cherry picking

ja1nlx
 

If "Block selected callsign QSOd B4" is unchecked then QSOd B4 callsign are displayed

with "X" in UDP BandMap.  Do you see this ?

Does cherry-picking call these callsign with "X" ?

73

On 2020/01/08 21:47, Matthias Bellmann wrote:

Sorry, I marked the wax you proposed, but nevertheless dupes occur. There must be something else?


Am 08.01.2020 um 09:57 schrieb ja1nlx:

It does not call worked B4 this Band/Mode and does not display them in UDP BandMap

with this configuration.


73



On 2020/01/08 17:45, Matthias Bellmann wrote:
When using cherry picking in bandmap i always contact stations already
qso-ed b4, even when  it happend just few minutes ago.

I clicked in menue config-show/block callsigns worked before any
possible combination, but dupes still happen.

In menue config-cherry picking options i dont find a applicable option.

Another fault of mine?





--
73 de aki
JA1NLX

--
73 de aki
JA1NLX


Re: cherry picking

Matthias Bellmann
 

Sorry, I marked the wax you proposed, but nevertheless dupes occur. There must be something else?


Am 08.01.2020 um 09:57 schrieb ja1nlx:

It does not call worked B4 this Band/Mode and does not display them in UDP BandMap

with this configuration.


73



On 2020/01/08 17:45, Matthias Bellmann wrote:
When using cherry picking in bandmap i always contact stations already
qso-ed b4, even when  it happend just few minutes ago.

I clicked in menue config-show/block callsigns worked before any
possible combination, but dupes still happen.

In menue config-cherry picking options i dont find a applicable option.

Another fault of mine?





--
73 de aki
JA1NLX


Re: cherry picking

ja1nlx
 

It does not call worked B4 this Band/Mode and does not display them in UDP BandMap

with this configuration.


73



On 2020/01/08 17:45, Matthias Bellmann wrote:
When using cherry picking in bandmap i always contact stations already
qso-ed b4, even when  it happend just few minutes ago.

I clicked in menue config-show/block callsigns worked before any
possible combination, but dupes still happen.

In menue config-cherry picking options i dont find a applicable option.

Another fault of mine?





--
73 de aki
JA1NLX


cherry picking

Matthias Bellmann
 

When using cherry picking in bandmap i always contact stations already
qso-ed b4, even when  it happend just few minutes ago.

I clicked in menue config-show/block callsigns worked before any
possible combination, but dupes still happen.

In menue config-cherry picking options i dont find a applicable option.

Another fault of mine?


Re: Previous QSO

Gianfranco
 

The new Logger32.exe works correctly !!!
Great job Bob, thank you very much.

73 de ik3ogn GFranco


Il 07/01/2020 16:47, Bob ha scritto:
Yes, I can duplicate this test. I have broken something and importing ADIF records is not automatically updating the statistics. QRX while I investigate. SeventyThree(s).
On January 7, 2020 at 8:14 AM "Gianfranco via Groups.Io" <tog-franco@...> wrote:

OK Bob you are right and this also happens here.

Now I export 2 existing QSOs with the date 06 Jan, change the date of both in Jan 05 and again in Jan 07....Import the 4 new QSOs ...

In the Previous QSOs  window I only see the original 2 QSOs with the date Jan 06 and not the newones imported.
I hope to be clear.

ik3ogn GFranco


Il 07/01/2020 11:41, Bob ha scritto:
I can not duplicate this. I made a dummy QSO with IK3OGN. I see one IK3OGN QSO in the Logbook Page Window. I made a dummy ADIF file and imported a QSO with IK3OGN. I now see two IK3OGN QSOs in the Previous QSOs Window. I made another dummy QSO with IK3OGN. I now see three IK3OGN QSOs in the Previous QSOs Window. SeventyThree(s).
On January 7, 2020 at 1:21 AM "Gianfranco via Groups.Io" <tog-franco@...> wrote:

I apologize but I want to specify that only the imported QSOs do not appear in the "Previous QSOs" window.
They are shown regularly only
after the statistical recalculation.
For normal QSOs logged in via "DX Spot" everything is ok

ik3ogn GFranco

Il 07/01/2020 06:36, Gianfranco via Groups.Io ha scritto:


I have a problem with displaying previous QSO’s.

The "Previous QSOs" window shows only the qso logged before the update to the latest version 404.

ik3ogn GFranco


 

 


Re: manual calling from bandmap

Bob
 

Hopefully read the help files. 73.

On January 7, 2020 at 11:35 AM Matthias Bellmann <Dk4wd@web.de> wrote:


Bob: Oh my God! What would i do without your help! Thanks

73 Matthias


Am 07.01.2020 um 17:14 schrieb Bob:
You must configure WSJT-X to allow it to receive UDP Reply messages. Then WSJT-X will accept commands from Logger32 and call the station. SeventyThree(s).

On January 7, 2020 at 10:25 AM Matthias Bellmann <Dk4wd@web.de> wrote:


NEED HELP:

wsjt-bandmap ist running and shows any active call.

I (right) click on a wanted call, the call  is surrounded by a red box

According to the help-file my ft8 should send a message after the wanted
call ha finished the qso (73, RRR) or has called CQ. So i exspect.

BUT: The wanted statiion terminates its qso, the red box disappears, but
nmothing happend with my wsjtx.

There must be a step i have missed out or misunderstodd.

What must i do?









Re: manual calling from bandmap

Matthias Bellmann
 

Bob: Oh my God! What would i do without your help! Thanks

73 Matthias


Am 07.01.2020 um 17:14 schrieb Bob:

You must configure WSJT-X to allow it to receive UDP Reply messages. Then WSJT-X will accept commands from Logger32 and call the station. SeventyThree(s).

On January 7, 2020 at 10:25 AM Matthias Bellmann <Dk4wd@web.de> wrote:


NEED HELP:

wsjt-bandmap ist running and shows any active call.

I (right) click on a wanted call, the call  is surrounded by a red box

According to the help-file my ft8 should send a message after the wanted
call ha finished the qso (73, RRR) or has called CQ. So i exspect.

BUT: The wanted statiion terminates its qso, the red box disappears, but
nmothing happend with my wsjtx.

There must be a step i have missed out or misunderstodd.

What must i do?







Re: manual calling from bandmap

Bob
 

You must configure WSJT-X to allow it to receive UDP Reply messages. Then WSJT-X will accept commands from Logger32 and call the station. SeventyThree(s).

On January 7, 2020 at 10:25 AM Matthias Bellmann <Dk4wd@web.de> wrote:


NEED HELP:

wsjt-bandmap ist running and shows any active call.

I (right) click on a wanted call, the call  is surrounded by a red box

According to the help-file my ft8 should send a message after the wanted
call ha finished the qso (73, RRR) or has called CQ. So i exspect.

BUT: The wanted statiion terminates its qso, the red box disappears, but
nmothing happend with my wsjtx.

There must be a step i have missed out or misunderstodd.

What must i do?







Re: LOTW Sent flag

Bob
 

On completion of the Export LoTW file process you are prompted with message box something like this:



Click YES and QSOs are marked a SENT and the SEND fied is removed. SeventyThre(s).

On January 7, 2020 at 8:57 AM Marvin Stern <marbern@...> wrote:

Thanks for the prompt reply Bob. I used the Export LOTW file routine, LOTW accepts it, but Logger does not flag the QSO as sent. I'll try the N2AMG routine next.
73's, Marv W2AOC 

 


Re: Previous QSO

Bob
 

Yes, I can duplicate this test. I have broken something and importing ADIF records is not automatically updating the statistics. QRX while I investigate. SeventyThree(s).

On January 7, 2020 at 8:14 AM "Gianfranco via Groups.Io" <tog-franco@...> wrote:

OK Bob you are right and this also happens here.

Now I export 2 existing QSOs with the date 06 Jan, change the date of both in Jan 05 and again in Jan 07....Import the 4 new QSOs ...

In the Previous QSOs  window I only see the original 2 QSOs with the date Jan 06 and not the newones imported.
I hope to be clear.

ik3ogn GFranco


Il 07/01/2020 11:41, Bob ha scritto:
I can not duplicate this. I made a dummy QSO with IK3OGN. I see one IK3OGN QSO in the Logbook Page Window. I made a dummy ADIF file and imported a QSO with IK3OGN. I now see two IK3OGN QSOs in the Previous QSOs Window. I made another dummy QSO with IK3OGN. I now see three IK3OGN QSOs in the Previous QSOs Window. SeventyThree(s).
On January 7, 2020 at 1:21 AM "Gianfranco via Groups.Io" <tog-franco@...> wrote:

I apologize but I want to specify that only the imported QSOs do not appear in the "Previous QSOs" window.
They are shown regularly only
after the statistical recalculation.
For normal QSOs logged in via "DX Spot" everything is ok

ik3ogn GFranco

Il 07/01/2020 06:36, Gianfranco via Groups.Io ha scritto:


I have a problem with displaying previous QSO’s.

The "Previous QSOs" window shows only the qso logged before the update to the latest version 404.

ik3ogn GFranco


 

 


manual calling from bandmap

Matthias Bellmann
 

NEED HELP:

wsjt-bandmap ist running and shows any active call.

I (right) click on a wanted call, the call  is surrounded by a red box

According to the help-file my ft8 should send a message after the wanted
call ha finished the qso (73, RRR) or has called CQ. So i exspect.

BUT: The wanted statiion terminates its qso, the red box disappears, but
nmothing happend with my wsjtx.

There must be a step i have missed out or misunderstodd.

What must i do?


Re: LOTW Sent flag

Marvin Stern <marbern@...>
 

Thanks for the prompt reply Bob. I used the Export LOTW file routine, LOTW accepts it, but Logger does not flag the QSO as sent. I'll try the N2AMG routine next.
73's, Marv W2AOC 


Re: LOTW Sent flag

Marvin Stern <marbern@...>
 

Tnx for the reply Arturo. 73 Marv


Re: Previous QSO

Gianfranco
 

... I run "Recalculate statistic" and all 6 QSOs (3 and 3) are visible.

ik3ogn GFranco


Il 07/01/2020 14:14, Gianfranco via Groups.Io ha scritto:

OK Bob you are right and this also happens here.

Now I export 2 existing QSOs with the date 06 Jan, change the date of both in Jan 05 and again in Jan 07....Import the 4 new QSOs ...

In the Previous QSOs  window I only see the original 2 QSOs with the date Jan 06 and not the newones imported.
I hope to be clear.

ik3ogn GFranco


Il 07/01/2020 11:41, Bob ha scritto:
I can not duplicate this. I made a dummy QSO with IK3OGN. I see one IK3OGN QSO in the Logbook Page Window. I made a dummy ADIF file and imported a QSO with IK3OGN. I now see two IK3OGN QSOs in the Previous QSOs Window. I made another dummy QSO with IK3OGN. I now see three IK3OGN QSOs in the Previous QSOs Window. SeventyThree(s).
On January 7, 2020 at 1:21 AM "Gianfranco via Groups.Io" <tog-franco@...> wrote:

I apologize but I want to specify that only the imported QSOs do not appear in the "Previous QSOs" window.
They are shown regularly only
after the statistical recalculation.
For normal QSOs logged in via "DX Spot" everything is ok

ik3ogn GFranco

Il 07/01/2020 06:36, Gianfranco via Groups.Io ha scritto:


I have a problem with displaying previous QSO’s.

The "Previous QSOs" window shows only the qso logged before the update to the latest version 404.

ik3ogn GFranco


 


Re: Previous QSO

Gianfranco
 

OK Bob you are right and this also happens here.

Now I export 2 existing QSOs with the date 06 Jan, change the date of both in Jan 05 and again in Jan 07....Import the 4 new QSOs ...

In the Previous QSOs  window I only see the original 2 QSOs with the date Jan 06 and not the newones imported.
I hope to be clear.

ik3ogn GFranco


Il 07/01/2020 11:41, Bob ha scritto:
I can not duplicate this. I made a dummy QSO with IK3OGN. I see one IK3OGN QSO in the Logbook Page Window. I made a dummy ADIF file and imported a QSO with IK3OGN. I now see two IK3OGN QSOs in the Previous QSOs Window. I made another dummy QSO with IK3OGN. I now see three IK3OGN QSOs in the Previous QSOs Window. SeventyThree(s).
On January 7, 2020 at 1:21 AM "Gianfranco via Groups.Io" <tog-franco@...> wrote:

I apologize but I want to specify that only the imported QSOs do not appear in the "Previous QSOs" window.
They are shown regularly only
after the statistical recalculation.
For normal QSOs logged in via "DX Spot" everything is ok

ik3ogn GFranco

Il 07/01/2020 06:36, Gianfranco via Groups.Io ha scritto:


I have a problem with displaying previous QSO’s.

The "Previous QSOs" window shows only the qso logged before the update to the latest version 404.

ik3ogn GFranco


 

6161 - 6180 of 84644