1. hamlogger@groups.io
   Date   
Re: l32 country update error

C Romocea
 

tnx Jim i'll do that and try again. 
Re: l32 country update error

Jim Hargrave
 

I would suggest  you update Logger32 to version 3.50.414 (Current).

Also, the update is no longer supported using OS XP and prior.

 

Jim – w5ifp-

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of C Romocea
Sent: Saturday, May 9, 2020 3:30 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] l32 country update error

 

I run 3.50.398. tried several times, same outcome?!

Re: Logger32 US callsign/states update?

Jim Altman
 

Its probably using a generic central location for the call area.  You have to lookup the callsign on a callsign lookup tool to get the exact state.  Every ‘5’ call is in Dallas, Texas until you look it up.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of C Romocea
Sent: Saturday, May 9, 2020 3:56 PM
To: hamlogger@groups.io
Subject: [hamlogger] Logger32 US callsign/states update?

 

Hi, I’m chasing WAS (worked all states) and Logger32 indicates the wrong US states for the callsigns that appear on the cluster. Where is the callsign information accessed from and can it be updated?

Re: l32 country update error

C Romocea
 

I run 3.50.398. tried several times, same outcome?!
Re: l32 country update error

Jim Hargrave
 

I ran   the update all the way.  Please try again.

What version Logger32 are you using?

 

 

Jim – w5ifp-

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of C Romocea
Sent: Saturday, May 9, 2020 2:59 PM
To: hamlogger@groups.io
Subject: [hamlogger] l32 country update error

 

Hi,

can anyone help me understand why it won't decompress the file?

Thanks
l32 country update error

C Romocea
 

Hi,

can anyone help me understand why it won't decompress the file?

Thanks
Logger32 US callsign/states update?

C Romocea
 

Hi, I’m chasing WAS (worked all states) and Logger32 indicates the wrong US states for the callsigns that appear on the cluster. Where is the callsign information accessed from and can it be updated?
Re: L32logsync doesn't update

Joseph LaFerla
 

OK thanks. I'll do that later today.

Joe
Re: L32logsync doesn't update

Rick Ellison
 

Joe..

You shouldn’t.. The .ini file should be left untouched when upgreading…

 

73 Rick N2AMG

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Joseph LaFerla
Sent: Friday, May 8, 2020 7:46 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] L32logsync doesn't update

 

OK Rick, thanks.  I will do that.  Will I overwrite all my customizations when I manually update?

Joe VA3JLF



Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com


Re: L32logsync doesn't update

Joseph LaFerla
 

OK Rick, thanks.  I will do that.  Will I overwrite all my customizations when I manually update?

Joe VA3JLF
ODP: [hamlogger] XMMT.OCX not correctly registered

Andy VA3PL
 

Thanks Mike...so here we go...no more W10

Andy

Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika Mike <ch25@...>
Wysłane: czwartek, 7 maja 2020 22:10
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: [hamlogger] XMMT.OCX not correctly registered
 
On Thu, May 7, 2020 at 07:18 PM, Andy VA3PL wrote:
Error 339 (Component 'XMMT.OCX' or one of its dependencies not correctly registered: File is missing or invalid)
in procedure Toolbar1_MouseUp or form MDIForm.
 
XMMT.OCX is in Logger
 
How to solve this....help
Easy way: get rid of windows10 crapware and go back to 7.
Harder way: register manually.
Hard way: learn why and how win10 blocked registration of that file and force OS to do what is was asked. Could be impossible :)
Mike

ODP: [hamlogger] XMMT.OCX not correctly registered

Andy VA3PL
 

Thanks Gary for suggestions.
I am not at that computer yet but I think I forgot to run Logger as administrator so as Bob suggests I will do it a bit later on today.
Thanks
Andy SP9KR

Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika Gary Hinson <Gary@...>
Wysłane: czwartek, 7 maja 2020 22:47
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: [hamlogger] XMMT.OCX not correctly registered
 

The Logger32 installer generally handles this just fine, so an easy option should be to deinstall then reinstall Logger32 and let it update itself, AFTER having first made a safety backup of your log (e.g. copy the entire Logger32 directory to a USB stick, then take it out of the drive and stash it somewhere safe) just in case things go horribly wrong. 

 

Also there’s always the Universal Solution: reboot and hope for the best.  Roughly half of all mysterious PC/Windows/network problems are solved by a simple reboot … which is why solid state system disks are so popular I guess.

 

73 GL

Gary  ZL2iFB@home

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Mike
Sent: 08 May 2020 08:10
To: hamlogger@groups.io
Subject: Re: [hamlogger] XMMT.OCX not correctly registered

 

On Thu, May 7, 2020 at 07:18 PM, Andy VA3PL wrote:

Error 339 (Component 'XMMT.OCX' or one of its dependencies not correctly registered: File is missing or invalid)

in procedure Toolbar1_MouseUp or form MDIForm.

 

XMMT.OCX is in Logger

 

How to solve this....help

Easy way: get rid of windows10 crapware and go back to 7.
Harder way: register manually.
Hard way: learn why and how win10 blocked registration of that file and force OS to do what is was asked. Could be impossible :)
Mike

ODP: [hamlogger] XMMT.OCX not correctly registered

Andy VA3PL
 

Thanks Bob
I knew I can count on you.
Yes...live is good

73 Andy SP9KR

Od: hamlogger@groups.io <hamlogger@groups.io> w imieniu użytkownika n5kd <n5kd@...>
Wysłane: piątek, 8 maja 2020 04:58
Do: hamlogger@groups.io <hamlogger@groups.io>
Temat: Re: [hamlogger] XMMT.OCX not correctly registered
 
Diving ???

You obviously left Weston-super-Mud.

That’s a comment for Bob.

73’ Pete, N5KD. 

Sent from my mobile

On May 7, 2020, at 16:19, Bob <k4cy@...> wrote:

A new installation on a new PC? Did you forget to run Logger32 as an Administrator? Did you adjust the PCs UAC to a more sane level? Di you install anti-virus software on the PC (they often come with bundles of bloatware). Have they been tamed? The XMMT.OCX is needed for MMTTY. It is a self registering OCX an it is in the \Logger32 directory. Most likely you PC setup somewhere is preventing the OCX from registering. SeventyThree(s)

PS. Gorgeous day here. Sunrise in about 45 minutes. Air is calm and the sea smooth. Life is good. No masks, no safe-at-home, no 33M jobless claims, no economic meltdown. Just living life the way it was meant to be. Sun, sea, fishing, diving, and excellent company.
On May 7, 2020 at 1:18 PM Andy VA3PL <va3pl@...> wrote:

I think I screwed up and I need help.
This is new installation on new Windows 10 machine.

I have got this:

Error 339 (Component 'XMMT.OCX' or one of its dependencies not correctly registered: File is missing or invalid)
in procedure Toolbar1_MouseUp or form MDIForm.

XMMT.OCX is in Logger

How to solve this....help

Andy SP9KR
Retirement is the best job I've ever had

 

Re: XMMT.OCX not correctly registered

n5kd
 

Diving ???

You obviously left Weston-super-Mud.

That’s a comment for Bob.

73’ Pete, N5KD. 

Sent from my mobile

On May 7, 2020, at 16:19, Bob <k4cy@...> wrote:

A new installation on a new PC? Did you forget to run Logger32 as an Administrator? Did you adjust the PCs UAC to a more sane level? Di you install anti-virus software on the PC (they often come with bundles of bloatware). Have they been tamed? The XMMT.OCX is needed for MMTTY. It is a self registering OCX an it is in the \Logger32 directory. Most likely you PC setup somewhere is preventing the OCX from registering. SeventyThree(s)

PS. Gorgeous day here. Sunrise in about 45 minutes. Air is calm and the sea smooth. Life is good. No masks, no safe-at-home, no 33M jobless claims, no economic meltdown. Just living life the way it was meant to be. Sun, sea, fishing, diving, and excellent company.
On May 7, 2020 at 1:18 PM Andy VA3PL <va3pl@...> wrote:

I think I screwed up and I need help.
This is new installation on new Windows 10 machine.

I have got this:

Error 339 (Component 'XMMT.OCX' or one of its dependencies not correctly registered: File is missing or invalid)
in procedure Toolbar1_MouseUp or form MDIForm.

XMMT.OCX is in Logger

How to solve this....help

Andy SP9KR
Retirement is the best job I've ever had

 

Re: XMMT.OCX not correctly registered

Jim Cox
 

Amen, been using W10 since converted from W7.  Jim K4JAF
 

From: Ken McVie
Sent: Thursday, May 7, 2020 5:28 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] XMMT.OCX not correctly registered
 
This is BS, 100's or maybe 1000's of W10 users are happily using W10 & L32!

73
Ken ZL4NR

On 8/05/2020 8:10 am, Mike wrote:
On Thu, May 7, 2020 at 07:18 PM, Andy VA3PL wrote:
Error 339 (Component 'XMMT.OCX' or one of its dependencies not correctly registered: File is missing or invalid)
in procedure Toolbar1_MouseUp or form MDIForm.
 
XMMT.OCX is in Logger
 
How to solve this....help
Easy way: get rid of windows10 crapware and go back to 7.
Harder way: register manually.
Hard way: learn why and how win10 blocked registration of that file and force OS to do what is was asked. Could be impossible :)
Mike

Re: Please is there a way of stopping the automatic updates of Logger?

Anthony Roskilly
 

Many thanks Rick
 
I no longer worry about DXCC totals or countries, counties worked just use Logger as my day to day contact log.
 
Take care, keep safe
 
73 Tony G3ZRJ   G4FOC during May

 
 
Sent: Thursday, May 07, 2020 at 11:49 PM
From: "Rick Ellison" <rellison@...>
To: hamlogger@groups.io
Subject: Re: [hamlogger] Please is there a way of stopping the automatic updates of Logger?

Hi Tony..

Yes that is possible but why would you want to do that. When Logger32 shows there is an update you should let the program update as the updates contain Bug fixes and other changes that keep the program running the best as possible.

If you really want to disable them Click on the top menu Setup then on the Updates menu. Click on the top line and unselect Enable Updates..

 

73 Rick N2AMG

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Anthony Roskilly
Sent: Thursday, May 7, 2020 6:34 PM
To: hamlogger@groups.io
Subject: [hamlogger] Please is there a way of stopping the automatic updates of Logger?

 

Hi,

am running older version of Logger 32   ver 3.5,  I don't need anything more but would Love to turn off the automated updates as is a pain when trying to type in station call in response to a CQ.   Any help much appreciate

 

 

73  Tony G3ZRJ    g3zrj.morsekey@...

 

 
Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com

Re: Please is there a way of stopping the automatic updates of Logger?

ja1nlx
 

Tony

You may not expect any help/suggestion unless you are running the latest version.

All most all users are running the latest version.

I do not know there is an option in ver3.5, however click Setup, Update, Logger32 version update and uncheck

Enable auto update.

73


On 2020/05/08 7:34, Anthony Roskilly wrote:
Hi,
am running older version of Logger 32   ver 3.5,  I don't need anything more but would Love to turn off the automated updates as is a pain when trying to type in station call in response to a CQ.   Any help much appreciate
 
 
73  Tony G3ZRJ    g3zrj.morsekey@...
--
73 de aki
JA1NLX
Re: Please is there a way of stopping the automatic updates of Logger?

Rick Ellison
 

Hi Tony..

Yes that is possible but why would you want to do that. When Logger32 shows there is an update you should let the program update as the updates contain Bug fixes and other changes that keep the program running the best as possible.

If you really want to disable them Click on the top menu Setup then on the Updates menu. Click on the top line and unselect Enable Updates..

 

73 Rick N2AMG

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Anthony Roskilly
Sent: Thursday, May 7, 2020 6:34 PM
To: hamlogger@groups.io
Subject: [hamlogger] Please is there a way of stopping the automatic updates of Logger?

 

Hi,

am running older version of Logger 32   ver 3.5,  I don't need anything more but would Love to turn off the automated updates as is a pain when trying to type in station call in response to a CQ.   Any help much appreciate

 

 

73  Tony G3ZRJ    g3zrj.morsekey@...



Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com


Please is there a way of stopping the automatic updates of Logger?

Anthony Roskilly
 

Hi,
am running older version of Logger 32   ver 3.5,  I don't need anything more but would Love to turn off the automated updates as is a pain when trying to type in station call in response to a CQ.   Any help much appreciate
 
 
73  Tony G3ZRJ    g3zrj.morsekey@...
Re: XMMT.OCX not correctly registered

Ken McVie <kenmc@...>
 

This is BS, 100's or maybe 1000's of W10 users are happily using W10 & L32!

73
Ken ZL4NR

On 8/05/2020 8:10 am, Mike wrote:
On Thu, May 7, 2020 at 07:18 PM, Andy VA3PL wrote:
Error 339 (Component 'XMMT.OCX' or one of its dependencies not correctly registered: File is missing or invalid)
in procedure Toolbar1_MouseUp or form MDIForm.
 
XMMT.OCX is in Logger
 
How to solve this....help
Easy way: get rid of windows10 crapware and go back to 7.
Harder way: register manually.
Hard way: learn why and how win10 blocked registration of that file and force OS to do what is was asked. Could be impossible :)
Mike

3021 - 3040 of 82997