Date   

Re: Problem with ft8 blocking filters

Mike
 

How to disable highlight for unknown band/mode than?
I played with highlight colours. I set red for "new gridsquare this mode" and enabled it. UDP window starts filling with callsigns without highlight. When I disable "new gridsquare this mode"it disappear.
MIke


Re: Logger32 and CWGet

ja1nlx
 

Orrin

Thanks.  I will send you draft off line.

73

On 2020/01/26 21:00, ORRIN wrote:

Be glad to help!

 

Sent from Mail for Windows 10

 

From: ja1nlx
Sent: Sunday, January 26, 2020 6:35 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

Orrin

I am making a little changes in CW Machine/CwGet section in Logger32 Help.

I will send you draft document for you. Please check/edit/add if you like.

OK ?

73

On 2020/01/26 20:23, ORRIN wrote:

OK, I made some snips this morning to document the setup for CWGet/Logger32.  So if you would like I can pass these along for anyone else’s use or for the “Logger32 Help Docs” if desireable—just let me know. 

 

Thanks again for the help with the setup and the quick response with the new .exe

 

73, Orrin/WO4D

 

Sent from Mail for Windows 10

 

From: Rick Ellison
Sent: Saturday, January 25, 2020 9:58 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

I think we updated the workings with CWGet in N1MM when we updated to .net but everything continues to work.

 

73 Rick

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Bob
Sent: Saturday, January 25, 2020 7:44 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

It appears the CwGet have made some unexpected/unannounced changes since the original interface was written. I have made code changes to match, and sent you a recompiled Logger32.exe to test. When you get an eMail from pCloud, download the file over the existing Logger32.exe in your \Logger32 directory. An operational note: If you run Logger32 as an Administrator, run CwGet as an Administrator. SeventyThree(s).

On January 24, 2020 at 7:02 PM ORRIN <wo4d@...> wrote:

Have a fully operational Logger 32 and Newly registered CWGet. 

 

Both are working independent of each other, been trying to get the decode to show up in the Data Terminal CW window.  Is this suppose to work this way?

 

Did get CWget to decode signals and then highlighted the decoded callsign and with a right click was able select “Call” but it would not populate the Logger32 logging window.

 

Anyone got a little help in this area

 

Sent from Mail for Windows 10

 


 

 

--
73 de aki
JA1NLX

 

--
73 de aki
JA1NLX


Re: Logger32 and CWGet

ORRIN <wo4d@...>
 

Be glad to help!

 

Sent from Mail for Windows 10

 

From: ja1nlx
Sent: Sunday, January 26, 2020 6:35 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

Orrin

I am making a little changes in CW Machine/CwGet section in Logger32 Help.

I will send you draft document for you. Please check/edit/add if you like.

OK ?

73

On 2020/01/26 20:23, ORRIN wrote:

OK, I made some snips this morning to document the setup for CWGet/Logger32.  So if you would like I can pass these along for anyone else’s use or for the “Logger32 Help Docs” if desireable—just let me know. 

 

Thanks again for the help with the setup and the quick response with the new .exe

 

73, Orrin/WO4D

 

Sent from Mail for Windows 10

 

From: Rick Ellison
Sent: Saturday, January 25, 2020 9:58 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

I think we updated the workings with CWGet in N1MM when we updated to .net but everything continues to work.

 

73 Rick

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Bob
Sent: Saturday, January 25, 2020 7:44 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

It appears the CwGet have made some unexpected/unannounced changes since the original interface was written. I have made code changes to match, and sent you a recompiled Logger32.exe to test. When you get an eMail from pCloud, download the file over the existing Logger32.exe in your \Logger32 directory. An operational note: If you run Logger32 as an Administrator, run CwGet as an Administrator. SeventyThree(s).

On January 24, 2020 at 7:02 PM ORRIN <wo4d@...> wrote:

Have a fully operational Logger 32 and Newly registered CWGet. 

 

Both are working independent of each other, been trying to get the decode to show up in the Data Terminal CW window.  Is this suppose to work this way?

 

Did get CWget to decode signals and then highlighted the decoded callsign and with a right click was able select “Call” but it would not populate the Logger32 logging window.

 

Anyone got a little help in this area

 

Sent from Mail for Windows 10

 


 

 

--
73 de aki
JA1NLX

 


Re: Logger32 and CWGet

ja1nlx
 

Orrin

I am making a little changes in CW Machine/CwGet section in Logger32 Help.

I will send you draft document for you. Please check/edit/add if you like.

OK ?

73

On 2020/01/26 20:23, ORRIN wrote:

OK, I made some snips this morning to document the setup for CWGet/Logger32.  So if you would like I can pass these along for anyone else’s use or for the “Logger32 Help Docs” if desireable—just let me know. 

 

Thanks again for the help with the setup and the quick response with the new .exe

 

73, Orrin/WO4D

 

Sent from Mail for Windows 10

 

From: Rick Ellison
Sent: Saturday, January 25, 2020 9:58 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

I think we updated the workings with CWGet in N1MM when we updated to .net but everything continues to work.

 

73 Rick

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Bob
Sent: Saturday, January 25, 2020 7:44 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

It appears the CwGet have made some unexpected/unannounced changes since the original interface was written. I have made code changes to match, and sent you a recompiled Logger32.exe to test. When you get an eMail from pCloud, download the file over the existing Logger32.exe in your \Logger32 directory. An operational note: If you run Logger32 as an Administrator, run CwGet as an Administrator. SeventyThree(s).

On January 24, 2020 at 7:02 PM ORRIN <wo4d@...> wrote:

Have a fully operational Logger 32 and Newly registered CWGet. 

 

Both are working independent of each other, been trying to get the decode to show up in the Data Terminal CW window.  Is this suppose to work this way?

 

Did get CWget to decode signals and then highlighted the decoded callsign and with a right click was able select “Call” but it would not populate the Logger32 logging window.

 

Anyone got a little help in this area

 

Sent from Mail for Windows 10

 


 

 

--
73 de aki
JA1NLX


Re: Logger32 and CWGet

ORRIN <wo4d@...>
 

OK, I made some snips this morning to document the setup for CWGet/Logger32.  So if you would like I can pass these along for anyone else’s use or for the “Logger32 Help Docs” if desireable—just let me know. 

 

Thanks again for the help with the setup and the quick response with the new .exe

 

73, Orrin/WO4D

 

Sent from Mail for Windows 10

 

From: Rick Ellison
Sent: Saturday, January 25, 2020 9:58 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

I think we updated the workings with CWGet in N1MM when we updated to .net but everything continues to work.

 

73 Rick

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Bob
Sent: Saturday, January 25, 2020 7:44 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

It appears the CwGet have made some unexpected/unannounced changes since the original interface was written. I have made code changes to match, and sent you a recompiled Logger32.exe to test. When you get an eMail from pCloud, download the file over the existing Logger32.exe in your \Logger32 directory. An operational note: If you run Logger32 as an Administrator, run CwGet as an Administrator. SeventyThree(s).

On January 24, 2020 at 7:02 PM ORRIN <wo4d@...> wrote:

Have a fully operational Logger 32 and Newly registered CWGet. 

 

Both are working independent of each other, been trying to get the decode to show up in the Data Terminal CW window.  Is this suppose to work this way?

 

Did get CWget to decode signals and then highlighted the decoded callsign and with a right click was able select “Call” but it would not populate the Logger32 logging window.

 

Anyone got a little help in this area

 

Sent from Mail for Windows 10

 


 

 


Re: Logger32 and CWGet

ORRIN <wo4d@...>
 

OK, sorry I missed the portion that talked about running in the “as Adminstrator”.  Started both CWGet and Logger32 as administrator and the new .exe WORKED !!! 

 

Sorry I overlooked that in the message below.

 

Thanks so much for the help!  Great program with lots of features. 

 

Sent from Mail for Windows 10

 

From: Rick Ellison
Sent: Saturday, January 25, 2020 9:58 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

I think we updated the workings with CWGet in N1MM when we updated to .net but everything continues to work.

 

73 Rick

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Bob
Sent: Saturday, January 25, 2020 7:44 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

It appears the CwGet have made some unexpected/unannounced changes since the original interface was written. I have made code changes to match, and sent you a recompiled Logger32.exe to test. When you get an eMail from pCloud, download the file over the existing Logger32.exe in your \Logger32 directory. An operational note: If you run Logger32 as an Administrator, run CwGet as an Administrator. SeventyThree(s).

On January 24, 2020 at 7:02 PM ORRIN <wo4d@...> wrote:

Have a fully operational Logger 32 and Newly registered CWGet. 

 

Both are working independent of each other, been trying to get the decode to show up in the Data Terminal CW window.  Is this suppose to work this way?

 

Did get CWget to decode signals and then highlighted the decoded callsign and with a right click was able select “Call” but it would not populate the Logger32 logging window.

 

Anyone got a little help in this area

 

Sent from Mail for Windows 10

 


 

 


Re: Problem with ft8 blocking filters

Bob
 

With just the QSO this band/mode B4 filter turned on, I see this



The moment I turn on the Show only highlighted callsign/gridsquares filter the UDP BandMap is cleared. Nothing, as expected. In your case the UDP BandMap shows with a gray background. Is it possible that you have a highlight color of gray? The default highlight color for unknown band/mode is gray. It's hard to see a gray on gray highlight. SeventyThree(s).

On January 25, 2020 at 1:45 PM Mike <ch25@...> wrote:

No, those stations were not worked/confirmed before, but as DXCC it is worked/confirmed.
Prior to v404 it was blocked, not visible. Only DXCC I saw were those I need to work.
In v404 and higher UDP window is flooded with callsigns which as DXCC are already confirmed - not needed to work.
See attached screenshot. 3 FT8 rotations, UDP window flooded with data was not visible before update.

Is there any way in current L32 version to block DXCC units which are confirmed already to don't see them on UDP window?

Something what is working in DX spots window suddenly stopped working in UDP window in 404 update and onwards.
Mike

 


Re: Problem with ft8 blocking filters

Mike
 

No, those stations were not worked/confirmed before, but as DXCC it is worked/confirmed.
Prior to v404 it was blocked, not visible. Only DXCC I saw were those I need to work.
In v404 and higher UDP window is flooded with callsigns which as DXCC are already confirmed - not needed to work.
See attached screenshot. 3 FT8 rotations, UDP window flooded with data was not visible before update.

Is there any way in current L32 version to block DXCC units which are confirmed already to don't see them on UDP window?

Something what is working in DX spots window suddenly stopped working in UDP window in 404 update and onwards.
Mike


Re: Problem with ft8 blocking filters

Bob
 

Looking at the picture of the UDP BandMap, I see no callsigns with an X for QSOd B4. If some of the stations have been QSOd B4, then Recalculate your stats and see if that solves the problem ... Click TOOLS |  DATABASE MAINTENANCE | RECALCULATE STATISTICS. SeventyThree(s).

On January 25, 2020 at 12:46 PM Mike <ch25@...> wrote:

After update of L32 I have a problem with FT8 blocking filters.
On UDP bandmap I see callsigns I have already confirmed on FT8.
It wasn't like that before.
My current blocking settings are as on screenshots.
No change on my side except L32 update.
Any help please?
Mike

 


Problem with ft8 blocking filters

Mike
 

After update of L32 I have a problem with FT8 blocking filters.
On UDP bandmap I see callsigns I have already confirmed on FT8.
It wasn't like that before.
My current blocking settings are as on screenshots.
No change on my side except L32 update.
Any help please?
Mike


Re: sample macro file for MMVARI-engine

Dave Colliau
 

Its pretty simple and in the help file
$transmit$
CQ CQ CQ de $mycall$ $mycall$ $mycall$
CQ CQ CQ de $mycall$ $mycall$ $mycall$ k
$receive$
Dave N8DC

On January 25, 2020 at 10:46 AM Wolf DL1GWW <weissfuss@...> wrote:

Hi all,
how can I get a working sample macro file? All my macro fields are empty, seems to be a lot of work to create them all new. So a file for copying into the MMVARISoundCardMacros.ini would be a great help for beginning.
Found nothing like that in the "Files" section.
TNX Wolf

 


sample macro file for MMVARI-engine

Wolf DL1GWW
 

Hi all,
how can I get a working sample macro file? All my macro fields are empty, seems to be a lot of work to create them all new. So a file for copying into the MMVARISoundCardMacros.ini would be a great help for beginning.
Found nothing like that in the "Files" section.
TNX Wolf


Re: Logger32 and CWGet

Rick Ellison
 

I think we updated the workings with CWGet in N1MM when we updated to .net but everything continues to work.

 

73 Rick

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Bob
Sent: Saturday, January 25, 2020 7:44 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

It appears the CwGet have made some unexpected/unannounced changes since the original interface was written. I have made code changes to match, and sent you a recompiled Logger32.exe to test. When you get an eMail from pCloud, download the file over the existing Logger32.exe in your \Logger32 directory. An operational note: If you run Logger32 as an Administrator, run CwGet as an Administrator. SeventyThree(s).

On January 24, 2020 at 7:02 PM ORRIN <wo4d@...> wrote:

Have a fully operational Logger 32 and Newly registered CWGet. 

 

Both are working independent of each other, been trying to get the decode to show up in the Data Terminal CW window.  Is this suppose to work this way?

 

Did get CWget to decode signals and then highlighted the decoded callsign and with a right click was able select “Call” but it would not populate the Logger32 logging window.

 

Anyone got a little help in this area

 

Sent from Mail for Windows 10

 


 


Re: Logger32 and CWGet

Rick Ellison
 

Last I knew it did I will test it out this morning and make sure it does. I have not made any changes to it since I added it in many years ago.

 

73 Rick

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Bob
Sent: Saturday, January 25, 2020 1:43 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 and CWGet

 

Rick, CwGet doesn't work with Logger32 anymore. I downloaded the new version and right out of the box Logger32 couldn't see CwGet ... The Window caption has changed. Easily fixed, I search for a partial match of caption ... Now I can see the CwGet window again. But I'm not receiving and Windows messages from CwGet ... Does it still interface to N1MM+? SeventyThree(s).

On January 24, 2020 at 7:38 PM Rick Ellison <rellison@...> wrote:

It’s been a while since I used these 2 together. But the Decoded text from CWGet only appears in the CWGet window it does not get passed to Logger32’s data window. In CWgets settings window click on the text tab and you need to check the box that says Catch word on mouse click or something like that. This will allow you to place the mouse over certain words in the CWGet text and have that text sent into Logger32’s Entry window. You select the item you want to send by the right click menu that pops up.

 

73 Rick N2AMG

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of ORRIN
Sent: Friday, January 24, 2020 7:03 PM
To: hamlogger@groups.io
Subject: [hamlogger] Logger32 and CWGet

 

Have a fully operational Logger 32 and Newly registered CWGet. 

 

Both are working independent of each other, been trying to get the decode to show up in the Data Terminal CW window.  Is this suppose to work this way?

 

Did get CWget to decode signals and then highlighted the decoded callsign and with a right click was able select “Call” but it would not populate the Logger32 logging window.

 

Anyone got a little help in this area

 

Sent from Mail for Windows 10

 

 

 


 


Re: Logger32 and CWGet

Bob
 

It appears the CwGet have made some unexpected/unannounced changes since the original interface was written. I have made code changes to match, and sent you a recompiled Logger32.exe to test. When you get an eMail from pCloud, download the file over the existing Logger32.exe in your \Logger32 directory. An operational note: If you run Logger32 as an Administrator, run CwGet as an Administrator. SeventyThree(s).

On January 24, 2020 at 7:02 PM ORRIN <wo4d@...> wrote:

Have a fully operational Logger 32 and Newly registered CWGet. 

 

Both are working independent of each other, been trying to get the decode to show up in the Data Terminal CW window.  Is this suppose to work this way?

 

Did get CWget to decode signals and then highlighted the decoded callsign and with a right click was able select “Call” but it would not populate the Logger32 logging window.

 

Anyone got a little help in this area

 

Sent from Mail for Windows 10

 


 


Re: LBP2 - Na3P - WSJT-X

Bob
 

Jim, the UDP messages between WSJT and Logger32 are how the two programs talk to each other. Also, both WSJT and Logger32 can talk to the radio (but not at the same time) by serial port. Exactly what is the object of the exercise? What do you want to connect to where? SeventyThree(s).

On January 24, 2020 at 7:10 PM Jim Ciurczak <nfjimc@...> wrote:

Thanks Bob, well I thought the UDP communication was how they worked in unison but for some reason if I connect only Logger32 to the rig via the LBP2 bridge software, WSJT-X no longer communicates to Logger32. I lose all CAT connections and freq control. So I'm guessing something within LBP2 is the cause. I'll try experimenting a bit more.

As always thanks for your quick reply and help.

Jim K2QB

 


Re: Logger32 and CWGet

Bob
 

Rick, I've Googled around, but can't find any reference to programmatic interfacing to CwGet anywhere. I'm very tempted to simply remove the relavent section from the Help file. SeventyThree(s).

PS. I did find all kinds of personal data about you though. Nice pictures by the way, I made copies for the Chinese facial recognition databases, and also sent them to Rudy and Hunter to deliver to my buddy Fuzzy Bear next time they visit the Ukraine :).

On January 24, 2020 at 7:38 PM Rick Ellison <rellison@...> wrote:

It’s been a while since I used these 2 together. But the Decoded text from CWGet only appears in the CWGet window it does not get passed to Logger32’s data window. In CWgets settings window click on the text tab and you need to check the box that says Catch word on mouse click or something like that. This will allow you to place the mouse over certain words in the CWGet text and have that text sent into Logger32’s Entry window. You select the item you want to send by the right click menu that pops up.

 

73 Rick N2AMG

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of ORRIN
Sent: Friday, January 24, 2020 7:03 PM
To: hamlogger@groups.io
Subject: [hamlogger] Logger32 and CWGet

 

Have a fully operational Logger 32 and Newly registered CWGet. 

 

Both are working independent of each other, been trying to get the decode to show up in the Data Terminal CW window.  Is this suppose to work this way?

 

Did get CWget to decode signals and then highlighted the decoded callsign and with a right click was able select “Call” but it would not populate the Logger32 logging window.

 

Anyone got a little help in this area

 

Sent from Mail for Windows 10

 

 



 


Re: Logger32 and CWGet

Bob
 

Rick, CwGet doesn't work with Logger32 anymore. I downloaded the new version and right out of the box Logger32 couldn't see CwGet ... The Window caption has changed. Easily fixed, I search for a partial match of caption ... Now I can see the CwGet window again. But I'm not receiving and Windows messages from CwGet ... Does it still interface to N1MM+? SeventyThree(s).

On January 24, 2020 at 7:38 PM Rick Ellison <rellison@...> wrote:

It’s been a while since I used these 2 together. But the Decoded text from CWGet only appears in the CWGet window it does not get passed to Logger32’s data window. In CWgets settings window click on the text tab and you need to check the box that says Catch word on mouse click or something like that. This will allow you to place the mouse over certain words in the CWGet text and have that text sent into Logger32’s Entry window. You select the item you want to send by the right click menu that pops up.

 

73 Rick N2AMG

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of ORRIN
Sent: Friday, January 24, 2020 7:03 PM
To: hamlogger@groups.io
Subject: [hamlogger] Logger32 and CWGet

 

Have a fully operational Logger 32 and Newly registered CWGet. 

 

Both are working independent of each other, been trying to get the decode to show up in the Data Terminal CW window.  Is this suppose to work this way?

 

Did get CWget to decode signals and then highlighted the decoded callsign and with a right click was able select “Call” but it would not populate the Logger32 logging window.

 

Anyone got a little help in this area

 

Sent from Mail for Windows 10

 

 



 


Re: Control sound card data window from the radio control panel

Jay Mason
 

Thank you 
I was doing that as well.
Thank you
De N3OW 


Re: Logger32 and CWGet

Rick Ellison
 

It’s been a while since I used these 2 together. But the Decoded text from CWGet only appears in the CWGet window it does not get passed to Logger32’s data window. In CWgets settings window click on the text tab and you need to check the box that says Catch word on mouse click or something like that. This will allow you to place the mouse over certain words in the CWGet text and have that text sent into Logger32’s Entry window. You select the item you want to send by the right click menu that pops up.

 

73 Rick N2AMG

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of ORRIN
Sent: Friday, January 24, 2020 7:03 PM
To: hamlogger@groups.io
Subject: [hamlogger] Logger32 and CWGet

 

Have a fully operational Logger 32 and Newly registered CWGet. 

 

Both are working independent of each other, been trying to get the decode to show up in the Data Terminal CW window.  Is this suppose to work this way?

 

Did get CWget to decode signals and then highlighted the decoded callsign and with a right click was able select “Call” but it would not populate the Logger32 logging window.

 

Anyone got a little help in this area

 

Sent from Mail for Windows 10