On 02/27/2021 3:01 PM Marcos Lima via groups.io <py1me@...> wrote:

 

 

Hello there,

 

I discovery a little bug. 

In Get atomic Clock Time Window

The setup options d'ont work.

see picture in anexo

 

I using Ver. 4,0,244

 

73

 

Marcos Lima - PY1 ME

-----Original Message-----
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Chris.9A2X
Sent: 27 February 2021 10:42
To: hamlogger@groups.io
Subject: Re: [hamlogger] Country database exceptions from Club log - update error

Mike,

Since I didn't find any previous posts here or elsewhere on the net with same problem described, I'm not surprised with your info. Hope that someone here have idea how to fix that corruption in my installation.

regards, chris

Hi,
I'm getting the error while trying to update 'Country database exceptions from Club log':
logger32 QRX ...Connection to https://clublog.org/cty.php failed
I checked first all the network/firewall stuff but with no results.
The upper link in Web browser throws the message:
Access to this form requires a valid API key. For more info see: https://clublog.org/need_api.php
It started to show up abt. 3 months ago with v3. It's still here after succcesfull upgrade from v3 to v4 (3.50.424 -> 4.0.132).
I realized that 'Load the LoTW users file (from Clublog)' feature hungs up as well ('Waiting...' sindrome).
73 chris

On 02/26/2021 8:59 AM Kenneth Hansen <khansen@...> wrote:

 

 

It does, but not frequency, so I believe that is why the band map says “I’m lost”

On Fri, Feb 26, 2021 at 8:52 AM Bob < k4cy@...> wrote:

There's supposed to be some kinda JTAlert window that Logger32 can detect, and once found, read the band/mode from the windows caption. That's the theory anyway. SeventyThree(s).

On 02/26/2021 8:47 AM Kenneth Hansen < khansen@...> wrote:

 

 

Good morning,

Found an undocumented feature (I believe)

When I set the band/mode to JTAlert, the band map (not UDP band map) reports 

“I’m lost”, guess it not seeing the frequency 

On Thu, Feb 25, 2021 at 3:04 PM Bob < k4cy@...> wrote:

I don't think so. JTAlert connects to JTDX on UDP port 2237. JTAlert forwards QSL Logged messages only on UDP port 2333 (or something). 

 

So, I'd guess in Logger32 you'd configure like this:

 

a) Open the UDP BandMap.  Set the Band/Mode option to be from JTAlert. Close the UDP BandMap (There's nothing to see).

b) Open one of the receive only UDP sockets on port 2223 (or whatever). 

c) Kick back and make a not to yourself - Damn This DXing is fun.

 

SeventyThree(s).

 

 

there's no data to be displayed in the UDP MandMap.

On 02/25/2021 2:43 PM Kenneth Hansen < khansen@...> wrote:

 

 

Sorry, should be 2333 of course 

On Thu, Feb 25, 2021 at 2:35 PM Kenneth Hansen via groups.io <khansen= satsnj.com@groups.io> wrote:

All,

 

I’m looking at section 32.3 in the manual.

Does the UDP band map work together with JTAlert?

I did set the UDP port to 3332 in Logger32, but when I open the socket, JTAlert stops updating.

What am I missing?

 

de KB2SSE

Ken

--

Kenneth Hansen

Owner

ScanAm Technical Services, LLC

 

 

--

Kenneth Hansen

Owner

ScanAm Technical Services, LLC

 

 

--

Kenneth Hansen

Owner

ScanAm Technical Services, LLC

 

 

 

--

Kenneth Hansen

Owner

ScanAm Technical Services, LLC

On 02/26/2021 8:47 AM Kenneth Hansen <khansen@...> wrote:

 

 

Good morning,

Found an undocumented feature (I believe)

When I set the band/mode to JTAlert, the band map (not UDP band map) reports 

“I’m lost”, guess it not seeing the frequency 

On Thu, Feb 25, 2021 at 3:04 PM Bob < k4cy@...> wrote:

I don't think so. JTAlert connects to JTDX on UDP port 2237. JTAlert forwards QSL Logged messages only on UDP port 2333 (or something). 

 

So, I'd guess in Logger32 you'd configure like this:

 

a) Open the UDP BandMap.  Set the Band/Mode option to be from JTAlert. Close the UDP BandMap (There's nothing to see).

b) Open one of the receive only UDP sockets on port 2223 (or whatever). 

c) Kick back and make a not to yourself - Damn This DXing is fun.

 

SeventyThree(s).

 

 

there's no data to be displayed in the UDP MandMap.

On 02/25/2021 2:43 PM Kenneth Hansen < khansen@...> wrote:

 

 

Sorry, should be 2333 of course 

On Thu, Feb 25, 2021 at 2:35 PM Kenneth Hansen via groups.io <khansen= satsnj.com@groups.io> wrote:

All,

 

I’m looking at section 32.3 in the manual.

Does the UDP band map work together with JTAlert?

I did set the UDP port to 3332 in Logger32, but when I open the socket, JTAlert stops updating.

What am I missing?

 

de KB2SSE

Ken

--

Kenneth Hansen

Owner

ScanAm Technical Services, LLC

 

 

--

Kenneth Hansen

Owner

ScanAm Technical Services, LLC

 

 

--

Kenneth Hansen

Owner

ScanAm Technical Services, LLC

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of SM0YHN@...
Sent: Friday, February 26, 2021 2:07 AM
To: hamlogger@groups.io
Subject: [hamlogger] xml subscriber qrz.com

Hello,
Do I have to be a xml subscriber tog use QRZ.com in connection with Logger32?
73 de
SM0YHN/Thorbjörn Odsjö

Virus-free. www.avast.com

On 25 Feb 2021, at 23:46, Bob <k4cy@...> wrote:

Look at the rotor debug window, Does Logger32 send and command to the rotor to stop it turning? Does Logger32 maybe close the rotor port? Even if it did, I don't think that would/should stop the rotor turning. Is the command correct to turn to the correct heading. or is it a command to turn just a few degrees and then after turning a few degrees it stops because it thinks it is in the correct position?

All I can do is send the correct command. What the rotor does (or does not do) is way above my pay grade.

SeventyThree(s)

On 02/25/2021 5:27 PM sp5ewx <sp5ewx@...> wrote:


Also when I click from the map it moves only 2-3 deg and stops
Mike sp5ewx

śr., 24 lut 2021 o 14:30 Bob <k4cy@...> napisał(a):

Does the rotor work correctly if you command it to turn by clicking on the great circle map? Dos it work at all? What do you see in the rotor debug window when you command the rotor to turn? SeventyThree(s).

On 02/24/2021 2:17 AM sp5ewx <sp5ewx@...> wrote:


I used alfaspid rotor with 3.5 version without any problem . With 4
ver it doesnt react for "home" command and when I use Ctrl+A or Alt+A
it starts to turn but after a few degrees stops and bar rotor pointer
on greyline window disappears. Any suggestions?
Mike sp5ewx

On 02/25/2021 5:27 PM sp5ewx <sp5ewx@gmail.com> wrote:


Also when I click from the map it moves only 2-3 deg and stops
Mike sp5ewx

śr., 24 lut 2021 o 14:30 Bob <k4cy@comcast.net> napisał(a):

Does the rotor work correctly if you command it to turn by clicking on the great circle map? Dos it work at all? What do you see in the rotor debug window when you command the rotor to turn? SeventyThree(s).

On 02/24/2021 2:17 AM sp5ewx <sp5ewx@gmail.com> wrote:


I used alfaspid rotor with 3.5 version without any problem . With 4
ver it doesnt react for "home" command and when I use Ctrl+A or Alt+A
it starts to turn but after a few degrees stops and bar rotor pointer
on greyline window disappears. Any suggestions?
Mike sp5ewx

Does the rotor work correctly if you command it to turn by clicking on the great circle map? Dos it work at all? What do you see in the rotor debug window when you command the rotor to turn? SeventyThree(s).

On 02/24/2021 2:17 AM sp5ewx <sp5ewx@gmail.com> wrote:


I used alfaspid rotor with 3.5 version without any problem . With 4
ver it doesnt react for "home" command and when I use Ctrl+A or Alt+A
it starts to turn but after a few degrees stops and bar rotor pointer
on greyline window disappears. Any suggestions?
Mike sp5ewx

Does the rotor work correctly if you command it to turn by clicking on the great circle map? Dos it work at all? What do you see in the rotor debug window when you command the rotor to turn? SeventyThree(s).

On 02/24/2021 2:17 AM sp5ewx <sp5ewx@gmail.com> wrote:


I used alfaspid rotor with 3.5 version without any problem . With 4
ver it doesnt react for "home" command and when I use Ctrl+A or Alt+A
it starts to turn but after a few degrees stops and bar rotor pointer
on greyline window disappears. Any suggestions?
Mike sp5ewx

On 02/25/2021 2:57 PM Fabio IZ8MBW via groups.io <iz8mbw@...> wrote:

 

 

Hi all.

The ARRL provide an official LoTW users list, the list is:  https://lotw.arrl.org/lotw-user-activity.csv

More info on:  developer-query-lotw-users — Logbook of the World (LoTW) Help Pages

 

developer-query-lotw-users — Logbook of the World (LoTW) Help Pages Developer Information: Querying LoTW for a List of Users with Last Upload Information LoTW provides a web servi...

 

 

For what I know, currently, Logger32 does not support this file list type (CSV format).

In "Setup" of "DX Spots" window if I configure the URL " https://lotw.arrl.org/lotw-user-activity.csv" for "Load the LoTW users file" it doesn't work (I think because the file content is not what Logger32 wants).

 

 

Any possibility, also for the future, to use that ARRL official list?

 

Thanks.

 

 

73s

Fabio, IZ8MBW

On 02/25/2021 2:43 PM Kenneth Hansen <khansen@...> wrote:

 

 

Sorry, should be 2333 of course 

On Thu, Feb 25, 2021 at 2:35 PM Kenneth Hansen via groups.io <khansen= satsnj.com@groups.io> wrote:

All,

 

I’m looking at section 32.3 in the manual.

Does the UDP band map work together with JTAlert?

I did set the UDP port to 3332 in Logger32, but when I open the socket, JTAlert stops updating.

What am I missing?

 

de KB2SSE

Ken

--

Kenneth Hansen

Owner

ScanAm Technical Services, LLC

 

 

--

Kenneth Hansen

Owner

ScanAm Technical Services, LLC