|
Re: Unable to change data in logbook window
Hi Gary,
Well I don't have your symptoms!! And I rarely have to edit the log. I discovered this problem when I went to update a name for a contact, which had changed since last
Hi Gary,
Well I don't have your symptoms!! And I rarely have to edit the log. I discovered this problem when I went to update a name for a contact, which had changed since last
|
By
Ken McVie
·
#81833
·
|
|
Re: Unable to change data in logbook window
Hi Ken.
For some time now (months) I have had problems editing my logbook too, particularly just after I have logged a QSO. After clicking to select a logbook field such as the notes, there is a
Hi Ken.
For some time now (months) I have had problems editing my logbook too, particularly just after I have logged a QSO. After clicking to select a logbook field such as the notes, there is a
|
By
Gary Hinson
·
#81832
·
|
|
Re: Unable to change data in logbook window
Hi Jim,
Your method doesn't work here either!! It doesn't matter what I do, I can't change anything on a line. I left click on a line anywhere, & most of the windows open give a bit of
Hi Jim,
Your method doesn't work here either!! It doesn't matter what I do, I can't change anything on a line. I left click on a line anywhere, & most of the windows open give a bit of
|
By
Ken McVie
·
#81831
·
|
|
Re: Unable to change data in logbook window
You are supposed to LEFT click on it Ken, not right click. Try that and see if it works.
Yes we are good virus wise, but if they open the borders to much we'll get it again for sure.
You are supposed to LEFT click on it Ken, not right click. Try that and see if it works.
Yes we are good virus wise, but if they open the borders to much we'll get it again for sure.
|
By
Ken McVie
·
#81830
·
|
|
Re: Unable to change data in logbook window
Ken,
I suspect there are multiple ways to make changes in the log data, but what I do is click on the cell I want to change, placing the cursor after the last digit of the entry I want to change,
Ken,
I suspect there are multiple ways to make changes in the log data, but what I do is click on the cell I want to change, placing the cursor after the last digit of the entry I want to change,
|
By
Jim SIMON
·
#81829
·
|
|
Re: Unable to change data in logbook window
Ah, sorry Ken. My method works for me but right clicking doesn’t work for me, it just lists a load of options.
I’m also using W10 which so far MS hasn’t managed to screw up with their
Ah, sorry Ken. My method works for me but right clicking doesn’t work for me, it just lists a load of options.
I’m also using W10 which so far MS hasn’t managed to screw up with their
|
By
kenfilmer@outlook.com
·
#81828
·
|
|
Re: Unable to change data in logbook window
Hi Ken, thanks for the reply,
Following the help file instructions doesn't work here any more, for some reason. I just tried it again using your method & that don't work either!!
Hi Ken, thanks for the reply,
Following the help file instructions doesn't work here any more, for some reason. I just tried it again using your method & that don't work either!!
|
By
Ken McVie
·
#81827
·
|
|
Re: Unable to change data in logbook window
Morning Ken
Belated Merry Christmas and Happy New Year to all on this group..
I hope I’ve understood the problem correctly, to change what’s in the logbook window I simply right click on
Morning Ken
Belated Merry Christmas and Happy New Year to all on this group..
I hope I’ve understood the problem correctly, to change what’s in the logbook window I simply right click on
|
By
kenfilmer@outlook.com
·
#81826
·
|
|
Unable to change data in logbook window
Hi all, hope you all enjoyed a good Xmas!
I have a problem with not being able to change any data in the logbook window for any QSO's recorded there. This has been like this for the
Hi all, hope you all enjoyed a good Xmas!
I have a problem with not being able to change any data in the logbook window for any QSO's recorded there. This has been like this for the
|
By
Ken McVie
·
#81825
·
|
|
Search in logbook
A suggestion for the new version if possible, could the search within the logbook be expanded in the comment field? I am attaching a screenshot, I have comments that I want to search. Thanks for the
A suggestion for the new version if possible, could the search within the logbook be expanded in the comment field? I am attaching a screenshot, I have comments that I want to search. Thanks for the
|
By
Luis EA5L
·
#81824
·
|
|
Re: FT-891
OK, thanks.
I was a replying to someone who said they couldn't use Logger32 because the radio the FT-891 isn't listed.
For the commands that Logger uses, I'm pretty sure any Yaesu radio setting would
OK, thanks.
I was a replying to someone who said they couldn't use Logger32 because the radio the FT-891 isn't listed.
For the commands that Logger uses, I'm pretty sure any Yaesu radio setting would
|
By
Vince Shirley
·
#81823
·
|
|
Re: FT-891
Vince,
I use an FT 891 and use logger32. The setting is the same as the FT-991. Works a treat.
Vince,
I use an FT 891 and use logger32. The setting is the same as the FT-991. Works a treat.
|
By
keith hotchkiss
·
#81822
·
|
|
Re: HamQTH stopped transferring
Hi Bob,
Yes, ENABLE QSO UPDATES FROM LOOKUPS is checked. I kept playing with it, I don't know what I did, but now it works.
Thanks Bob for the great Logger program. uKhisimusi oMuhle to you and your
Hi Bob,
Yes, ENABLE QSO UPDATES FROM LOOKUPS is checked. I kept playing with it, I don't know what I did, but now it works.
Thanks Bob for the great Logger program. uKhisimusi oMuhle to you and your
|
By
jim watkins
·
#81821
·
|
|
HamQTH not working
I have been using the Auto Transfer with HamQTH for a long time now and it has worked flawlessly, until today. I transferred an adi file from N1MM. When I hit on a line in the log book, HamQTH pops up
I have been using the Auto Transfer with HamQTH for a long time now and it has worked flawlessly, until today. I transferred an adi file from N1MM. When I hit on a line in the log book, HamQTH pops up
|
By
jim watkins
·
#81820
·
|
|
HamQTH Transfer stopped
I have been using the Auto Transfer with HamQTH for a long time now and it has worked flawlessly, until today. I transferred an adi file from N1MM. When I hit on a line in the log book, HamQTH pops up
I have been using the Auto Transfer with HamQTH for a long time now and it has worked flawlessly, until today. I transferred an adi file from N1MM. When I hit on a line in the log book, HamQTH pops up
|
By
jim watkins
·
#81819
·
|
|
Re: HamQTH stopped transferring
Jim, right click on the Logbook Page window. Click SETUP. See the menu ENABLE QSO UPDATES FROM LOOKUPS. Is it checked? SeventyThree(s) and Mbaba Mwana Waresa says uKhisimusi oMuhle.
Jim, right click on the Logbook Page window. Click SETUP. See the menu ENABLE QSO UPDATES FROM LOOKUPS. Is it checked? SeventyThree(s) and Mbaba Mwana Waresa says uKhisimusi oMuhle.
|
By
Bob
·
#81818
·
|
|
Re: HamQTH stopped transferring
Hi Bob,
Like your Guardian Angel. Lets hope she flies fast like mine. Hi!
I am chasing US Counties on Digital Modes. When I imported my QSO's from N1MM into Logger32, I like to fill in County names
Hi Bob,
Like your Guardian Angel. Lets hope she flies fast like mine. Hi!
I am chasing US Counties on Digital Modes. When I imported my QSO's from N1MM into Logger32, I like to fill in County names
|
By
jim watkins
·
#81817
·
|
|
Re: telnet spots only works for 25 lines
I have 32 lines, and it works fine.
73 de KB2SSE
--
Kenneth Hansen
Owner
ScanAm Technical Services, LLC
I have 32 lines, and it works fine.
73 de KB2SSE
--
Kenneth Hansen
Owner
ScanAm Technical Services, LLC
|
By
Kenneth Hansen
·
#81816
·
|
|
Re: telnet spots only works for 25 lines
Fred, sorry I can not duplicate this. I expanded the DX Spots window to show 61 rows (the max with my setup). All 61 rows show the tooltips. SeventyThree(s)AndMerryChristmas.
Fred, sorry I can not duplicate this. I expanded the DX Spots window to show 61 rows (the max with my setup). All 61 rows show the tooltips. SeventyThree(s)AndMerryChristmas.
|
By
Bob
·
#81815
·
|
|
telnet spots only works for 25 lines
Using version 3.50.424 and have telnet spots window large enough to display 32 lines of spots When I run my cursor down the list of spots it displays info about each line. But when I get to the
Using version 3.50.424 and have telnet spots window large enough to display 32 lines of spots When I run my cursor down the list of spots it displays info about each line. But when I get to the
|
By
Fred-K0FG
·
#81814
·
|