I have been using Logger32 with WSJT-X for a long time and all works OK on my 'old' PC. I then installed it onto a new PC and I configured both L32 and WSJT-X exactly the same as the old PC. On the

I have one for the 2nd tower with yaesu ..it it is not the problem here. So i use Spid and controler work fine 1200 bauds 1N8 with « n1mm rotor » and « pst rotator » and i do not understand

Maybe this will help: here is the rotator chapter extracted from the new Logger32 v4 User Manual written to accompany the version 4 release (soon!). https://www.g4ifb.com/40_Rotators.pdf

Hi Damien, Perhaps you could try a Rotor interface between your Spid and your PC. I use one between my Yaesu G-450C (not supported by L32) and my PC. Check it

Hi , all ok i use it during few years …. And since 3years do not work ! Work with yaesu when i use the 2nd tower rotator sor 6m/2m/70cms ants , but not with Spid … 73s De :

If you right click on the grey bar besides the ViewDX button and check your settings, „Rotor direction pointers | Setup rotor direction wedge“ -- how is it? 73 Villi TF3VS

Yes Steph , Seem logger32 not able to read Spid infos RXD even if in the debug windoxs , example on the small screen copy asking to turn 225 , Was working until 2-3years not no more.. and only «

Mike, yes, ADIF import/export is not Logger32 release version dependent. SeventyThree(s)AndMerryChristmas.

Hi Damien, Indeed, it is very convenient! 73 Le 21/12/2020 à 11:51, f4azf_damien a écrit : -- Everything looks impossible to the

HI, I assume v4 will export an ADIF log file that can be imported into v3.50.xxx with at least the basic detail as defined by the ADIF fields. Regards, Mike VP8NO

Use the FT-950 setting, that should work. All Yaesu radios use more or less the same command set so if FT-950 doesn't do what you want, try the others. Vince

Hello Here, when i used the RAK this worked correctly. I don’t remember the setup sorry. 73s Olivier F4FQH

Hi Steph , Yes was just to put rotator 1 You are lucky to have the » beam indicator wedge « , here on my Spid bigrak, it do not work …must use n1mm rotator to have the direction… maybee

Harold, the simple/direct answer to you question is I have no <explicative deleted> idea. Until I read your message, I had never heard of an FT-891, and now that I have, it's still not on my Christmas

Your beam is pointing in the right direction, but I still can't hear you. I need a better logging program, or maybe a radio would help. SeventyThree(s)AndMerryChristmasToAll.

Hi, Thank you. Everything works perfectly now. 73 de Steph, F5NZY. -- Everything looks impossible to the people who never tried, anything.Dr J-L

Jim, first let me respond your (in my face) signature line about your guardian angel ... My guardian angel is Mbaba Mwana Waresa (Google it). You probably should hit your DELETE

I would like to know if in the near future would the FT-891 be able to operate with Logger32? I been using this program when it first came out. Now I'm taking a back seat because there is no FT-891 in

I have been using the Auto Transfer with HamQTH for a long time now and it has worked flawlessly, until today. I transferred an adi file from N1MM. When I hit on a line in the log book, HamQTH pops up

Verify that in the table of bands and modes found in tools, the band you are using is configured as active rotor with the number 1.I attach an image