Does any one have problem with cluster? When I try to start cluster, there is an error 4006 from Telnet socket -Winsock returned: Wrong protocol or connection state for the requested transaction or

UPDATE - Every time I try the new installation process a copy of st6unst.exe appears in the Windows directory. There are currently 11 copies of this in the Windows directory, but only one shows an

Works for me. I downloaded the full install zip file onto the desktop. Double clicked on it. Double clicked on SETUP.EXE. No voodoo required, just four mouse clicks. 73.

Trying to do a new install on a new computer (16G, i5@2.3GHz, Win10 Pro, v2004). After clicking setup.exe I get "Invalid Property Value, An unexpected error has occurred". When I close the error

You have not provided a whole lot of information. Have you checked that the frequency is defined in 'Setup bands and modes'? Jim Altman jaltman636@...

Nobody knows what is wrong in my setup ?? Mike sp5ewx

Further to my last, this has indeed cured it. Many thanks, Bob - as usual, operator error is the culprit! Logging from JTDX has now resumed (I'll not make that mistake again) 73, Sean

Hi Bob, Ahh - that text comes from JTDX, no mention of string length there. I will change that right now. Hopefully, that will cure it. 73, Sean - G4UCJ

Sean, the first thing that jumps out at me is the TX_PWR field of <TX_PWR:17>5W + 5 ELE AT 6M. The ADIF spec calls for a power in Watts with a value greater than 0. And, internally, Logger32 only

Hi Gerald, Yes, it is a similar problem. I tried what was suggested in that discussion, but it made no difference to my problem, unfortunately. 73, Sean

Hi Bob, Thanks for the speedy reply. I've got the backup ADIF (used it to make a new log in case the original one had been corrupted), so it's safe to proceed! All I want to do is to be able to have

Sean, I see that there has been another issue reported with a similar description. Perhaps this might be related to your issue. https://groups.io/g/hamlogger/message/79406 -- Gerald, VE1DT

Sean, the error message is from the Logger32 database to tell you that you were about to write invalid data to the logbook. I have three recomendations: 1) Are you trying to do

I've been using JTDX with Logger for ages now, and was able to log from, JTDX into logger via UDP or TCP without issue. Now though, I am getting an error message every time. I've tried using TCP, UDP

Frequency loss - PROBLEM SOLVED - This post is for anyone else getting this. From the IC7300 using a CT-17 interface, I had the PC connected for logging, an ACOM600s amplifier, and a 3el SteppIR Not

I expect there is a lot to it but what would the chances be of have added to the "View" tab a Spectrum Display, much like the one in N1MM. This together with DX Cluster would allow for the use of the

I have the FTdx5000 with the RSP1A connected to the 9MHz IF output. I use Logger32 as my logging software and SDRConsole V3 as my panadapter display. I have VSPE set up to split off COM 1 (the

Best wishes (s) Colin, G3PSM

I t gets re-milked on an annual basis. 73’ed Jim Altman jaltman636@...

One more important Info I forgot! You have to set the ADIF-field PROP_MODE to the value SAT If not: also LOTW will not accept the QSOs. 73, Lenz, DL8RDL