Yes...one more thing.. In the picture yesterday It was a test with a full new install. No setting, nothing. And the same problem. 73 Ernö

Yes, it is. But we dont't know what was then. As it went bad, so improved...hi. and meanwhile i touch anything 73 Ernö

... probably the same problem you had reported before. 73.

It is why I use VE7CC user. I have 3 DX clusters accessed from it and so one goes down does not matter or even two go down. 73 David G3YYD

Same problem here for the past couple of days. Jim W1YY/7

I just tried dxc.ve7cc.net on port 23. It spewed out the same worthless garbage that they all do. SeventyThree(s).

Its back up now. I had issues also but thats why you set it up to automatically go to someone else. Dave N8DC

------ Forwarded Message ------

From Lee - hopefully decrease some of my monthly costs associated with Internet, cell phones, and TV.  Of course this new modem/router broke everything.  After several days I finally was able to

Hallo Guys, It worked for 2-3 weeks. After that, nothing again.I didn't change anything. But now i just did a full reinstall. I just set up the cluster. Nothing else. No LOG and others. In a few

I could not connect earlier in the week but whatever was the problem, it went away. I connected OK on Wednesday but have not tried again since. 73, Duncan, G3WZD From: <hamlogger@groups.io> on

Message from Lee Sawkins (Ve7CC owner) posted on 15th on the user group: "I am ok. Have been having power, Internet, phone, email problems all at the same time. I have power now but other problems

NEIL: I have been experiencing the same here in Seattle, WA for the last couple of days.

Good Day; My telnet to VE7CC has quit working, my other clusters are ok. Tried a number of different combinations ve7cc dxc.ve7cc.net 7300 ve7cc dxc.ve7cc.net 23 ve7cc 127.0.0.1 23 ve7cc 27.0.0.1

DR Thorbjörn, I do assume that all your QSOs in the log are fake and you want to start from a start. The easiest way is to click on the File menu and then Change Logbook. Write a name that you

Hello, First of all: Thanks to all giving me help to connect my Elecraft K3 to Logger32. I have tried all proposals. Finally I was wondering about my connection from K3 to my laptop, so I bought a new

Vince, thanks for the additional testing/information. Unfortunately it hasn't provided any additional clues as to where/what the problem is. And, I have not been able to duplicate the problem. So,

Hi Bob, To answer your questions 1) Very short, just a few letters 2) No any QSO shows this behaviour 3) Just the same for any band. I tried it on 15, 20m and 60m with the same results 4) Yes, the

Aki, this looks like ver 4.0 window style. I will check tomorrow. 73.

Bob I do not duplicate reported problem, however I see this. 1. Note is already logged for QSO with K4CY. 2. Select this QSO and click "Show note window" 3. Click any