Lenz’ Bob is still working on your problem and has submitted the following additional information. …………………………………………………………………………….. In

Lenz, Try This provided by Bob I setup my transverter like this: I typed 2400300<ENTER> (my setup is to show the frequency in kHz) in the callsign field of the Logbook Entry Window.

Might add, before performing any log imports or major edits it is worth backing up the database using the first icon from the left on the Logger32 top tool bar. -- 73, John - G7SSE

Export the logbook to an ADIF file.. File > Export logs > Jim – w5ifp-

Now do an ADI backup !!!! 73 Ken ZL4NR

Hi Bob, hi all! I got problems to set up the transverter-function with my radio. It seems, LOGGER cannot calculate more than 2147483,64 kcs. In detail: I was trying to setup the transverter-frequency

Good day all, Recently while updating I got the message: Error 53 (File not found) in procedure mdiForm_Load of Form MDIForm1 Error on line 5470 Logger32 3.50.412 Any cure for this ? 73 Seli

Thanks to all for your help, I have added the missing QSOs manually and all calculations etc are good. Thanks again. 73 Phil VE7YBH/G3YBH -- Phil Storey,Vancouver Operations

Hi Vesko, I just completed manually adding the 305 missing QSOs, fortunately they were from the 2018 CQ WW contest so it relatively easy and fast. Thanks for your help !! 73

Phil If you use Clublog you can import your qso's into a new lognook. 73 Jan PA4JJ Op 9-4-2020 om 02:22 schreef Phil Storey: --

Aki, I have done a backup for the 1100 that I see, so I will add the 300 Qs later manually. I can only see numbers 1- 1100 plus the last 3 which are numbered 1411,1412 and 1413.

Phil I say again. For some reason your Logbook is broken . Repeat partial export. Import these step-by-step in new empty Logbook. Ignore missing QSOs. You can add these QSOs later

Villi, also my DXCC All confirmations, All credits for Digital, Mixed and CW reflect the 1413 QSOs that are the total in the database, but my phone scores are incorrect reflecting just 1100, so

Hello Villi, Thanks for your reply, now I have another issue, looking at the database I see QSO numbers 1 to 1100 which I have downloaded to a flash drive, but then the next line is

Just a nice-to-have. I run Logger 32 with the bandmap for the band I am tuned to in a full-height window, and the monitor bandmaps for the other bands in half-height windows, all arranged in an neat

Phil, I have seen this happen, why I do not know. What I did was this: Export the whole log to ADIF. (The empty line does not prevent export, only statistic calculation.) Made a new logbook with

Allesandro I think it is impossible to change order. 73 -- 73 de aki JA1NLX

Hi all, I use Logger32, version 3.50.412 on Win10. The default order sequence of the Telnet tabs is the following: 1-TNC /2- TELNET /3- Message /4- AGWpe /5- Localhost I would like to change the order

Hi, Phil, If the problem is in VE7YBH, delete this QSO from the Log, rewrite it again and recalculate, ... I wish you success, Vesko LZ2JE

Phil Try following steps. 1. Export Logbook partially. a. QSO number 1 to 1109 as Test_1.adi b. QSO number 1101 to 1405 as Test_2.adi 2. Make empty Logbook. 3.