Hi Dave N8DC, thanks. In the FT1000mp there is no PKT-USB mode, only PKT-LSB and PKT-FM. To configure the PKT-USB mode I have to use the option that the FT1000mp offers me: I

Mystery solved. If the QSO is not flagged as CQWPX submitted or granted, then there's nothing to show (other than worked) in the CQWPX Award Window. SeventyThree(s).

Hi Bob That did the trick thanks appreciated For Tom (FDM). I knew it was not wstj but was part of the changes N2 programe made. The fun of it all. But I do like the interface between both L32 and

What does the user button do ? What do you want it to do. That is most likely a different command than a regular cat command. I may have to look up the FT 1000 just to see. Dave N8DC

Hi Svein LA3PU, Thank you for answering! 73' de Carlo I4HRH Il 19/04/2020 22:32, Svein Henriksen ha scritto:

I see, I misunderstood. I mainly use the ft1000mp for FT4 or FT8 so it does not change from time to time. Good luck finding a solution. 73 de LA3PU Svein

Hi Gary & Bob, Good to hear from you again Gary. Well, just done a few tests on CPU usage and frankly, there's no difference between when JTDX is refusing to switch to transmit and when its behaving

Brexit - what was that? No Bob, it hasn't crossed my mind. I've been too busy trying to find a supply of toilet paper in the supermarkets. It doesn't seem to help when I claim I'm in the most

Hi Svein LA3PU, Ok thanks, but I have already configured menu 8-6 and it works ok. I have to press the "USER" button by hand. I would like to do it automatically

Hello there. I haven’t noticed the ‘failed to transmit’ messages lately … but that’s mostly because I’m hardly using the cherry-picker, not the boring full-auto robot anyway. The

Go to menu 8-6 and set as follows. Menu: 8-6 Mode: PKT Disp Offset: 0 RX PLL: 1500 RX CAR: 453.450 TX PLL: 1500 TX CAR : 453.450 RTTY Offset : 0 EASY set : Off Then Select PKT and then

Try this: On the Logbook Entry Window, right click on ant entry field. Click SETUP | QSLING & QSO EXPORT | REMOVE EXTERNAL EXPORT QSL FLAGS. Is the Export QSO FOR EQSL PROCESSING checked? If so,

Hi Bob, Back in 1991, I worked 1A0KM on 20M and 40M. In 2019 I worked 1A0C on 20M. SET/SHOW AWARD CREDITS, there are 8 boxes and inside each box is DXCC_CW and IOTA. On the bottom is 1 check mark in

Hi Aki, I have; Mixed Mode , All Operators , LOTW Only , All Credits If I set it the way you have in your screen shot (All QSL Types), it shows 2031 Credits, but I should only have 1565. 73s Jim

Hi John N7TK, thanks for the reply. In the FT1000mp there is no PKT-USB mode, only PKT-LSB and PKT-FM. To configure the PKT-USB mode I have to use the option that the

What is your logging software John, as I don't think wsjt has anything to do with it. Tom GM4FDM

To my knowledge, there is no actual Logger32 "Manual" if you are thinking of a "User Manual" . There are three versions of the Logger32 Helpfiles, Logger32.chm, Logger32.docx and Logger32.pdf. Each

To my knowledge, there is no actual Logger32 "Manual" if you are thinking of a "User Manual" . There are three versions of the Logger32 Helpfiles, Logger32.chm, Logger32.docx and Logger32.pdf.

John, if you look in the \Logger32 directory, you will find a file called RadioPanel.INI This is the file where all your fancy Radio Control Panel macros are stored. If your macros work for an

Let’s try this again. Run Logger32 Across the top of the program are the words File Tools View Awards Setup Utilities and Help Click on Help A box of items drops down which will include the word