In pic1 I can not see Gridsquares. Are some of the EU gridsquares highlighted? The menu says Callsigns/gridsquares highlighted. SeventyThree(s).

HI Bob, Thanks for quick reply. Attached pic's 73's Deko

A picture please. SeventyThree(s).

Hallo Friends, Using last ver of Logger32 with WSJT-X or JTDX. Noticed tt bandmap of WSJT-X or JTDX did not make filtering properly i.e. : In "Config" of Bandmap i have checked "Block

Because it is not configured maybe (no com port assigned)? SeventyThree(s)

Bob, BTW: if I'll use one of the echo or slave ports, how I can keep running L32 (with WSJT) and Pan Adaptor w/o LPB2? Looks like I still need one more (virtual) port... 73, Ilya, 4Z1UF

Bob, why is mine Slave Port is grayed out? 73, Ilya, 4Z1UF

The original FIF-RS232C is not mandatory, any level converter will do. I used several when I had this radio, many years ago. Just my 2C, hi 73, Villi TF3VS

Pat, The FT-747GX manual, page 26, shows the following: Baud rate=4800 Start Bit=1 Data Bits=8 Stop Bits=2 Parity=None The FT-747GX has TTL data levels and used the Yaesu FIF-232C interface between

and stop bits=2 73 -- 73 de aki JA1NLX

Pat Try baudrate 4800 instead of 9600. 73 -- 73 de aki JA1NLX

Hello my name is pat. I've been working on logger32 with windows 10 for a week. But no luck getting to work. The program installed fine. I am trying to connect From my FT-747GX to my computer with

... and if you want to see Logger32 in a bowl of spaghetti, check out this configuration. SeventyThree(s). https://www.youtube.com/watch?v=w8dzvJu-wAs

Logprint is available at http://www.logger32.net/Utilities Jim – w5ifp-

Try https://www.logger32.net/utilities.html#.XkBSZuTsaCg SeventyThree(s).

I am a Logger32 user and have been using it since at least 1998 or 1999. I've never used the Logprint feature, but I just had a local amateur who knows I use Logger32 ask if I could help him with

WOW… And I just wanted to keep track of my QSO’s

In addition to the CAT serial port, there is an echo port and a slave port. The echo port simply sends (it doesn't listen ... like my 4th XYL) frequency to an external device - like

Mainly historical reasons...Now, after realizing that L32 can work with WSJT w/o additional ports- only the spare port for PanAdaptor...otherwise you'll tell me L32 can work with some Pan Adaptor

I didn't know what LPB2 was, so I Googled it. Now I think I know what it is, but I don't know why you need it. When you have just Logger32 and the radio, Logger32 controls the radio.