I'm still trying to figure out how to implement the PSK31 by "sharing" the Radio COM port used by my TS-850S w/IF-232C. Any ideas? 73, Steve -

I am not a expert on this even though I remember version 1.01, a DOS version. Steve, go thru the help area again, as alot of what your asking is in there. That is the ? on the top right hand corner of

I am fairly new to Logger and VERY new to digital (RTTY) QSOs. I have noticed that while such QSOs are OK on the Logbook Page, they do not appear anywhere when reviewing STATS or AWARDS. If I "edit"

Hello Ed, Very possibly you need to modify your Bandplan from the default that the program comes with. If so, go to help (?), then search, and type bandplan. Click on the subject for the details.

Hi fellow Logger users! I started using logger today, but important question is: HOW TO ENTER QSL-manager with the QSO ??!? ...so that the manager appears with the callsign at the

Ed -- Go to the CONFIGURE icon in the lower taskbar at the top of the screen. Open it and check the DIGITAL MODES box. It is likely blank. Add in RTTY and click OK. That should solve your

Thanks Rick -- that did it -- 73 Ed Go to the CONFIGURE icon in the lower taskbar at the top of the screen. Open it and check the DIGITAL MODES box. It is likely blank. Add in RTTY and click

Dear Hamloggers I'm using Logger since 2 days, therefore three short questions: 1. Whats a GOLIST and what can I do with together with Logger? I've seen in the help, that is is possible to use a

Sorry but I think this has been discussed but cannot find in messages. I have used Logger since ver6.0 but I am week when it comes to connecting rigs to computers. Can anyone help me with setting up

Zakanaka BETA is now at: http://www.chroniclenetworks.com/~dwm/Zakanaka.htm This BETA will only be available for 24 hours. Derek McClure de Ray, W8CNL. _______________

Hello, Many possibilities exist. I'm using (by me) simplest way - export from Excel as CSV file (commas separated value) than import it to YPLOG (www.nucleus.com/~field - shareware version is

try http://www.qsl.net/tentec/

Hi All, I am using logger since release 6.07 and then I upgraded step by step to 7.03. Unfortunately, in my DXCC countries list there are no ADIF numbers, so I wonder if some one can send me an

Dave I'm a bit confused? If you go to MAINTenance icon and open up the list and click on a DXCC country you will open it up and in the 2nd line it should list the ADIF number. It's below the white

Hi I'm a new user of a Logger. I like it very much. Looks for me better than Dx4Win. There is a one disadvantage of a Logger - lack of VHF bands logging. Can somebody tell me how to add this

Tom, You are using a European font that can cause problems for some people or at the least, a 15 minute download to display the "Pan-European" character set. Can you change to a normal font, just

Hi all..I have my AEA PAKRATT PK-232MBX multimode data controller for sale. It comes complete with original Operating Manual, all software and cables. It is in immaculate condition and I am asking 125

I'm using no long time Hamlogger: it's excellent log prg !!! But i've one problem with my kamplus tnc: i cannot use dual port both vhf / hf at same time. Can anybody help me ?? Thanks in advance de

Hi Fred Thanks for remarks concerning set of fonts used here. I will investigate this problem. Not everyone reports problem with the set of charakters I use. Best regards Tom SP5CCC

Antonio: I believe (others more knowledgeable please jump in here) that to use the Kam Plus in dual mode requires software that runs in KISS mode. Logger does not operate in this