Date   

Re: Operator issue

Jan <hamlogger@...>
 

Paul

Maybe the best solution for you is to find another log programme what suits you better.

73
Jan
9A/PA4JJ

Op 31-8-2022 om 8:57 schreef Paul F6EXV:
There might be an end to this when you answer the questions asked ...
Any chance of a development where no operator is required ?
72
Paul F6EXV

Le 30/08/2022 à 22:36, Bob a écrit :
Mon Dieu! Is there no end to this?

With the menu Show QSOs with F6EXV only checked  you can only see QSOs with F6EXV. With the menu unchecked, you can see them all. SeventyThree(s).
On 08/30/2022 4:08 PM Paul F6EXV <f6exv@...> wrote:


A right click in the Previous QSO window ONLY shows the following choices :
Show QSOs with F6EXV only
Show QSOs with station's home call
Show QSOs newest first, oldest last
Grid layout

There is NO "all operators" choice....

Le 30/08/2022 à 22:01, Paul F6EXV a écrit :
SUBJECT NOT CLOSED....

I have done that, and yes, I am no longer asked.
But only the last QSO shows (the one where I typed the "operator callsign")
How can I see all the QSOs ?

In ab earlier message, Bob said to turn on/off the "all operators" option in the Worked/confirmed" window. I have indicated that this choice DOES NOT APPEAR, contrary to what Bob said.
So what next ?

I have asked if an option to NOT haver any operrator callsign coud be envisaged... No reply...

Soixante treize

Le 30/08/2022 à 21:47, Bob a écrit :
I will try one more time ... Set the operator for the last QSO in the 3A/F6EXV logbook to 3A/F6EXV and the next time you open the 3A/F6EXV logbook the operator will default to 3A/F6EXV and you will not be prompted to enter an operator. Subject closed. SeventyThree(s).
On 08/30/2022 3:35 PM Paul F6EXV <f6exv@...> wrote:


I am more than happy to give you control of my computer, and you will see that, yes, I am asked to enter an operator callsign EVERY TIME I switch logbooks....

Le 30/08/2022 à 20:27, Bob a écrit :
I have responded to each of your messages. No, if you do as you are told, you do not have to enter an operator when changing logbooks. SeventyThree(s).

SeventyThree(s).
On 08/30/2022 2:22 PM Paul F6EXV <f6exv@...> wrote:


Bob, you do not read my messages....
I say I do not want any operator callsign, you say what does it show ?

I have asked 3 times why do I have to enter an operator callsign every time I switch logs... no reply...

Le 30/08/2022 à 20:12, Bob a écrit :
How about the last QSO in the 3A/F6EXV logbook. Who is the operator? SeventyThree(s).
On 08/30/2022 1:27 PM Paul F6EXV <f6exv@...> wrote:


I see the operator's callsign.
I DO NOT WANT ANY CALLSIGN TO SHOW THERE, I WANT AN EMPTY OPERATOR'S CALLSIN BOX

70 three

Le 30/08/2022 à 19:18, Bob a écrit :
Look in your 3A/F6EXV logbook. Look at the logbook page window. Change the setup to show the operator column. What do you see in that column? SeventyThree(s).
On 08/30/2022 1:02 PM Paul F6EXV <f6exv@...> wrote:


No, Bob, L32 will ask me to input an operayor's callsign EACH TIME I switch from one log to another....

Le 30/08/2022 à 19:00, Bob a écrit :
If you make a logbook called F6EXV and you set the operator to be F6EXV. Now if you make another logbook called 3A/F6EXV and you set the operator as 3A/F6EXV. Now make another logbook called 3A/PB8DX and you set the operator as 3A/PB8DX

Load you F6EXV QSOs in the F6EXV logbook. Load your 3A/F6EXV QSOs in 3A/F6EXV logbook. Load your 3A/PB8DX QSOs in your 3A/PB8DX logbook.

Switching to the F6EXV logbook automatically defaults to the operator F6EXV. Switching to the 3A/F6EXV logbook automatically defaults to the operator 3A/F6EXV. Switching to the 3A/PB8DX logbook automatically defaults to the 3A/F6EXV operator.

SeventyThree(s)/
On 08/30/2022 12:33 PM Paul F6EXV <f6exv@...> wrote:


Bob,
It looks like you did not understand my question, or maybe I did not phrase it correctly.
When changing from one log to another, I am asked to input an operator's callsign.
I just don't want to input any. If I do not, I do not have access to the log ; if I enter one, it is not remembered next time I switch to that log, and I am asked again.

With a right click, I do not have the option you are mentioning in the previous QSOs window. I only have "show QSO with F6EXV only"
The F6EXV log is for F6EXV, the 3A/F6EXV is for 3A/F6EXV, the 3A/PB8DX is for 3A/PB8DX, the 3A6M log is for 3A6M.
But I just DO NOT WANT any operator callsign devoted to any callsign
I do not care about awards (I have them all already).

Thanks + 73
Paul (no operator...)


Le 30/08/2022 à 14:13, Bob a écrit :
Right click on the Worked/Confirmed and Previous QSOs windows you will see the menus to turn on/off the 'all operators' optons.

At the bottom of each award window you will see an option turn on/off 'all operators'.

SeventyThree(s)

On 08/30/2022 6:02 AM Paul F6EXV <f6exv@...> wrote:

 
hello
I manage several callsigns within Logger32 (version 296)
I do not want any operator, for any of the callsigns.
How can I achieve that ?

Thanks + 73
Paul F6EXV












-- 
____________________________________________________
my dxspider clusters running on a raspberry pi zero:  
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388


Re: Operator issue

Paul F6EXV
 

There might be an end to this when you answer the questions asked ...
Any chance of a development where no operator is required ?
72
Paul F6EXV

Le 30/08/2022 à 22:36, Bob a écrit :

Mon Dieu! Is there no end to this?

With the menu Show QSOs with F6EXV only checked  you can only see QSOs with F6EXV. With the menu unchecked, you can see them all. SeventyThree(s).
On 08/30/2022 4:08 PM Paul F6EXV <f6exv@...> wrote:


A right click in the Previous QSO window ONLY shows the following choices :
Show QSOs with F6EXV only
Show QSOs with station's home call
Show QSOs newest first, oldest last
Grid layout

There is NO "all operators" choice....

Le 30/08/2022 à 22:01, Paul F6EXV a écrit :
SUBJECT NOT CLOSED....

I have done that, and yes, I am no longer asked.
But only the last QSO shows (the one where I typed the "operator callsign")
How can I see all the QSOs ?

In ab earlier message, Bob said to turn on/off the "all operators" option in the Worked/confirmed" window. I have indicated that this choice DOES NOT APPEAR, contrary to what Bob said.
So what next ?

I have asked if an option to NOT haver any operrator callsign coud be envisaged... No reply...

Soixante treize

Le 30/08/2022 à 21:47, Bob a écrit :
I will try one more time ... Set the operator for the last QSO in the 3A/F6EXV logbook to 3A/F6EXV and the next time you open the 3A/F6EXV logbook the operator will default to 3A/F6EXV and you will not be prompted to enter an operator. Subject closed. SeventyThree(s).
On 08/30/2022 3:35 PM Paul F6EXV <f6exv@...> wrote:


I am more than happy to give you control of my computer, and you will see that, yes, I am asked to enter an operator callsign EVERY TIME I switch logbooks....

Le 30/08/2022 à 20:27, Bob a écrit :
I have responded to each of your messages. No, if you do as you are told, you do not have to enter an operator when changing logbooks. SeventyThree(s).

SeventyThree(s).
On 08/30/2022 2:22 PM Paul F6EXV <f6exv@...> wrote:


Bob, you do not read my messages....
I say I do not want any operator callsign, you say what does it show ?

I have asked 3 times why do I have to enter an operator callsign every time I switch logs... no reply...

Le 30/08/2022 à 20:12, Bob a écrit :
How about the last QSO in the 3A/F6EXV logbook. Who is the operator? SeventyThree(s).
On 08/30/2022 1:27 PM Paul F6EXV <f6exv@...> wrote:


I see the operator's callsign.
I DO NOT WANT ANY CALLSIGN TO SHOW THERE, I WANT AN EMPTY OPERATOR'S CALLSIN BOX

70 three

Le 30/08/2022 à 19:18, Bob a écrit :
Look in your 3A/F6EXV logbook. Look at the logbook page window. Change the setup to show the operator column. What do you see in that column? SeventyThree(s).
On 08/30/2022 1:02 PM Paul F6EXV <f6exv@...> wrote:


No, Bob, L32 will ask me to input an operayor's callsign EACH TIME I switch from one log to another....

Le 30/08/2022 à 19:00, Bob a écrit :
If you make a logbook called F6EXV and you set the operator to be F6EXV. Now if you make another logbook called 3A/F6EXV and you set the operator as 3A/F6EXV. Now make another logbook called 3A/PB8DX and you set the operator as 3A/PB8DX

Load you F6EXV QSOs in the F6EXV logbook. Load your 3A/F6EXV QSOs in 3A/F6EXV logbook. Load your 3A/PB8DX QSOs in your 3A/PB8DX logbook.

Switching to the F6EXV logbook automatically defaults to the operator F6EXV. Switching to the 3A/F6EXV logbook automatically defaults to the operator 3A/F6EXV. Switching to the 3A/PB8DX logbook automatically defaults to the 3A/F6EXV operator.

SeventyThree(s)/
On 08/30/2022 12:33 PM Paul F6EXV <f6exv@...> wrote:


Bob,
It looks like you did not understand my question, or maybe I did not phrase it correctly.
When changing from one log to another, I am asked to input an operator's callsign.
I just don't want to input any. If I do not, I do not have access to the log ; if I enter one, it is not remembered next time I switch to that log, and I am asked again.

With a right click, I do not have the option you are mentioning in the previous QSOs window. I only have "show QSO with F6EXV only"
The F6EXV log is for F6EXV, the 3A/F6EXV is for 3A/F6EXV, the 3A/PB8DX is for 3A/PB8DX, the 3A6M log is for 3A6M.
But I just DO NOT WANT any operator callsign devoted to any callsign
I do not care about awards (I have them all already).

Thanks + 73
Paul (no operator...)


Le 30/08/2022 à 14:13, Bob a écrit :
Right click on the Worked/Confirmed and Previous QSOs windows you will see the menus to turn on/off the 'all operators' optons.

At the bottom of each award window you will see an option turn on/off 'all operators'.

SeventyThree(s)

On 08/30/2022 6:02 AM Paul F6EXV <f6exv@...> wrote:

 
hello
I manage several callsigns within Logger32 (version 296)
I do not want any operator, for any of the callsigns.
How can I achieve that ?

Thanks + 73
Paul F6EXV












Re: Operator

Paul F6EXV
 

The answer is yes.
Where is the solution ?

Le 30/08/2022 à 23:00, Ken McVie a écrit :

Paul, there is something wrong at your end! I don't EVER have to enter a callsign when changing logs.
73 Ken 
ZL4NR 

On Wed, 31 Aug 2022, 06:22 Paul F6EXV, <f6exv@...> wrote:
Bob, you do not read my messages....
I say I do not want any operator callsign, you say what does it show ?

I have asked 3 times why do I have to enter an operator callsign every time I switch logs... no reply...

Le 30/08/2022 à 20:12, Bob a écrit :
How about the last QSO in the 3A/F6EXV logbook. Who is the operator? SeventyThree(s).
On 08/30/2022 1:27 PM Paul F6EXV <f6exv@...> wrote:


I see the operator's callsign.
I DO NOT WANT ANY CALLSIGN TO SHOW THERE, I WANT AN EMPTY OPERATOR'S CALLSIN BOX

70 three

Le 30/08/2022 à 19:18, Bob a écrit :
Look in your 3A/F6EXV logbook. Look at the logbook page window. Change the setup to show the operator column. What do you see in that column? SeventyThree(s).
On 08/30/2022 1:02 PM Paul F6EXV <f6exv@...> wrote:


No, Bob, L32 will ask me to input an operayor's callsign EACH TIME I switch from one log to another....

Le 30/08/2022 à 19:00, Bob a écrit :
If you make a logbook called F6EXV and you set the operator to be F6EXV. Now if you make another logbook called 3A/F6EXV and you set the operator as 3A/F6EXV. Now make another logbook called 3A/PB8DX and you set the operator as 3A/PB8DX

Load you F6EXV QSOs in the F6EXV logbook. Load your 3A/F6EXV QSOs in 3A/F6EXV logbook. Load your 3A/PB8DX QSOs in your 3A/PB8DX logbook.

Switching to the F6EXV logbook automatically defaults to the operator F6EXV. Switching to the 3A/F6EXV logbook automatically defaults to the operator 3A/F6EXV. Switching to the 3A/PB8DX logbook automatically defaults to the 3A/F6EXV operator.

SeventyThree(s)/
On 08/30/2022 12:33 PM Paul F6EXV <f6exv@...> wrote:


Bob,
It looks like you did not understand my question, or maybe I did not phrase it correctly.
When changing from one log to another, I am asked to input an operator's callsign.
I just don't want to input any. If I do not, I do not have access to the log ; if I enter one, it is not remembered next time I switch to that log, and I am asked again.

With a right click, I do not have the option you are mentioning in the previous QSOs window. I only have "show QSO with F6EXV only"
The F6EXV log is for F6EXV, the 3A/F6EXV is for 3A/F6EXV, the 3A/PB8DX is for 3A/PB8DX, the 3A6M log is for 3A6M.
But I just DO NOT WANT any operator callsign devoted to any callsign
I do not care about awards (I have them all already).

Thanks + 73
Paul (no operator...)


Le 30/08/2022 à 14:13, Bob a écrit :
Right click on the Worked/Confirmed and Previous QSOs windows you will see the menus to turn on/off the 'all operators' optons.

At the bottom of each award window you will see an option turn on/off 'all operators'.

SeventyThree(s)

On 08/30/2022 6:02 AM Paul F6EXV <f6exv@...> wrote:

 
hello
I manage several callsigns within Logger32 (version 296)
I do not want any operator, for any of the callsigns.
How can I achieve that ?

Thanks + 73
Paul F6EXV









Re: Operator

Ken McVie
 

Paul, there is something wrong at your end! I don't EVER have to enter a callsign when changing logs.
73 Ken 
ZL4NR 

On Wed, 31 Aug 2022, 06:22 Paul F6EXV, <f6exv@...> wrote:
Bob, you do not read my messages....
I say I do not want any operator callsign, you say what does it show ?

I have asked 3 times why do I have to enter an operator callsign every time I switch logs... no reply...

Le 30/08/2022 à 20:12, Bob a écrit :
How about the last QSO in the 3A/F6EXV logbook. Who is the operator? SeventyThree(s).
On 08/30/2022 1:27 PM Paul F6EXV <f6exv@...> wrote:


I see the operator's callsign.
I DO NOT WANT ANY CALLSIGN TO SHOW THERE, I WANT AN EMPTY OPERATOR'S CALLSIN BOX

70 three

Le 30/08/2022 à 19:18, Bob a écrit :
Look in your 3A/F6EXV logbook. Look at the logbook page window. Change the setup to show the operator column. What do you see in that column? SeventyThree(s).
On 08/30/2022 1:02 PM Paul F6EXV <f6exv@...> wrote:


No, Bob, L32 will ask me to input an operayor's callsign EACH TIME I switch from one log to another....

Le 30/08/2022 à 19:00, Bob a écrit :
If you make a logbook called F6EXV and you set the operator to be F6EXV. Now if you make another logbook called 3A/F6EXV and you set the operator as 3A/F6EXV. Now make another logbook called 3A/PB8DX and you set the operator as 3A/PB8DX

Load you F6EXV QSOs in the F6EXV logbook. Load your 3A/F6EXV QSOs in 3A/F6EXV logbook. Load your 3A/PB8DX QSOs in your 3A/PB8DX logbook.

Switching to the F6EXV logbook automatically defaults to the operator F6EXV. Switching to the 3A/F6EXV logbook automatically defaults to the operator 3A/F6EXV. Switching to the 3A/PB8DX logbook automatically defaults to the 3A/F6EXV operator.

SeventyThree(s)/
On 08/30/2022 12:33 PM Paul F6EXV <f6exv@...> wrote:


Bob,
It looks like you did not understand my question, or maybe I did not phrase it correctly.
When changing from one log to another, I am asked to input an operator's callsign.
I just don't want to input any. If I do not, I do not have access to the log ; if I enter one, it is not remembered next time I switch to that log, and I am asked again.

With a right click, I do not have the option you are mentioning in the previous QSOs window. I only have "show QSO with F6EXV only"
The F6EXV log is for F6EXV, the 3A/F6EXV is for 3A/F6EXV, the 3A/PB8DX is for 3A/PB8DX, the 3A6M log is for 3A6M.
But I just DO NOT WANT any operator callsign devoted to any callsign
I do not care about awards (I have them all already).

Thanks + 73
Paul (no operator...)


Le 30/08/2022 à 14:13, Bob a écrit :
Right click on the Worked/Confirmed and Previous QSOs windows you will see the menus to turn on/off the 'all operators' optons.

At the bottom of each award window you will see an option turn on/off 'all operators'.

SeventyThree(s)

On 08/30/2022 6:02 AM Paul F6EXV <f6exv@...> wrote:

 
hello
I manage several callsigns within Logger32 (version 296)
I do not want any operator, for any of the callsigns.
How can I achieve that ?

Thanks + 73
Paul F6EXV








Re: Operator issue

John Munton - G7SSE
 

Paul

Un-ticking the options shown below 'should' allow to to see all previous QSO's and worked / confirmed status etc. for all the QSO's in the currently open logbook, regardless of the operator.

Previous QSO's Window menu;



Worked/Confirmed Window menu;




This is all in the Help Guide BTW ;-)

73,
John - G7SSE


Re: Operator issue

Bob
 

Mon Dieu! Is there no end to this?

With the menu Show QSOs with F6EXV only checked  you can only see QSOs with F6EXV. With the menu unchecked, you can see them all. SeventyThree(s).

On 08/30/2022 4:08 PM Paul F6EXV <f6exv@...> wrote:


A right click in the Previous QSO window ONLY shows the following choices :
Show QSOs with F6EXV only
Show QSOs with station's home call
Show QSOs newest first, oldest last
Grid layout

There is NO "all operators" choice....

Le 30/08/2022 à 22:01, Paul F6EXV a écrit :
SUBJECT NOT CLOSED....

I have done that, and yes, I am no longer asked.
But only the last QSO shows (the one where I typed the "operator callsign")
How can I see all the QSOs ?

In ab earlier message, Bob said to turn on/off the "all operators" option in the Worked/confirmed" window. I have indicated that this choice DOES NOT APPEAR, contrary to what Bob said.
So what next ?

I have asked if an option to NOT haver any operrator callsign coud be envisaged... No reply...

Soixante treize

Le 30/08/2022 à 21:47, Bob a écrit :
I will try one more time ... Set the operator for the last QSO in the 3A/F6EXV logbook to 3A/F6EXV and the next time you open the 3A/F6EXV logbook the operator will default to 3A/F6EXV and you will not be prompted to enter an operator. Subject closed. SeventyThree(s).
On 08/30/2022 3:35 PM Paul F6EXV <f6exv@...> wrote:


I am more than happy to give you control of my computer, and you will see that, yes, I am asked to enter an operator callsign EVERY TIME I switch logbooks....

Le 30/08/2022 à 20:27, Bob a écrit :
I have responded to each of your messages. No, if you do as you are told, you do not have to enter an operator when changing logbooks. SeventyThree(s).

SeventyThree(s).
On 08/30/2022 2:22 PM Paul F6EXV <f6exv@...> wrote:


Bob, you do not read my messages....
I say I do not want any operator callsign, you say what does it show ?

I have asked 3 times why do I have to enter an operator callsign every time I switch logs... no reply...

Le 30/08/2022 à 20:12, Bob a écrit :
How about the last QSO in the 3A/F6EXV logbook. Who is the operator? SeventyThree(s).
On 08/30/2022 1:27 PM Paul F6EXV <f6exv@...> wrote:


I see the operator's callsign.
I DO NOT WANT ANY CALLSIGN TO SHOW THERE, I WANT AN EMPTY OPERATOR'S CALLSIN BOX

70 three

Le 30/08/2022 à 19:18, Bob a écrit :
Look in your 3A/F6EXV logbook. Look at the logbook page window. Change the setup to show the operator column. What do you see in that column? SeventyThree(s).
On 08/30/2022 1:02 PM Paul F6EXV <f6exv@...> wrote:


No, Bob, L32 will ask me to input an operayor's callsign EACH TIME I switch from one log to another....

Le 30/08/2022 à 19:00, Bob a écrit :
If you make a logbook called F6EXV and you set the operator to be F6EXV. Now if you make another logbook called 3A/F6EXV and you set the operator as 3A/F6EXV. Now make another logbook called 3A/PB8DX and you set the operator as 3A/PB8DX

Load you F6EXV QSOs in the F6EXV logbook. Load your 3A/F6EXV QSOs in 3A/F6EXV logbook. Load your 3A/PB8DX QSOs in your 3A/PB8DX logbook.

Switching to the F6EXV logbook automatically defaults to the operator F6EXV. Switching to the 3A/F6EXV logbook automatically defaults to the operator 3A/F6EXV. Switching to the 3A/PB8DX logbook automatically defaults to the 3A/F6EXV operator.

SeventyThree(s)/
On 08/30/2022 12:33 PM Paul F6EXV <f6exv@...> wrote:


Bob,
It looks like you did not understand my question, or maybe I did not phrase it correctly.
When changing from one log to another, I am asked to input an operator's callsign.
I just don't want to input any. If I do not, I do not have access to the log ; if I enter one, it is not remembered next time I switch to that log, and I am asked again.

With a right click, I do not have the option you are mentioning in the previous QSOs window. I only have "show QSO with F6EXV only"
The F6EXV log is for F6EXV, the 3A/F6EXV is for 3A/F6EXV, the 3A/PB8DX is for 3A/PB8DX, the 3A6M log is for 3A6M.
But I just DO NOT WANT any operator callsign devoted to any callsign
I do not care about awards (I have them all already).

Thanks + 73
Paul (no operator...)


Le 30/08/2022 à 14:13, Bob a écrit :
Right click on the Worked/Confirmed and Previous QSOs windows you will see the menus to turn on/off the 'all operators' optons.

At the bottom of each award window you will see an option turn on/off 'all operators'.

SeventyThree(s)

On 08/30/2022 6:02 AM Paul F6EXV <f6exv@...> wrote:

 
hello
I manage several callsigns within Logger32 (version 296)
I do not want any operator, for any of the callsigns.
How can I achieve that ?

Thanks + 73
Paul F6EXV











Re: Operator issue

Paul F6EXV
 

A right click in the Previous QSO window ONLY shows the following choices :
Show QSOs with F6EXV only
Show QSOs with station's home call
Show QSOs newest first, oldest last
Grid layout

There is NO "all operators" choice....

Le 30/08/2022 à 22:01, Paul F6EXV a écrit :

SUBJECT NOT CLOSED....

I have done that, and yes, I am no longer asked.
But only the last QSO shows (the one where I typed the "operator callsign")
How can I see all the QSOs ?

In ab earlier message, Bob said to turn on/off the "all operators" option in the Worked/confirmed" window. I have indicated that this choice DOES NOT APPEAR, contrary to what Bob said.
So what next ?

I have asked if an option to NOT haver any operrator callsign coud be envisaged... No reply...

Soixante treize

Le 30/08/2022 à 21:47, Bob a écrit :
I will try one more time ... Set the operator for the last QSO in the 3A/F6EXV logbook to 3A/F6EXV and the next time you open the 3A/F6EXV logbook the operator will default to 3A/F6EXV and you will not be prompted to enter an operator. Subject closed. SeventyThree(s).
On 08/30/2022 3:35 PM Paul F6EXV <f6exv@...> wrote:


I am more than happy to give you control of my computer, and you will see that, yes, I am asked to enter an operator callsign EVERY TIME I switch logbooks....

Le 30/08/2022 à 20:27, Bob a écrit :
I have responded to each of your messages. No, if you do as you are told, you do not have to enter an operator when changing logbooks. SeventyThree(s).

SeventyThree(s).
On 08/30/2022 2:22 PM Paul F6EXV <f6exv@...> wrote:


Bob, you do not read my messages....
I say I do not want any operator callsign, you say what does it show ?

I have asked 3 times why do I have to enter an operator callsign every time I switch logs... no reply...

Le 30/08/2022 à 20:12, Bob a écrit :
How about the last QSO in the 3A/F6EXV logbook. Who is the operator? SeventyThree(s).
On 08/30/2022 1:27 PM Paul F6EXV <f6exv@...> wrote:


I see the operator's callsign.
I DO NOT WANT ANY CALLSIGN TO SHOW THERE, I WANT AN EMPTY OPERATOR'S CALLSIN BOX

70 three

Le 30/08/2022 à 19:18, Bob a écrit :
Look in your 3A/F6EXV logbook. Look at the logbook page window. Change the setup to show the operator column. What do you see in that column? SeventyThree(s).
On 08/30/2022 1:02 PM Paul F6EXV <f6exv@...> wrote:


No, Bob, L32 will ask me to input an operayor's callsign EACH TIME I switch from one log to another....

Le 30/08/2022 à 19:00, Bob a écrit :
If you make a logbook called F6EXV and you set the operator to be F6EXV. Now if you make another logbook called 3A/F6EXV and you set the operator as 3A/F6EXV. Now make another logbook called 3A/PB8DX and you set the operator as 3A/PB8DX

Load you F6EXV QSOs in the F6EXV logbook. Load your 3A/F6EXV QSOs in 3A/F6EXV logbook. Load your 3A/PB8DX QSOs in your 3A/PB8DX logbook.

Switching to the F6EXV logbook automatically defaults to the operator F6EXV. Switching to the 3A/F6EXV logbook automatically defaults to the operator 3A/F6EXV. Switching to the 3A/PB8DX logbook automatically defaults to the 3A/F6EXV operator.

SeventyThree(s)/
On 08/30/2022 12:33 PM Paul F6EXV <f6exv@...> wrote:


Bob,
It looks like you did not understand my question, or maybe I did not phrase it correctly.
When changing from one log to another, I am asked to input an operator's callsign.
I just don't want to input any. If I do not, I do not have access to the log ; if I enter one, it is not remembered next time I switch to that log, and I am asked again.

With a right click, I do not have the option you are mentioning in the previous QSOs window. I only have "show QSO with F6EXV only"
The F6EXV log is for F6EXV, the 3A/F6EXV is for 3A/F6EXV, the 3A/PB8DX is for 3A/PB8DX, the 3A6M log is for 3A6M.
But I just DO NOT WANT any operator callsign devoted to any callsign
I do not care about awards (I have them all already).

Thanks + 73
Paul (no operator...)


Le 30/08/2022 à 14:13, Bob a écrit :
Right click on the Worked/Confirmed and Previous QSOs windows you will see the menus to turn on/off the 'all operators' optons.

At the bottom of each award window you will see an option turn on/off 'all operators'.

SeventyThree(s)

On 08/30/2022 6:02 AM Paul F6EXV <f6exv@...> wrote:

 
hello
I manage several callsigns within Logger32 (version 296)
I do not want any operator, for any of the callsigns.
How can I achieve that ?

Thanks + 73
Paul F6EXV











Operator issue

Paul F6EXV
 

SUBJECT NOT CLOSED....

I have done that, and yes, I am no longer asked.
But only the last QSO shows (the one where I typed the "operator callsign")
How can I see all the QSOs ?

In ab earlier message, Bob said to turn on/off the "all operators" option in the Worked/confirmed" window. I have indicated that this choice DOES NOT APPEAR, contrary to what Bob said.
So what next ?

I have asked if an option to NOT haver any operrator callsign coud be envisaged... No reply...

Soixante treize

Le 30/08/2022 à 21:47, Bob a écrit :

I will try one more time ... Set the operator for the last QSO in the 3A/F6EXV logbook to 3A/F6EXV and the next time you open the 3A/F6EXV logbook the operator will default to 3A/F6EXV and you will not be prompted to enter an operator. Subject closed. SeventyThree(s).
On 08/30/2022 3:35 PM Paul F6EXV <f6exv@...> wrote:


I am more than happy to give you control of my computer, and you will see that, yes, I am asked to enter an operator callsign EVERY TIME I switch logbooks....

Le 30/08/2022 à 20:27, Bob a écrit :
I have responded to each of your messages. No, if you do as you are told, you do not have to enter an operator when changing logbooks. SeventyThree(s).

SeventyThree(s).
On 08/30/2022 2:22 PM Paul F6EXV <f6exv@...> wrote:


Bob, you do not read my messages....
I say I do not want any operator callsign, you say what does it show ?

I have asked 3 times why do I have to enter an operator callsign every time I switch logs... no reply...

Le 30/08/2022 à 20:12, Bob a écrit :
How about the last QSO in the 3A/F6EXV logbook. Who is the operator? SeventyThree(s).
On 08/30/2022 1:27 PM Paul F6EXV <f6exv@...> wrote:


I see the operator's callsign.
I DO NOT WANT ANY CALLSIGN TO SHOW THERE, I WANT AN EMPTY OPERATOR'S CALLSIN BOX

70 three

Le 30/08/2022 à 19:18, Bob a écrit :
Look in your 3A/F6EXV logbook. Look at the logbook page window. Change the setup to show the operator column. What do you see in that column? SeventyThree(s).
On 08/30/2022 1:02 PM Paul F6EXV <f6exv@...> wrote:


No, Bob, L32 will ask me to input an operayor's callsign EACH TIME I switch from one log to another....

Le 30/08/2022 à 19:00, Bob a écrit :
If you make a logbook called F6EXV and you set the operator to be F6EXV. Now if you make another logbook called 3A/F6EXV and you set the operator as 3A/F6EXV. Now make another logbook called 3A/PB8DX and you set the operator as 3A/PB8DX

Load you F6EXV QSOs in the F6EXV logbook. Load your 3A/F6EXV QSOs in 3A/F6EXV logbook. Load your 3A/PB8DX QSOs in your 3A/PB8DX logbook.

Switching to the F6EXV logbook automatically defaults to the operator F6EXV. Switching to the 3A/F6EXV logbook automatically defaults to the operator 3A/F6EXV. Switching to the 3A/PB8DX logbook automatically defaults to the 3A/F6EXV operator.

SeventyThree(s)/
On 08/30/2022 12:33 PM Paul F6EXV <f6exv@...> wrote:


Bob,
It looks like you did not understand my question, or maybe I did not phrase it correctly.
When changing from one log to another, I am asked to input an operator's callsign.
I just don't want to input any. If I do not, I do not have access to the log ; if I enter one, it is not remembered next time I switch to that log, and I am asked again.

With a right click, I do not have the option you are mentioning in the previous QSOs window. I only have "show QSO with F6EXV only"
The F6EXV log is for F6EXV, the 3A/F6EXV is for 3A/F6EXV, the 3A/PB8DX is for 3A/PB8DX, the 3A6M log is for 3A6M.
But I just DO NOT WANT any operator callsign devoted to any callsign
I do not care about awards (I have them all already).

Thanks + 73
Paul (no operator...)


Le 30/08/2022 à 14:13, Bob a écrit :
Right click on the Worked/Confirmed and Previous QSOs windows you will see the menus to turn on/off the 'all operators' optons.

At the bottom of each award window you will see an option turn on/off 'all operators'.

SeventyThree(s)

On 08/30/2022 6:02 AM Paul F6EXV <f6exv@...> wrote:

 
hello
I manage several callsigns within Logger32 (version 296)
I do not want any operator, for any of the callsigns.
How can I achieve that ?

Thanks + 73
Paul F6EXV










Re: Operator

Bob
 

I will try one more time ... Set the operator for the last QSO in the 3A/F6EXV logbook to 3A/F6EXV and the next time you open the 3A/F6EXV logbook the operator will default to 3A/F6EXV and you will not be prompted to enter an operator. Subject closed. SeventyThree(s).

On 08/30/2022 3:35 PM Paul F6EXV <f6exv@...> wrote:


I am more than happy to give you control of my computer, and you will see that, yes, I am asked to enter an operator callsign EVERY TIME I switch logbooks....

Le 30/08/2022 à 20:27, Bob a écrit :
I have responded to each of your messages. No, if you do as you are told, you do not have to enter an operator when changing logbooks. SeventyThree(s).

SeventyThree(s).
On 08/30/2022 2:22 PM Paul F6EXV <f6exv@...> wrote:


Bob, you do not read my messages....
I say I do not want any operator callsign, you say what does it show ?

I have asked 3 times why do I have to enter an operator callsign every time I switch logs... no reply...

Le 30/08/2022 à 20:12, Bob a écrit :
How about the last QSO in the 3A/F6EXV logbook. Who is the operator? SeventyThree(s).
On 08/30/2022 1:27 PM Paul F6EXV <f6exv@...> wrote:


I see the operator's callsign.
I DO NOT WANT ANY CALLSIGN TO SHOW THERE, I WANT AN EMPTY OPERATOR'S CALLSIN BOX

70 three

Le 30/08/2022 à 19:18, Bob a écrit :
Look in your 3A/F6EXV logbook. Look at the logbook page window. Change the setup to show the operator column. What do you see in that column? SeventyThree(s).
On 08/30/2022 1:02 PM Paul F6EXV <f6exv@...> wrote:


No, Bob, L32 will ask me to input an operayor's callsign EACH TIME I switch from one log to another....

Le 30/08/2022 à 19:00, Bob a écrit :
If you make a logbook called F6EXV and you set the operator to be F6EXV. Now if you make another logbook called 3A/F6EXV and you set the operator as 3A/F6EXV. Now make another logbook called 3A/PB8DX and you set the operator as 3A/PB8DX

Load you F6EXV QSOs in the F6EXV logbook. Load your 3A/F6EXV QSOs in 3A/F6EXV logbook. Load your 3A/PB8DX QSOs in your 3A/PB8DX logbook.

Switching to the F6EXV logbook automatically defaults to the operator F6EXV. Switching to the 3A/F6EXV logbook automatically defaults to the operator 3A/F6EXV. Switching to the 3A/PB8DX logbook automatically defaults to the 3A/F6EXV operator.

SeventyThree(s)/
On 08/30/2022 12:33 PM Paul F6EXV <f6exv@...> wrote:


Bob,
It looks like you did not understand my question, or maybe I did not phrase it correctly.
When changing from one log to another, I am asked to input an operator's callsign.
I just don't want to input any. If I do not, I do not have access to the log ; if I enter one, it is not remembered next time I switch to that log, and I am asked again.

With a right click, I do not have the option you are mentioning in the previous QSOs window. I only have "show QSO with F6EXV only"
The F6EXV log is for F6EXV, the 3A/F6EXV is for 3A/F6EXV, the 3A/PB8DX is for 3A/PB8DX, the 3A6M log is for 3A6M.
But I just DO NOT WANT any operator callsign devoted to any callsign
I do not care about awards (I have them all already).

Thanks + 73
Paul (no operator...)


Le 30/08/2022 à 14:13, Bob a écrit :
Right click on the Worked/Confirmed and Previous QSOs windows you will see the menus to turn on/off the 'all operators' optons.

At the bottom of each award window you will see an option turn on/off 'all operators'.

SeventyThree(s)

On 08/30/2022 6:02 AM Paul F6EXV <f6exv@...> wrote:

 
hello
I manage several callsigns within Logger32 (version 296)
I do not want any operator, for any of the callsigns.
How can I achieve that ?

Thanks + 73
Paul F6EXV









Re: Operator

Paul F6EXV
 

I am more than happy to give you control of my computer, and you will see that, yes, I am asked to enter an operator callsign EVERY TIME I switch logbooks....

Le 30/08/2022 à 20:27, Bob a écrit :

I have responded to each of your messages. No, if you do as you are told, you do not have to enter an operator when changing logbooks. SeventyThree(s).

SeventyThree(s).
On 08/30/2022 2:22 PM Paul F6EXV <f6exv@...> wrote:


Bob, you do not read my messages....
I say I do not want any operator callsign, you say what does it show ?

I have asked 3 times why do I have to enter an operator callsign every time I switch logs... no reply...

Le 30/08/2022 à 20:12, Bob a écrit :
How about the last QSO in the 3A/F6EXV logbook. Who is the operator? SeventyThree(s).
On 08/30/2022 1:27 PM Paul F6EXV <f6exv@...> wrote:


I see the operator's callsign.
I DO NOT WANT ANY CALLSIGN TO SHOW THERE, I WANT AN EMPTY OPERATOR'S CALLSIN BOX

70 three

Le 30/08/2022 à 19:18, Bob a écrit :
Look in your 3A/F6EXV logbook. Look at the logbook page window. Change the setup to show the operator column. What do you see in that column? SeventyThree(s).
On 08/30/2022 1:02 PM Paul F6EXV <f6exv@...> wrote:


No, Bob, L32 will ask me to input an operayor's callsign EACH TIME I switch from one log to another....

Le 30/08/2022 à 19:00, Bob a écrit :
If you make a logbook called F6EXV and you set the operator to be F6EXV. Now if you make another logbook called 3A/F6EXV and you set the operator as 3A/F6EXV. Now make another logbook called 3A/PB8DX and you set the operator as 3A/PB8DX

Load you F6EXV QSOs in the F6EXV logbook. Load your 3A/F6EXV QSOs in 3A/F6EXV logbook. Load your 3A/PB8DX QSOs in your 3A/PB8DX logbook.

Switching to the F6EXV logbook automatically defaults to the operator F6EXV. Switching to the 3A/F6EXV logbook automatically defaults to the operator 3A/F6EXV. Switching to the 3A/PB8DX logbook automatically defaults to the 3A/F6EXV operator.

SeventyThree(s)/
On 08/30/2022 12:33 PM Paul F6EXV <f6exv@...> wrote:


Bob,
It looks like you did not understand my question, or maybe I did not phrase it correctly.
When changing from one log to another, I am asked to input an operator's callsign.
I just don't want to input any. If I do not, I do not have access to the log ; if I enter one, it is not remembered next time I switch to that log, and I am asked again.

With a right click, I do not have the option you are mentioning in the previous QSOs window. I only have "show QSO with F6EXV only"
The F6EXV log is for F6EXV, the 3A/F6EXV is for 3A/F6EXV, the 3A/PB8DX is for 3A/PB8DX, the 3A6M log is for 3A6M.
But I just DO NOT WANT any operator callsign devoted to any callsign
I do not care about awards (I have them all already).

Thanks + 73
Paul (no operator...)


Le 30/08/2022 à 14:13, Bob a écrit :
Right click on the Worked/Confirmed and Previous QSOs windows you will see the menus to turn on/off the 'all operators' optons.

At the bottom of each award window you will see an option turn on/off 'all operators'.

SeventyThree(s)

On 08/30/2022 6:02 AM Paul F6EXV <f6exv@...> wrote:

 
hello
I manage several callsigns within Logger32 (version 296)
I do not want any operator, for any of the callsigns.
How can I achieve that ?

Thanks + 73
Paul F6EXV









Re: Operator

Paul F6EXV
 

How can I say this ? I AM ASKED TO ENTER AN OPERATOR CALLSIGN EVERY TIME I SWITCH LOGBOOKS.
Is this clear enough ??????

Le 30/08/2022 à 21:15, John Munton - G7SSE a écrit :

Paul

You do not have to enter it, Logger32 will do it for you based on the default operator for that logbook when you switch logbooks.

The operator field in the images below automatically fills with the correct call when I switch between these logbooks;
 
You cannot however delete it and leave it blank.
(is that what I think you're asking..??)

John - G7SSE


Re: Operator

John Munton - G7SSE
 

Paul

You do not have to enter it, Logger32 will do it for you based on the default operator for that logbook when you switch logbooks.

The operator field in the images below automatically fills with the correct call when I switch between these logbooks;
 
You cannot however delete it and leave it blank.
(is that what I think you're asking..??)

John - G7SSE


Yaesu YS-60 Power/SWR meter

G4GIR
 

This maybe a long shot, but you never know.
 
Does anyone use a Yaesu YS-60 Power/SWR meter? If so do you know if there is or have a calibration procedure for it, I've trawled the net to no avail. Just the usual operating instructions. Problem is a discrepancy between the ranges for the same input power.
 
Cheers
 
Ian G4GIR
 
 
 
 


Re: Operator

Bob
 

I have responded to each of your messages. No, if you do as you are told, you do not have to enter an operator when changing logbooks. SeventyThree(s).

SeventyThree(s).

On 08/30/2022 2:22 PM Paul F6EXV <f6exv@...> wrote:


Bob, you do not read my messages....
I say I do not want any operator callsign, you say what does it show ?

I have asked 3 times why do I have to enter an operator callsign every time I switch logs... no reply...

Le 30/08/2022 à 20:12, Bob a écrit :
How about the last QSO in the 3A/F6EXV logbook. Who is the operator? SeventyThree(s).
On 08/30/2022 1:27 PM Paul F6EXV <f6exv@...> wrote:


I see the operator's callsign.
I DO NOT WANT ANY CALLSIGN TO SHOW THERE, I WANT AN EMPTY OPERATOR'S CALLSIN BOX

70 three

Le 30/08/2022 à 19:18, Bob a écrit :
Look in your 3A/F6EXV logbook. Look at the logbook page window. Change the setup to show the operator column. What do you see in that column? SeventyThree(s).
On 08/30/2022 1:02 PM Paul F6EXV <f6exv@...> wrote:


No, Bob, L32 will ask me to input an operayor's callsign EACH TIME I switch from one log to another....

Le 30/08/2022 à 19:00, Bob a écrit :
If you make a logbook called F6EXV and you set the operator to be F6EXV. Now if you make another logbook called 3A/F6EXV and you set the operator as 3A/F6EXV. Now make another logbook called 3A/PB8DX and you set the operator as 3A/PB8DX

Load you F6EXV QSOs in the F6EXV logbook. Load your 3A/F6EXV QSOs in 3A/F6EXV logbook. Load your 3A/PB8DX QSOs in your 3A/PB8DX logbook.

Switching to the F6EXV logbook automatically defaults to the operator F6EXV. Switching to the 3A/F6EXV logbook automatically defaults to the operator 3A/F6EXV. Switching to the 3A/PB8DX logbook automatically defaults to the 3A/F6EXV operator.

SeventyThree(s)/
On 08/30/2022 12:33 PM Paul F6EXV <f6exv@...> wrote:


Bob,
It looks like you did not understand my question, or maybe I did not phrase it correctly.
When changing from one log to another, I am asked to input an operator's callsign.
I just don't want to input any. If I do not, I do not have access to the log ; if I enter one, it is not remembered next time I switch to that log, and I am asked again.

With a right click, I do not have the option you are mentioning in the previous QSOs window. I only have "show QSO with F6EXV only"
The F6EXV log is for F6EXV, the 3A/F6EXV is for 3A/F6EXV, the 3A/PB8DX is for 3A/PB8DX, the 3A6M log is for 3A6M.
But I just DO NOT WANT any operator callsign devoted to any callsign
I do not care about awards (I have them all already).

Thanks + 73
Paul (no operator...)


Le 30/08/2022 à 14:13, Bob a écrit :
Right click on the Worked/Confirmed and Previous QSOs windows you will see the menus to turn on/off the 'all operators' optons.

At the bottom of each award window you will see an option turn on/off 'all operators'.

SeventyThree(s)

On 08/30/2022 6:02 AM Paul F6EXV <f6exv@...> wrote:

 
hello
I manage several callsigns within Logger32 (version 296)
I do not want any operator, for any of the callsigns.
How can I achieve that ?

Thanks + 73
Paul F6EXV








Re: Operator

Paul F6EXV
 

Bob, you do not read my messages....
I say I do not want any operator callsign, you say what does it show ?

I have asked 3 times why do I have to enter an operator callsign every time I switch logs... no reply...

Le 30/08/2022 à 20:12, Bob a écrit :

How about the last QSO in the 3A/F6EXV logbook. Who is the operator? SeventyThree(s).
On 08/30/2022 1:27 PM Paul F6EXV <f6exv@...> wrote:


I see the operator's callsign.
I DO NOT WANT ANY CALLSIGN TO SHOW THERE, I WANT AN EMPTY OPERATOR'S CALLSIN BOX

70 three

Le 30/08/2022 à 19:18, Bob a écrit :
Look in your 3A/F6EXV logbook. Look at the logbook page window. Change the setup to show the operator column. What do you see in that column? SeventyThree(s).
On 08/30/2022 1:02 PM Paul F6EXV <f6exv@...> wrote:


No, Bob, L32 will ask me to input an operayor's callsign EACH TIME I switch from one log to another....

Le 30/08/2022 à 19:00, Bob a écrit :
If you make a logbook called F6EXV and you set the operator to be F6EXV. Now if you make another logbook called 3A/F6EXV and you set the operator as 3A/F6EXV. Now make another logbook called 3A/PB8DX and you set the operator as 3A/PB8DX

Load you F6EXV QSOs in the F6EXV logbook. Load your 3A/F6EXV QSOs in 3A/F6EXV logbook. Load your 3A/PB8DX QSOs in your 3A/PB8DX logbook.

Switching to the F6EXV logbook automatically defaults to the operator F6EXV. Switching to the 3A/F6EXV logbook automatically defaults to the operator 3A/F6EXV. Switching to the 3A/PB8DX logbook automatically defaults to the 3A/F6EXV operator.

SeventyThree(s)/
On 08/30/2022 12:33 PM Paul F6EXV <f6exv@...> wrote:


Bob,
It looks like you did not understand my question, or maybe I did not phrase it correctly.
When changing from one log to another, I am asked to input an operator's callsign.
I just don't want to input any. If I do not, I do not have access to the log ; if I enter one, it is not remembered next time I switch to that log, and I am asked again.

With a right click, I do not have the option you are mentioning in the previous QSOs window. I only have "show QSO with F6EXV only"
The F6EXV log is for F6EXV, the 3A/F6EXV is for 3A/F6EXV, the 3A/PB8DX is for 3A/PB8DX, the 3A6M log is for 3A6M.
But I just DO NOT WANT any operator callsign devoted to any callsign
I do not care about awards (I have them all already).

Thanks + 73
Paul (no operator...)


Le 30/08/2022 à 14:13, Bob a écrit :
Right click on the Worked/Confirmed and Previous QSOs windows you will see the menus to turn on/off the 'all operators' optons.

At the bottom of each award window you will see an option turn on/off 'all operators'.

SeventyThree(s)

On 08/30/2022 6:02 AM Paul F6EXV <f6exv@...> wrote:

 
hello
I manage several callsigns within Logger32 (version 296)
I do not want any operator, for any of the callsigns.
How can I achieve that ?

Thanks + 73
Paul F6EXV








Re: Operator

Paul F6EXV
 

Instead of requiring an operator callsign, could it be made optional ?

Le 30/08/2022 à 20:09, John Munton - G7SSE a écrit :

Damian

I agree with your first point:

Three logbooks each with its own operator call sign.
I can't see an issue either.

As for your second point; not possible, when changing logbooks an operator call sign is required.
If the imported ADIF does not contain an "operator "field" then imported qso's default to the current operator / user call sign.

Page 79 of the Help Guide; 

"3.1.2 Import warnings and error messages

Second image down.

73
John
G7SSE

------ Original Message ------
From "DamianM0BKV via groups.io" <kammdp@...>
Date 30/08/2022 18:52:23
Subject Re: [hamlogger] Operator

I can't see in what circumstances you wouldn't want to know who was the operator that made the QSO in a logbook but if the logbook is exported its easy just to delete the operator column if necessary. Or am I missing something?
73 Damian

--
73, John - G7SSE


Re: Operator

Paul F6EXV
 

Why do I have to enter it every time I switch from one call to another ?
As a future development, can you make provisions for no callsign( which in fact is IMHO mostly useless for the vast majority of L32 users) ?

Seventy3

Le 30/08/2022 à 19:40, Bob a écrit :

I just made the three logbooks I described earlier. It works as I said. There is no option in Logger32 to have no operator field. It is one of the ADIF fields that Loggr32 supports. SeventyThree(s).
On 08/30/2022 1:27 PM Paul F6EXV <f6exv@...> wrote:


I see the operator's callsign.
I DO NOT WANT ANY CALLSIGN TO SHOW THERE, I WANT AN EMPTY OPERATOR'S CALLSIN BOX

70 three

Le 30/08/2022 à 19:18, Bob a écrit :
Look in your 3A/F6EXV logbook. Look at the logbook page window. Change the setup to show the operator column. What do you see in that column? SeventyThree(s).
On 08/30/2022 1:02 PM Paul F6EXV <f6exv@...> wrote:


No, Bob, L32 will ask me to input an operayor's callsign EACH TIME I switch from one log to another....

Le 30/08/2022 à 19:00, Bob a écrit :
If you make a logbook called F6EXV and you set the operator to be F6EXV. Now if you make another logbook called 3A/F6EXV and you set the operator as 3A/F6EXV. Now make another logbook called 3A/PB8DX and you set the operator as 3A/PB8DX

Load you F6EXV QSOs in the F6EXV logbook. Load your 3A/F6EXV QSOs in 3A/F6EXV logbook. Load your 3A/PB8DX QSOs in your 3A/PB8DX logbook.

Switching to the F6EXV logbook automatically defaults to the operator F6EXV. Switching to the 3A/F6EXV logbook automatically defaults to the operator 3A/F6EXV. Switching to the 3A/PB8DX logbook automatically defaults to the 3A/F6EXV operator.

SeventyThree(s)/
On 08/30/2022 12:33 PM Paul F6EXV <f6exv@...> wrote:


Bob,
It looks like you did not understand my question, or maybe I did not phrase it correctly.
When changing from one log to another, I am asked to input an operator's callsign.
I just don't want to input any. If I do not, I do not have access to the log ; if I enter one, it is not remembered next time I switch to that log, and I am asked again.

With a right click, I do not have the option you are mentioning in the previous QSOs window. I only have "show QSO with F6EXV only"
The F6EXV log is for F6EXV, the 3A/F6EXV is for 3A/F6EXV, the 3A/PB8DX is for 3A/PB8DX, the 3A6M log is for 3A6M.
But I just DO NOT WANT any operator callsign devoted to any callsign
I do not care about awards (I have them all already).

Thanks + 73
Paul (no operator...)


Le 30/08/2022 à 14:13, Bob a écrit :
Right click on the Worked/Confirmed and Previous QSOs windows you will see the menus to turn on/off the 'all operators' optons.

At the bottom of each award window you will see an option turn on/off 'all operators'.

SeventyThree(s)

On 08/30/2022 6:02 AM Paul F6EXV <f6exv@...> wrote:

 
hello
I manage several callsigns within Logger32 (version 296)
I do not want any operator, for any of the callsigns.
How can I achieve that ?

Thanks + 73
Paul F6EXV








Re: Operator

Bob
 

How about the last QSO in the 3A/F6EXV logbook. Who is the operator? SeventyThree(s).

On 08/30/2022 1:27 PM Paul F6EXV <f6exv@...> wrote:


I see the operator's callsign.
I DO NOT WANT ANY CALLSIGN TO SHOW THERE, I WANT AN EMPTY OPERATOR'S CALLSIN BOX

70 three

Le 30/08/2022 à 19:18, Bob a écrit :
Look in your 3A/F6EXV logbook. Look at the logbook page window. Change the setup to show the operator column. What do you see in that column? SeventyThree(s).
On 08/30/2022 1:02 PM Paul F6EXV <f6exv@...> wrote:


No, Bob, L32 will ask me to input an operayor's callsign EACH TIME I switch from one log to another....

Le 30/08/2022 à 19:00, Bob a écrit :
If you make a logbook called F6EXV and you set the operator to be F6EXV. Now if you make another logbook called 3A/F6EXV and you set the operator as 3A/F6EXV. Now make another logbook called 3A/PB8DX and you set the operator as 3A/PB8DX

Load you F6EXV QSOs in the F6EXV logbook. Load your 3A/F6EXV QSOs in 3A/F6EXV logbook. Load your 3A/PB8DX QSOs in your 3A/PB8DX logbook.

Switching to the F6EXV logbook automatically defaults to the operator F6EXV. Switching to the 3A/F6EXV logbook automatically defaults to the operator 3A/F6EXV. Switching to the 3A/PB8DX logbook automatically defaults to the 3A/F6EXV operator.

SeventyThree(s)/
On 08/30/2022 12:33 PM Paul F6EXV <f6exv@...> wrote:


Bob,
It looks like you did not understand my question, or maybe I did not phrase it correctly.
When changing from one log to another, I am asked to input an operator's callsign.
I just don't want to input any. If I do not, I do not have access to the log ; if I enter one, it is not remembered next time I switch to that log, and I am asked again.

With a right click, I do not have the option you are mentioning in the previous QSOs window. I only have "show QSO with F6EXV only"
The F6EXV log is for F6EXV, the 3A/F6EXV is for 3A/F6EXV, the 3A/PB8DX is for 3A/PB8DX, the 3A6M log is for 3A6M.
But I just DO NOT WANT any operator callsign devoted to any callsign
I do not care about awards (I have them all already).

Thanks + 73
Paul (no operator...)


Le 30/08/2022 à 14:13, Bob a écrit :
Right click on the Worked/Confirmed and Previous QSOs windows you will see the menus to turn on/off the 'all operators' optons.

At the bottom of each award window you will see an option turn on/off 'all operators'.

SeventyThree(s)

On 08/30/2022 6:02 AM Paul F6EXV <f6exv@...> wrote:

 
hello
I manage several callsigns within Logger32 (version 296)
I do not want any operator, for any of the callsigns.
How can I achieve that ?

Thanks + 73
Paul F6EXV







Re: Operator

John Munton - G7SSE
 

Damian

I agree with your first point:

Three logbooks each with its own operator call sign.
I can't see an issue either.

As for your second point; not possible, when changing logbooks an operator call sign is required.
If the imported ADIF does not contain an "operator "field" then imported qso's default to the current operator / user call sign.

Page 79 of the Help Guide; 

"3.1.2 Import warnings and error messages

Second image down.

73
John
G7SSE

------ Original Message ------
From "DamianM0BKV via groups.io" <kammdp@...>
Date 30/08/2022 18:52:23
Subject Re: [hamlogger] Operator

I can't see in what circumstances you wouldn't want to know who was the operator that made the QSO in a logbook but if the logbook is exported its easy just to delete the operator column if necessary. Or am I missing something?
73 Damian

--
73, John - G7SSE


Re: Stopped working

Bob
 

First you need to figure out the name of your logbook ... At the top of the logbook page is the name of the logbook (all you need is the name at the end, not the full path). Now look in the zip file for files that start with that name ...There may be only two, but sometimes as many as four .. they will have extensions like .ISD, .ISF, ISM. That's your logbook. You copy them into the old/original \Logger32 directory using the mouse right click and with any luck Logger32 will think its Easter.

SeventyThree(s).

On 08/30/2022 12:32 PM k6eid <k6eid@...> wrote:


I have no idea on how to retrieve from the ZIP file. I can open them and see lots of files. What do I need to do? I will use the next to last backup ZIP since the latest was probably corrupt.

1501 - 1520 of 90634