Date   

Re: Logger32 Update

Clifford Beck
 

Hi Panos,

Ok thank you. It downloaded last night ok. 

Clifford. 
EI5FQB


On 21 Sep 2021, at 13:36, Panos <sv1grn@...> wrote:

Hi, just right clic the logger32 icon and select Run as administrator 73


Re: Logger32 Update

Panos <sv1grn@...>
 

Hi, just right clic the logger32 icon and select Run as administrator 73


Re: Cluster colors...

Jim Dawson
 

Thank you Bob! I doubt I'd ever have found it.


Re: F key labels on CW Machine

Bob
 

Open the CW Machine, right click on the top left button. A window opens. In the "Button Caption" field type F1 now click the apply button. SeventyThree(s).

On 09/20/2021 3:32 PM Paul J. Cort-Wright G3SEM via groups.io <g3sem@...> wrote:
 
 
Hi  all,
Please would someone kindly explain, how to show the F, Alt F etc labels at either end of the macro columns
They are shown at each end of the row, in the picture on page 443  (Chapter 25 CW Machine) of the Manual..

Many thanks in advance  73 Paul G3SEM


Re: F key labels on CW Machine

John Munton - G7SSE
 

Paul, they are actually the F1 and F12 columns of macro buttons, just labelled as such in the picture to show the keyboard short cuts.

73
John - G7SSE

------ Original Message ------
From: "Paul J. Cort-Wright G3SEM via groups.io" <G3SEM@...>
Sent: 20/09/2021 20:32:45
Subject: [hamlogger] F key labels on CW Machine

Hi  all,
Please would someone kindly explain, how to show the F, Alt F etc labels at either end of the macro columns
They are shown at each end of the row, in the picture on page 443  (Chapter 25 CW Machine) of the Manual..

Many thanks in advance  73 Paul G3SEM

--
73, John - G7SSE


Re: Cluster colors...

Bob
 

On the Telnet/Localhost window, right click just to the right of the Localhost tab. SeventyThree(s).

On 09/20/2021 3:16 PM Jim Dawson <jdawson@...> wrote:
 
 
Since the last update, when I do a SH/WWV in the cluster window the results are in a very pale lime green color that I can barely read. I cannot find where to change that color. It used to be black. Anyone else have the problem? Maybe a solution please.
Thanks,
Jim K9DD.


F key labels on CW Machine

Paul J. Cort-Wright G3SEM
 

Hi  all,
Please would someone kindly explain, how to show the F, Alt F etc labels at either end of the macro columns
They are shown at each end of the row, in the picture on page 443  (Chapter 25 CW Machine) of the Manual..

Many thanks in advance  73 Paul G3SEM


Cluster colors...

Jim Dawson
 

Since the last update, when I do a SH/WWV in the cluster window the results are in a very pale lime green color that I can barely read. I cannot find where to change that color. It used to be black. Anyone else have the problem? Maybe a solution please.
Thanks,
Jim K9DD.


Re: Logger32 on XP

Panos <sv1grn@...>
 

Have you tried installing 3.50 and after that updating (updates / look for updtates) ?


error opening

Lorenzo IK0HFO
 

hi

after a stop of logger32 i have this errors opening

any help?

thanks

IK0HFO

Lorenzo


Re: Logger32 on XP

Bruce (VE3GBC)
 

My quest to find the last version for Windows XP that supports UDP is turning into an exercise in frustration.

I'm starting to go around in circles.  I have been told to use v3.50 for XP, but v3.50.0 doesn't support WSJT-X and UDP (I've tried it) even though SP2EWQ says "v.3.50 knows well how to operate WSJt-X"

As I noted in a previous post, I understand that version 3.50.337 added support for WSJT-X and was updated in version 3.50.367 (from http://w4.vp9kf.com/logger32_history.htm) but I can't find any of the later 3.50.XXX versions for download.

I have tried to download v3.50.424 from here  https://en.freedownloadmanager.org/Windows-PC/Logger32-FREE.html  where it claims "The version of Logger32 you are about to download is 3.50.424" however the actual version is 3.50.0 which does not support UDP (I've tried it).

I am told older versions are available at www.logger32.net under “Old programs” however all I see there are "Old Logger32 Upgrade Versions" and not specific versions.  Further, after installing v3.50.0 I tried "Version 3.5 to 3.6" and this did not work on my XP machine.  Although the program ran, there were a number of functions that did not work, including the "Help/Version" (it did not report any version).

The links "Old Versions" and "Old Programs" on the Logger32 web site seem to point to the same page.

On the web site (https://www.logger32.net/program.html), I see a heading "Logger32 Version 4.0 upgrade from Version 3.50.421" but how does one find v3.50.421 ?

Even more confusing, IK2AGX tells me he is running v4 on XP (virtual), but I am also told v4 doesn't run on XP. I actually tried v4 and it failed to run.

To be clear, I do realise that I am trying to utilize old, unsupported versions of Windows and Logger32, so I am pushing my luck.  My XP computer is successfully running WSJT-X v2.1.2 and JTAlert 2.11.5.  I make contacts with it every day.  Adding Logger32 would "enhance" the operation.  While I do have other Windows 7 and 10 computers, I don't want to dedicate any of them to FT8.

Like many hams, I like to exhaust all options before giving up.

So my friends, can anyone point me to a SPECIFIC location to download v3.50.367 or higher?

Thank you

73,


Bruce   VE3GBC


Re: Logger32 on XP

ik2agx
 

Bruce,

I don't know, just checked here and it works on my virtual machine.



If you tell me your email address I can send you latest update release of version 3.50
that is 3-50-424.

Beware, it is just the .exe file to be copied into an already installed version 3-50

73, Dave


Re: Granted Highlight

g4girhb0 <ian.frith@...>
 

Thanks Pete,
 
But as I said  "I have the Credit Highlight selected in the Setup Highlight menu"!
 
However, I have solved the problem, by using my config file from another configuration that worked ok.
 
So the other config file was a dud.
 
73
 
Ian G4GIR
 
 

----- Original Message -----
From: n5kd <n5kd@...>
To: Radio Chat Groups <hamlogger@groups.io>
Sent: 19/09/2021 19:58:25
Subject: Re: [hamlogger] Granted Highlight

Try playing with 

Setup | Highlights | Credit highlights.

73’ Pete, N5KD.


On Sep 19, 2021, at 15:15, g4girhb0 via groups.io <ian.frith@...> wrote:

Hello All
 
I have a problem with Granted Highlighting.
 
As you can see from the pic, I have clicked on 80m 1A0, and the 80 mtr QSO is not shown with the Purple highlight in the callsign.
 
I have the Credit Highlight selected in the Setup Highlight menu.
 
Another configuration is working Ok but this one refuses to obey.
 
Any ideas please.
 
73
 
Ian G4GIR
 
 
 
 
 
 
 
<OEClassicImg01DD07F7.png>


Re: Enhancement Request - CTRL-T macro

John Munton - G7SSE
 

John

Also;

The relevant keystrokes are displayed on the Title Bar of the macro set up window for each macro button.
--
73, John - G7SSE


Re: Enhancement Request - CTRL-T macro

John, G4DRS
 

Is that something that is already coded, but I have missed?

That will be a 'Yes', then!

Nice. I never knew I could do that...


Thanks, Bob.


John
G4DRS


Re: Enhancement Request - CTRL-T macro

Bob
 

If you have the radio control panel open (and the CW machine, sound card data window,digital voice keyer all closed) type the function key that is applicable to your macro. Function keys typed on the logbook entry window are redirected to the windows mentioned above. SeventyThree(s).

On 09/19/2021 4:08 PM John, G4DRS via groups.io <g4drs@...> wrote:
 
 
On Sun, Sep 19, 2021 at 08:58 PM, Bob wrote:
How 'bout $toggleradios$
Sorry, Bob, I'm feeling a bit thick. Surely the $toggleradios$ is a macro that mimics the keystroke CTRL-T? I'm looking for a keystroke that mimics my macros. Is that something that is already coded, but I have missed? That would be nice...


73,

John
G4DRS


Re: Enhancement Request - CTRL-T macro

John, G4DRS
 

On Sun, Sep 19, 2021 at 08:58 PM, Bob wrote:
How 'bout $toggleradios$
Sorry, Bob, I'm feeling a bit thick. Surely the $toggleradios$ is a macro that mimics the keystroke CTRL-T? I'm looking for a keystroke that mimics my macros. Is that something that is already coded, but I have missed? That would be nice...


73,

John
G4DRS


Re: Enhancement Request - CTRL-T macro

Bob
 

How 'bout $toggleradios$? SeventyThree(s)

On 09/19/2021 3:19 PM John, G4DRS via groups.io <g4drs@...> wrote:
 
 
Bob,
One day, when you are bored and need something to occupy your time, is it possible to have the CTRL-T toggle programmable, so that it can run a macro instead of just the global capture?
When I switch between radio 1 and radio 2, I click a macro button on the RCP:

On the Radio 1 RCP, the macro is:
$radio2$
$slaveportopen$
$slaveportsync$
$clearlog$

whilst on the RCP for radio 2 it is:
$slaveportclose$
$radio1$
$clearlog$

If I use the CTRL-T global capture keystroke, it only swaps radios, without all the other stuff.
It's just me being lazy, or maybe it's muscle memory, but I keep reaching for CTRL-T then realising that I need to click the macro button.
It would be nice if I could achieve the same macro functionality by pressing CTRL-T without having to use the mouse.

It's not high priority, but maybe one day...?


Cheers,


John
G4DRS


Re: Logger32 Update

Clifford Beck
 

Thanks for the replies.

 I can’t find where to change to Administrator mode.  And I’ll look into Norton Security as that is the anti security on my laptop. 

Thanks. 

Clifford. 
EI5FQB



On 19 Sep 2021, at 13:33, Julian GW4JBQ <julian@...> wrote:

Hi Cliff,  Don't forget that you must run logger32 as administrator to get the updates.


Enhancement Request - CTRL-T macro

John, G4DRS
 

Bob,
One day, when you are bored and need something to occupy your time, is it possible to have the CTRL-T toggle programmable, so that it can run a macro instead of just the global capture?
When I switch between radio 1 and radio 2, I click a macro button on the RCP:

On the Radio 1 RCP, the macro is:
$radio2$
$slaveportopen$
$slaveportsync$
$clearlog$

whilst on the RCP for radio 2 it is:
$slaveportclose$
$radio1$
$clearlog$

If I use the CTRL-T global capture keystroke, it only swaps radios, without all the other stuff.
It's just me being lazy, or maybe it's muscle memory, but I keep reaching for CTRL-T then realising that I need to click the macro button.
It would be nice if I could achieve the same macro functionality by pressing CTRL-T without having to use the mouse.

It's not high priority, but maybe one day...?


Cheers,


John
G4DRS

4821 - 4840 of 90672