Hi Rick. I mimicked your settings and still not keying transmitter. However now I see I did need the radio control checked for the CAT PTT for sure. So that is a big help. I am thinking it is perhaps

Just a SWAG ... There is no DXCC for FT8. There is a DXCC_DIGITAL. In your Logger32 configuration, do you have FT8 as a digital mode? SeventyThree(s).

Hi Gary, I tried for the first time Logger32 -> Synchronize LOTW from Club Log. See below results It is reporting 6878 QSOs not found What I can't understand is why the first one, S79VU on 30M was

On the Settings menu of the digital window select MMVARI Settings go to RTTY Keying and select radio 1 use AFSK for RTTY. Then on the same Settings menu go down to Radio PTT options. In that window

Do yourself a favor and get a usb civ cable to go in the remote jack and then use that port for cat control and JTDX/WSJT-X . Download FSK 32 or 64 bit for what ever you have for Windows , install it

Hi Rick. I have tried both LSB and LSB-D and still didn't key transmit. Will try again. I am wondering about the PTT option. I know in JTDX there is a CAT Option for PTT. However in MMVARI I dont have

Gary, also, make an ADIF export of the offending JH1HFW QSO so I can see exactly what's in the requested/granted fields of the logbook. 73.

Auto-update v4.0.277 has bug fixes and enhancements to parallel logging. 73.

To use MMVARI in AFSK you need to have the radio set to USB-D or LSB-D otherwise the radio will trying to use the FSK output on the radio. 73 Rick N2AMG

Hi Paul. Using MMVARI I select the mode RTTY-R and select Radio 1 to use AFSK for RTTY. Rick

Hi Dave. Thanks for response. When I use JTDX it works fine. It hears and decodes the FT8, Keys my transmitter and logs the QSO in L32. So to me MMVARI ought to do the same? All with the existing

Gary, to investigate I'd need to see the LoTW records from Clublog.txt file that contains the JH1HFE record. SeventyThree(s)

Peter, your pictures show that JTDX is not starting on top. The JTDX title bar shows JTDX by HF community. Maybe Logger32 started JTDX, but is did not control it. On the UDP BandMap, click the

Are you trying to operate FSK or AFSK? Paul Sturpe, W3GQ QSL Bureau Mgr. W4 K4 N4 Prefixes 8860 Peninsula Dr Terrell, NC 28682

Hello Bob, Sorry I'm late. Have been out of my home. To answer your question ... YES, its ON TOP. Here some pics ... That's the one where only 'TCP' is on. But no 'UDP"

If your going to do rtty and other modes with the 7300 you need to buy a cat cable that plugs into the remote jack in the rear . This along with the USB cable give you 2 ports instead of one . You use

Hi, with W10 - In the Advanced system settings, provide the following options stay UNclicked: Best regards, Alec ------ Wiadomość oryginalna ------ Od: "Gary Hinson" <Gary@...> Do:

Errrrr, I was over-excited: we are no longer getting the red warning message, but the LoTW sync via Club Log still isn’t working properly. Club Log knows about QSOs that have been matched and

Hi Gary. I did read through and made some changes based upon the manual but certainly may have missed something. Will be reading again just in case. Thanks and 73. Rick

Hi Rick. Have you been following the IC-7300 section of the User Manual? The advice in there was proffered by various ICOM users. If you spot errors or improvement opportunities, please