Hello Bob, Me again. In the meantime 2 Gentlemen (sorry, I deleted their emails by mistake) came up and made some additional advise. Well, I deleted all 5 of those

What I allways do is rename the files like ZoneException.isdold so putting old behind the .isd .isf .isl .ism .isx 73 Jan PA4JJ Op 28-7-2021

I believe the advice still stands, Peter, but as you are (quite rightly!) reluctant to delete the files, and I am not an expert in this area, you may prefer to rename or move them all e.g. to a

Hello Bob, Tnx a lot for your quick answer. Trying to follow your advise I found out that I don't have 3 or 4 of those files but 5 (five). Look here ...

Hi Andy The best I came up with for mine were; LSB $hexcommand FE FE 98 E0 01 00 ## FD$ USB $hexcommand FE FE 98 E0 01 01 ## FD$ CW $hexcommand FE FE 98 E0 01 03 ## FD$ RTTY $hexcommand FE

Peter, your Zone Exceptions database has crashed. Look in the Logger32 directory for these three files: I is possible you have four files. Delete them all. Start

Hello, I need some help. Since yesterday evening I'm unable to start Logger32. Whenever I click on the Desktop icon Logger32 comes up for a fraction of a second and is immediately

Look in the radio documentation for the CAT command to change the filter setting. Then look at page 594 of the help file for examples of Icom CAT commands. The only thing to be wary of is the CI-V

Download the Cat command manual for the 7610 then study it along with the Icom cat commands in the logger user manual . Its pretty easy to do and you should learn how it all works. There are endless

Hi New to the RCP screen Can you set a button for the different filter setting on the radio? If so can someone help please. Radio is icom 7610 73 Andy M0NKR

With amazing foresight and without changing the wording, section 36.3.4 of the manual will become correct as the universe snaps neatly back into alignment with Logger32 version 4.0.290. 😊

Aside from the auto-start utilities, you might also need to check that the particular fonts used in your installation of Logger32 are installed on the new PC. Oh and if it is not stored in the

Comports numbers and audio device settings might need changing too. Also, any utility programs that Logger32 might use need reinstalling. Especially if Logger32 auto starts them. John G7SSE

Install Logger on the new PC, then copy complete directory ( C:/Logger32 ) from the old to new PC. Works fine here. 73 DK5MO 27.07.2021 15:04:14 norman9795 via groups.io

Hi Normal, Install a fresh copy on the new PC ensuring you use the same file path. Don't mess about with any configuration all you are interested in is setting up the registration entries. Then

I am looking for the easiest way to port my rxisting installation to a new PC with the minimum of effort. Norman G2DWB

Thanks Bob... Vince G0ORC

Oops, my fault. There are six places in the code that look for '$qsy ...' in a macro. one of them was case sensitive. It is fixed for th next auto-update. SeventyThree(s).

🙂 73 de aki JA1NLX

Aki, Thank you - I was replicating what was in the manual. Perhaps Gary could amend Section 36.3.4 to reflect the use of the lower case. The manual shows upper case. Thank you again Vince G0ORC