At 12:24 PM 4/29/2021, you wrote: >Lastest version is 4.0.253. Why do you use an older version? Fabio, Because, when I down loaded it back on 3/25 that's what came down. I've spent a lot of time

John, Your Step 3 should be set to “internal”. Your Step 4 should be #23 HamQTH lookup. I use HamQTH, by the way 73’ Pete, N5KD. Sent from Mail for Windows 10

Lastest version is 4.0.253. Why do you use an older version? 73s Fabio, IZ8MBW On Thursday, April 29, 2021, 06:14:20 PM GMT+2, John

I'm trying to learn how to use Logger32 (Version 4.0.247) andhamqth. I'm trying to setup Logger to get name, addres, etc. infofrom hamqth. I've listened to a couple of youtube videos, useLoggers

Everything you need is in Help/Manual.

Thank you Bob! 4.0.253 is again fast to startup (like version 4.0.251) and also more fast when shutdown (seems backup is more fast). Until now no errors during using it and during closure. CW Skimmer

Hi. Just wondering why my transceiver will not transmit when Cherry Picking mode is selected? That is, it doesn't respond to stations that are decoded on the UDP Bandmap. This is a recent development

What I did was just make another folder named "Logger32 Beacons" and installed an instance of Logger32 in it. I then made a shortcut for the exe file and named it "Logger32 beacon log," ran the

Maintenance release (bug fixes) is online. SeventyThree(s).

Two minutes work. At the bottom of the 30m section make a CW row from 10.0 MHz to 10.15 MHz (or whatever your 30m band edges are). Fill in each column of the new row. Click APPLY. All done.

Hello thanks, looks like I have some copy and paste work to do hi 73

Panos, there is no 'correct' file, you must customize your own based on how you like to operate and you country's regulations. Click TOOLS | SETUP BANDS AND MODES. SeventyThree(s).

Hi yes but, when Logger32 opens I get the following message (if you have a correct bandmode file please send) 73:

Panos Is this option checked ? 73 de aki JA1NLX

I see that the problem occurs only on some lines (qso's) that have been (automatically via udp) entered without band (30m) but with correct frequency (10137.43). Maybe the fault is in my bandmap file.

Hi, last version here and today: 1. qso's logged ok from WSJT-X 2. when I try to insert the sfi or tx pwr number I am getting the following error any idea? Thanks 73

Good question Tom! The User Manual wasn’t very clear on configurations so I've updated that bit. At present, the updated info is still tacked-on to the contesting chapter, but I've added "and

I forgot to mention that my Radio 2 serial port setup has the IC-7300 as the selected radio rather than the generic Icom option. John

My IC-7300 does work correctly when it is the primary radio, I copied off the debug log for both the 7300 and the 1000D and added some comments. Red is the radio response and blue is comments within

Tom, short answer, no you can't do that. However, you can setup two different Logger32 configurations - One with your default preferences, and a second you 'beacon listening' configuration. You then