I know I must be missing something simple, but I can’t figure it out. I want to generate an ADIF file that I will use to respond to paper QSLs received from the dx bureau. I know to enter the call

Open the L32 Internet Lookup window and then click toolbox then setup External module. Look at see exactly what path Logger32 is pointing to. That will be the one that gets loaded from Logger32 when a

Something I did last week which resulted in thinking I had replaced the old version of L32Lookup with the new one. But I hadn't. I had 2x folders 1x folder at the top of my C drive in use by

Easy Bob . I see your blood pressure rising ! Dave N8DC

Phil, yes you quoted me accurately. However to keep it in contest, I also said something like 'I haven't tested in a long time', or 'when I last tested' ... So yes, it appears WSJT-X has in their

How can we help you if you won't help yourself? You said: Logger 32 for some reason will not allow me to use this device. What do you see, what do you not see? Does Logger32 see the port? Can you

If it works in N1MM it sure should work in Logger 32 ? comport and use dedicated serial port and rts or dtr keying.use ptt to switch to transmit. Make sure you dont have 2 programs trying to use the

Bob That’s very good news that your L32 is logging the operator name for a QSO via WSJT-X In a reply you gave to me on Monday 20th you said“I think you'll find the when using WSJT none of

Guys I have tried all the above to no avail. Logger 32 for some reason will not allow me to use this device. Is anyone else using it and if so how did you configure it? It works perfectly with

I installed WSJT-X v2.2.2 and made some 20M FT8 contacts. I see this: 13:24:57 Cherry-picking AK4AG started AK4AG sent: CQ AK4AG FM18 AK4AG not worked on 20M/FT8 13:24:57 Sent message

Crikey!, now I know why I use a straight key, plug in and go! 73 de Barry/gm4gif

... and Google wont tell me if the gizmo actually toggles PTT, so you'll need to experiment with that by turning on your VOX (if your radio can operate CW PTT that way). SeventyThree(s).

... and Google tells me it uses RTS keying. So, with the gizmo unplugged, open the CW Machine. Select Software keyer. Open the Keyer setup. List the serial ports Logger32 can see. Now

Mike I think you need to select "Software mode" and select proper serial port in CW machine. The serial port is created when the device is connected to PC. 73 --

I was trying to get CW Machine in Logger 32 to control a USB to CW device. Device works fine with N1MM but I can't get it to work with Logger 32's CW Machine. The device is a LD-C103 and simulates

Pete Perhaps you could do some tests when you get a moment (L32 + WSJT-X) and let me know if and when it stores the name etc Thanks Phill G6EES

Thanks for the explanation Phil. I’m sure I have seen exactly the same behaviour with WSJTx, sometimes carrying over the Name / QTH info and other times not. I’ll watch the thread for any

Pete Yes, thats exactly the same problem (when using WSJT-X). Its only when WSJT-X automatically stores the QSO. If i manually store a QSO, by pressing enter key when in the L32 LogEntry window, then

Hi Phil I’m late to this thread, but curious of the answer. I use JTDX and have it set to carry over Name & QTH from L32 (Using Ham QTH) and all works fine. But if I use WSJT-x and L32 (I

Steph You say it is working normally again. Do you use WSJT-X with Logger32? If yes, is the name recorded in your L32 logbook when the QSO is automatically recorded by WSJT-X? Phill G6EES