If you are sure it's just the highlight color you have lost (and not the actual W, C, and G status), then click SETUP | HIGHLIGHT| CONFIRMED HIGHLIGHT. SeventyThree(s).

Hello I have been using the various DXCC award grids to map my stats with the contacts shown as W C G as appropriate for decades. For each I have had the background of the slots being red, yellow

... also, as you're a CW only operator, you can zoom all the BandMaps to show only the spectrum of interest, then filter out all the modes du jour so that only your preference is visible (sort of like

Logger32 version 3.50.xx supports COM1 - COM16. It is in the Help File. SeventyThree(s).

I created a VSPE splitter for serial rotor ports to use them by multiple applications and remote. I tried port 16 and 32. Both work with rotor controls and n1mm but not logger32. The message

Thanks Bob, I really appreciate your efforts on this subject, I will look into the CW Machine. I shut down the PC and restarted again, Bingo, CW is selected but only for a short time, then

If you operate CW only, then yes, remove all the other modes from the BandPlan (if nothing else it will make things go much faster without having to plough through all the garbage to get to CW at the

Bob I have checked the Mode on the input window and have posted another screen shot below. I only use CW, I don't any other settings relating to RTTY or any other mode.

... also, what is/was the comments associated with the HB9CHB DX Spot? If the comments indicated RTTY, that would put the radio on RTTY. SeventyThree(s).

First line of bad.adi -- Sent from my Android device by VE6LB with K-9 Mail.

Do you have the Sound Card Data Window open (running RTTY maybe)? What option(s) have you selected to determine what mode to put your radio on (Click on the word MODE at the top/center of the Logbok

All, I have a small problem on 20m setup for Logger32 which appears to have just started. Usage Logger32 V3.50.419 (Latest available update) Radio ICOM 7610

At the start of each bad.adi qso record listed there is a line "error in the......" Usually for me county entries are most common. Given that counties are of no interest to me I just find that part of

Without looking at the bad.adi file, it's difficult to tell. SeventyThree(s).

After attempt to import LoTW report I've got many rejects. The note says that bad.adi created and it will be noted why these Q's are rejected. I don't see any note and cannot find anything wrong.

Thank you 73 Pete G4RRM

Its View | Grid appearance etc. It is chapter 1 in the Help ;) 73 Villi TF3VS

Hi All Sorry to ask, but can someone tell me where I find the option to change font colour in the Logbook window please? It escapes me right now! 73 Pete G4RRM

No worry, thanks. Jim Altman jaltman636@...

No I have not added that to the eQSL upload yet. Been busy and haven’t been back to work on it. 73 Rick