Ilya, I have always found the Logprint to be very sensitive, so to speak, but when it runs it is very good, hi. What are you using for the decimal symbol in your computer? It must be a period (.) if

So, gentlemen, is is possible to mate all three: radio (FTDX5k), L32 and WSJT? From written above I understand it could be done by using the UDP, please explain how to configure it. I have exactly the

I was playing with Custom label design and at some stage LogPrint crashed. Now every time I'm trying to "preview" my design I'm getting "Run-time error 13: Type mismatch". Shutting down and re-start

I added this to the [Globals] section of the Logger32 INI Looking at the Logbook Entry Window SETUP menu, I see this SeventyThree(s).

I am trying to widen the Clear Callsign on QSY Allowable parameter. I have added Allowable QSY Frequency=3.0 to the [Globals] section of the ini file but it has no effect. If the setup box is checked

BIG thanks Andy SP9KR

If the focus is on the Logbook Entry Window, <ESC> aborts the DVK. Additional functionality for the next auto-update ... if the focus is on the DVK, <ESC> will abort. SeventyThree(s).

Thanks very mach Villi is very easy to fix 73

DVK is wonderful tool and I am using it a lot. I have one request though that in addition to ABORT we have ESCape key working. Andy SP9KR

DR Giannis Try to open the cw menu: Config – Appearance – Text/Font Colour and change the name and size of the font. MS Sans Serif – Regular – 10 works fine. 73 Villi TF3VS

Good morning , a few days i have one problem the cw program no more write text but very big later look the icon , any idea fix this problem ? Thanks 73 sv9rgi Giannis

I have sent eMail to gmail asking ¿qué pasa? but do not expect any meaningful/constructive/helpful reply. Seventythree(s).

I have gmail... do have an arrl.net but is forward email maybe work or time to try a different one...

Hmmmm Better luck now. Now I get transmit going on JTDX as should. Looks like one needs a PhD to make these SW combinations work right..... but wait.... I have a PhD in physics! Thank you all for

Just to check, I configured my local SMTP service, and it works as expected. SeventyThree(s)

Got it. Actually there is no “Telnet spot font color”. Since I was connected to VE7CC it was under Local Host Spot Forecolor. I was looking for a Font option. I missed it….. TU 73 Tony

... and AutoTx on? SeventyThree(s).

Markku JTDX accept UDP reply message of CQ/RR73/73. When you want to call XX1XX then click XX1XX in UDP BandMap. XX1XX is surrounded by small box. When he sends CQ/RR73/73 next

I will check out my settings, once again. I think I had the as above but no luck yet with JTDX. HOWEVER I managed to make WSJTX actually call somebody. NOW: Is it only that this automation calls a

It’s an smtp server error, something went wrong talking to the smtp server, perhaps your server changed its requirements. Jim Altman jaltman636@...