This is an exciting thread ... I have absolutely no idea what the complaint is, so I'll take the easy way out, and just go back to bed. If/when someone can explain what is not working as expected,

I do not know what is your settings in Config menu. However try again with same settings as mine. 73 -- 73 de aki JA1NLX

I see the same, like on your screenshots. Mike

Mike What you see in UDP message debug window ? I see like this. and move mouse over "UDP" in lower status bar. What you see ? I see like this.

See attached screenshots. 403 and 405. Mike

This is what I see... 73 -- 73 de aki JA1NLX

Mike Please give us more info. This is what I see in UDP BandMap with Logger32 ver3.50.405 and wsjtx) 73 -- 73 de aki JA1NLX

Same here. After update to 405 ws--tx window is flooded by callsigns should not be shown here. Back to 403, all fine. Mike

A copy/paste from the radio debug window showing commands sent and replies received would be helpful ... I quote "... and then it immediately changes back to the mode it was in which I had set

UPDATE: I loaded the 7610 RCP and was trying to set things up. I see that a click on a packet cluster spot sends the radio thee in frequency and mode, and then it immediately changes back to the mode

Thanks a lot to all. Now is working fine also for me (Win10-x64). Need restart after change the file ssn.dat Regards Carlo - ik3oyu

I suppose you could, when working split, transmit on VFO A and listen on VFO B. That way, the UDP Broadcast frequency is already where it needs to be even before the user starts hollering. It's not

HFAUTO USERS take note… 73, Terry / W1TR : )

Thanks ALL! I too got it working (WIN7)! 73, Rick VE7TK

Villi, our emails crossed, I just found the same as you state. 73, Dave

Ok, guys got it working at last ! the file SSN.dat to be amended is the one find at following path: C:\Users\User\AppData\Roaming\Afreet\Reference and not the one in the HamCap folder. 73, Dave

OK, I figured this out. The key is to read the instruction from the author, hihi. The new SSN file is in the download area of the software and the key to finding the location of the old file (it is

Hi again John and Paul, it still doesn't work here, mine too starts at 2005 and end up to 2019, no way to go above. I am using Win 10 here, I did try with both John datas and those downloaded from

Latest from Alex. <snip> "Please download the new SSN data from http://dxatlas.com/Download.asp 73 Alex VE3NEA" <snip> Scroll down to Han Cap and there you will find file - Ssn.dat SSN data for

Running Win10 here Paul. I just altered the data in your file to match the format of the original SSN.dat file and pasted it in. 73, John - G7SSE