Hi all, I am using new notebook with Windows 10.After Logger32 installation /newest ver./ I am not able to set CAT control between this one and my radio FT817.Maybe bad drivers?On my old PC I was

Thanks Paul - sorted, now to fix my FT8 with win 10 :-( Tom

That seems to have done the trick thanks, now importing my log..... Thank you so mucbh Tom GM4FDM

OK Thanks I will try that..... Tom GM4FDM

Tom You need to run Logger32.exe and Logger32autoinstaller.exe (in the Logger32 folder) as administrator. 73 -- 73 de aki ja1nlx

Hi Tom, Close Logger32 if it is open. Go into your C: drive and double-click on the Logger 32 folder on your system using Windows Explorer (short cut hold down the Windows key to the left of the Alt

Having run Logger 32 for some considerable time without difficulties, how do do certain things is a distant memory. My old trusty Windows XP Pro puter has finally bitten the dust and I am trying to

I had it checked for the Import option, but missed the logbook entry setup option, it was not obvious. I've got it checked now, and seems to work with a test QSO from WSJT-X. Thanks Steve VE3RX

Steve If you mean "Import Logs" then check "Flag QSOs for LoTW export file" option. If you mean "Direct logging" via UDP or TCP then check "Flag QSOs for LoTW" in Logbook

When one normally imports an ADIF file, it gives options to flag them for export to LOTW, eQSL, etc... However, there is no such option with UDP packets that are imported from an external source.

Hi all. I want deeply thank to Aki, JA1NLX, for his very value and great help, for get L32 could be work with my Icom IC7300. Othetwise, I will glad someone that work with N1MM help me get best

I like to simplify stuff, so once I had the multiple configurations working, so I wrote a batch file to enable selection of those config files. It also ensure all programs associated with L32 are dead

John, Logger32 supports 2 radios. Very simple solution. Establish 2 Logger32.ini files. Configure 1 for your two most used radios. Configure the alternate for the other 2 radios. Jim –

John Check the Help File, in the installation section, regarding setting up a second Logger32 ini (config) file. You could set up three or four for different radio combinations, and even different

Hello, I am fortunate enough to have 4 HF radios, each of which I connect to Logger32 at times. I tend to leave Radio 1 set as is and change the settings of radio 2 to whichever of the other 3 I wish

The best way to run wsjt-x and jtdx is to use the remote port on the 7300 for cat and keying and use the usb port for the on board sound card . If you actually got 2 ports off the usb cable like the

Hi Radhames, I am not familiar with the IC-7300. If you would download the latest Logger32 Help file, you should find adequate setup information. Perhaps Aki, JA1NLX can offer more specific solution

My preference is to turn off all of the automatic formatting and leave it off. It works great. I get what I type and I can edit things as I like. -- Gerald, VE1DT

That depends on the entry, Jan. It is by exception. Here’s an example: WN3LIF emailed me about this QSO, signing his email as “WT”. To put that into Logger32 as two capitals is

Hy Gary What is the purpose of this editing? 73 Jan PA4JJ Op 12-7-2018 om 11:29 schreef Gary Hinson: --