Whet would cause the LOTW indicators in the logbook window to disappear when scrolling the logbook window? Here is the scenario. The logbook window is set to show LOTW users in a unique color. All

Interesting to read all this, however, my L32 (335) is unable to find any update, manual or automatic. First time I've seen this problem. In auto when the notice about checking for updates eventually

Rob DX Spot window, right click and look in the Setup menu. Have a look in the DX Spot window section of the help file, scroll down to paragraph 2.9.6 eMail alerts. 73 John G7SSE

Excuse my ignorance but could someone tell me where I can find this Email alert function on Logger 32 ? 73 Rob GM3YTS

John it is not on the "Beta" site. It is on the Logger32 Home site On 2017-11-03 4:55 PM, jcowens1@... [hamlogger] wrote:

What is version number ? The latest auto update version is 3.50.336. 73 de aki ja1nlx ---In hamlogger@..., <jcowens1@...> wrote : I tried to load the beta site mentioned, but it said it was not

I tried to load the beta site mentioned, but it said it was not there. I am running the latest version (automatic release) and could not find mention of H2S or UPD. Please clarify. John Owens - N7TK

Make that "UDP" :=(( 73 - |Hew On 2017-11-03 4:47 PM, Hew Lines hewlines@... [hamlogger] wrote:

The current Helpfile is on the Logger32 release site, as they always have been, and does reference H2S. A new helpfile will be released soon with the changes to refer to UPD instead of H2S.

It is called "UDP" now and not "H2S" Look for "UDP" at lower status bar. In the latest Help you still see "H2S" and not "UDP". Help will be changed in the next Help release. 73 de aki ja1nlx ---In

Sorry, but I find no mention of H2S at the bottom line of L32, nor do I find it mentioned in the HELP file. John Owens - N7TK

Hi Aki, that was the problem, unchecked box. That menu as a lot of item's and I did not realize that !!! It´s work perfectly. Tks for your patience and help. 73 Rodrigo ct1bxt

Rodrigo you checked "Allow QSO automatic logging" in UDP BandMap Config menu ? ---In hamlogger@..., <ct1bxt@...> wrote : Tks Aki, i use it as you says for a long time as I like to see WSJT-x open a

Tks Aki, i use it as you says for a long time as I like to see WSJT-x open a new window to log qso. Also not to forget to log qso ah ah. Unfortunately does not work. Rodrigo

Rodorigo Check "Prompt me to log QSO" in WSJT-X setting table. When you log QSO in WSJT-X then you must click "Log" in this table. Then QSO is logged in Logger32. With JTDX you need not check "Prompt

Hi Aki, working with WSJT-X ver 1.8.0 (last version) can see the station calling list, but logger32 does not log the qso´s. Does I need to do some special commands ? I´m using win10 64

Steve What is "data traffic window" ? Decoded callsigns are displayed in the UDP BandMap at every 60 or 15 seconds When QSO is logged in WSJT-X/JTDX then this QSO is logged automatically in

Great symbiosis work but the click on the data traffic window should not bring the CALL to the log entry window to log on Logger32 but to that of WSJT-X to be ready to link with the corresponding

The download is working fine here Mike. Also the UDP does import FT8 contacts directly into the Logger32 log . Thanks for our FT8 contact Mike. This week I made DXCC on FT8 and

Hello Many thanks Aki That works fine here... Envoyé de mon iPad