Verne, something does not look right. I don't see any frequency/mode in theradio response. If youhave the manual, look in the CAT section and check the book against the POLLcommand. It maybe

also configuration is as per Yaesu manual Baud 4800 Data 8 Stopbits 2 Parity none and Data file is blank From: Jim Hargrave To: hamlogger@... Sent: Saturday, September 28, 2013 12:17

Hi Jim, Yes to both. This is what is showing Using #1 RX : 00 00 00 00 01 Using #1 ACK : 00 00 00 00 0B Using #1 Poll : 00 00 00 00 01 Using #1 RX : 00 00 00 00 01 Using #1 ACK : 00 00 00 00 0B

 Verne, Openthe radio de-bug window. Do you see the polls going to the radio and do you seea reply from the radio. If so,open "Setup | frequency" and make sure the first line ischecked. Ifnot,

Hello group. If this subject has been brought up[ before I apologize but I couldn't find it. I am trying to connect my 767 to my computer with the FT-62 CAT cord. I have gotten it hooked up and the

Hello Thanks Bob That works fine :-) 73 Dan 2013/9/27 <k4cy@...> -- F6FLU Daniel Lavocat http://dlavocat.fr http://F6FLU.fr

Let me clarify the steps Phillippe gave. This operation appears to me a little awkward but it works. I had to play with it several times to get my Cluster window to disappear. 1. On the Main toolbar

What did I say? Correction on PowerMate Griffin programming ... To control the primary radio, program your Griffin: CTL+rightArrow for up xHz, CTL+downArrow for down xHx, ALT+CTL+rightArrow for up

Thanks Bob, That worked! Cheers, Paul On 28/09/2013 1:17 a.m., k4cy@... wrote:

Did you try setting up the STX field on the Logbook Entry Window with a preset text of 32? Of course you'd probably want to turn the silly thing off after the contest. 73. From: "Paul Ormandy ZL4PW"

Hi guys, Thansk for replies... but I want my CQ zone to appear in the STX field of the ADIF trail. Should have made that clear! So when I convert the ADIF to Cabrillo, 32 will appear in the STX

It’s Zone plus State/Prov for this one. No variables. 73, Gerry VE6LB From: k4cy@... Sent: Friday, September 27, 2013 7:04 PM To: hamlogger@... Subject: Re: [hamlogger] Using MMVARI for

I have no idea what the exchange is, but have you tried $transmit$BLAH BLAH 599 32 BLAH BLAH$receive$ or maybe even $transmit$BLAH BLAH 599 $serialnum$ 32 BLAH BLAH$receive$. Exactly what do you want

Paul, I just put it in the exchange 599-04-AB (need your state in thiscontest). 73, Gerry VE6LB/VA6XDX DXCC, VUCC, WAS Card Checker-SouthernAlberta VE/VA6 QSL Bureau Team (403)

Hi all, I know L32 isn't built as a contesting program but have not yet set up an alternative for RTTY contesting (like N1MM which I have installed). Is there a way for the STX field to be fixed to

The next Logger32 update will include support for the Griffin PowerMate USB knob. I you have a Griffin (or maybe a pryde of Griffins :) set them up as follows: To control the primary radio,

Hi Jim, Thank you for the quick answer. You hit the nail. I had a seperate SWL-label BUT made a wrong ADIF-allocation in the first ADIF-field (Field 1). Changed it now to "CALL" and everything is

Martin, Not happening here on my W7/64 machine. 73 Gerry VE6LB From: Martin Sent: Friday, September 27, 2013 08:27 To: hamlogger@... Subject: [hamlogger] opening DX cluster Hi I`m NOT

Pez, Whatprogram are you using for printing the labels? Youneed to configure a different setup for SWL cards which does not have theQSL_VIA field included. I useLogprint for printing QSL cards and

Hello Martin, Ray If you don't need DXCLuster in Logger32 Open in main toolbar..View Then Show Cluster Windows Telnet windows is now open Open the second Tab wich is the cluster Then Right Click in