Date   

Re: Logger 32 problem

Jan <hamlogger@...>
 

Sten

Goto File--change logbook
Then put in the pane behind Logbook the name you want your extra logbook to be. Lust overwrite the existing name.

73
Jan
PA4JJ

Op 30-4-2022 om 10:05 schreef sm4cti Sten via groups.io:
I have just reinstalled Logger 32 to a new computer and need some help.

1. I forgot how to add an extra log book

2. When adding a new QSO there should come up info on DXCC country---but the field is blank

3. When adding a call it should come up info in "worked/confirm" panel--but nothing

Hope for instructive help

Sten

SM4CTI







-- 
73
Jan
PA4JJ
______________________________________________________

My dxspider clusters running 24/7 on a raspberry pi 2
pa4jj-2 telnet 77.174.195.163 port 7300
pa4jj-3 telnet 77.174.195.163 port 7388


Logger 32 problem

sm4cti Sten
 

I have just reinstalled Logger 32 to a new computer and need some help.

1. I forgot how to add an extra log book

2. When adding a new QSO there should come up info on DXCC country---but the field is blank

3. When adding a call it should come up info in "worked/confirm" panel--but nothing

Hope for instructive help

Sten

SM4CTI


Re: Yaesu FT990 & Logger32

LZ1QV
 

HI Charles,

Attached my configuration.
Works flawlessly for years.

73's Deko LZ1QV

On Fri, 29 Apr 2022 at 21:18, Charles <charles.wilmott@...> wrote:
Hi all,
         Does anyone still use this combination of Transceiver with Logger32? 

I have the CAT cable attached and the 'CAT system' light in the 990 display both illuminates and flashes, but I can't get the connection in Logger32.

I have tried several combinations of data but currently I have;

COM 8 
Baud 4800
DataBits 8
StopBits 2
Parity None
DTR and RTS ticked.

Any advice would be welcome please,

Thank you,

With kindest regards,

Charles

Charles Wilmott (MØOXO)
60 Church Hill,
Royston, Barnsley,
South Yorkshire, S71 4NG
England, United Kingdom

Tel ; (+44) 7900 500775

The information in this internet email is copyright of Charles Wilmott, confidential and is intended solely for the addressee(s). Any views expressed in this e-mail are those of Charles Wilmott only, except where the sender specifically states these to be his own views. Access, copying, dissemination to or re-use of information in it to or by anyone else is unauthorised.


Uninstall and Reinstall Latest version

Jerry Spring
 

I have been running V4.254 for a long time.  Can someone send me instructions on how to do a complete uninstall and re-install and also keep my previous settings, as well as 3rd party plug-ins? I just use QRZ.com and WSJT-X.  I have never been able to get the automatic updates to work after loading V4.0 and have never had the Help working for any previous version.  Hence the reason for the new install. Thanks.

Jerry VE6TL


Re: LoTW/OQRS indicator in DX Spots window

Paul F6EXV
 

John and all
As it often happens, minutes after I sent the help message, I found what I was doing wrong.
After downloading the correct database( from Clublog), everything came back to as what I expected.
So, sorry for bandwidth !

73
Paul F6EXV

Le 29/04/2022 à 22:18, John Munton - G7SSE a écrit :

Paul,

have you maybe turned off the Tooltips for the DX Spots Window or Band Maps?

73
John - G7SSE

------ Original Message ------
From: "Paul F6EXV" <f6exv@...>
Sent: 29/04/2022 21:10:42
Subject: [hamlogger] LoTW/OQRS indicator in DX Spots window

Hi all
Untill a couple of days ago, I think I remember that when I put the mouse over the small rectangle, at the left side of a spot line, I had a small screen pop up saying if the spotted station was a LoTW user and/or an OQRS user.
Now, I am only getting blue rectangles, and no indication of what it means.
I have just spend over an hour searching the manual about this, to no avail.
Anyone can help please ?
 
thanks + 73
Paul F6EXV
 
 
 
 

--
73, John - G7SSE


Re: LoTW/OQRS indicator in DX Spots window

John Munton - G7SSE
 

Paul,

have you maybe turned off the Tooltips for the DX Spots Window or Band Maps?

73
John - G7SSE

------ Original Message ------
From: "Paul F6EXV" <f6exv@...>
Sent: 29/04/2022 21:10:42
Subject: [hamlogger] LoTW/OQRS indicator in DX Spots window

Hi all
Untill a couple of days ago, I think I remember that when I put the mouse over the small rectangle, at the left side of a spot line, I had a small screen pop up saying if the spotted station was a LoTW user and/or an OQRS user.
Now, I am only getting blue rectangles, and no indication of what it means.
I have just spend over an hour searching the manual about this, to no avail.
Anyone can help please ?
 
thanks + 73
Paul F6EXV
 
 
 
 

--
73, John - G7SSE


LoTW/OQRS indicator in DX Spots window

Paul F6EXV
 

Hi all
Untill a couple of days ago, I think I remember that when I put the mouse over the small rectangle, at the left side of a spot line, I had a small screen pop up saying if the spotted station was a LoTW user and/or an OQRS user.
Now, I am only getting blue rectangles, and no indication of what it means.
I have just spend over an hour searching the manual about this, to no avail.
Anyone can help please ?

thanks + 73
Paul F6EXV


Re: VE8AT NCDXF Beacon

Michael Harris
 

Hi,

I look forward to it.

Regards,

Mike VP8NO

On 26/04/2022 18:53, Bob wrote:
It is moved. Guess I missed the memo. SeventyThree(s).


Re: Yaesu FT990 & Logger32

Bob
 

How 'bout page 856 of the help file? SeventyThree(s).

On 04/29/2022 2:18 PM Charles <charles.wilmott@...> wrote:


Hi all,
         Does anyone still use this combination of Transceiver with Logger32? 

I have the CAT cable attached and the 'CAT system' light in the 990 display both illuminates and flashes, but I can't get the connection in Logger32.

I have tried several combinations of data but currently I have;

COM 8 
Baud 4800
DataBits 8
StopBits 2
Parity None
DTR and RTS ticked.

Any advice would be welcome please,

Thank you,

With kindest regards,

Charles

Charles Wilmott (MØOXO)
60 Church Hill,
Royston, Barnsley,
South Yorkshire, S71 4NG
England, United Kingdom

Tel ; (+44) 7900 500775

The information in this internet email is copyright of Charles Wilmott, confidential and is intended solely for the addressee(s). Any views expressed in this e-mail are those of Charles Wilmott only, except where the sender specifically states these to be his own views. Access, copying, dissemination to or re-use of information in it to or by anyone else is unauthorised.


Re: Yaesu FT990 & Logger32

Albert Crespo
 

Change the Baud to 32000.

On Apr 29, 2022, at 19:18, Charles <charles.wilmott@...> wrote:


Hi all,
         Does anyone still use this combination of Transceiver with Logger32? 

I have the CAT cable attached and the 'CAT system' light in the 990 display both illuminates and flashes, but I can't get the connection in Logger32.

I have tried several combinations of data but currently I have;

COM 8 
Baud 4800
DataBits 8
StopBits 2
Parity None
DTR and RTS ticked.

Any advice would be welcome please,

Thank you,

With kindest regards,

Charles

Charles Wilmott (MØOXO)
60 Church Hill,
Royston, Barnsley,
South Yorkshire, S71 4NG
England, United Kingdom

Tel ; (+44) 7900 500775

The information in this internet email is copyright of Charles Wilmott, confidential and is intended solely for the addressee(s). Any views expressed in this e-mail are those of Charles Wilmott only, except where the sender specifically states these to be his own views. Access, copying, dissemination to or re-use of information in it to or by anyone else is unauthorised.


Yaesu FT990 & Logger32

Charles
 

Hi all,
         Does anyone still use this combination of Transceiver with Logger32? 

I have the CAT cable attached and the 'CAT system' light in the 990 display both illuminates and flashes, but I can't get the connection in Logger32.

I have tried several combinations of data but currently I have;

COM 8 
Baud 4800
DataBits 8
StopBits 2
Parity None
DTR and RTS ticked.

Any advice would be welcome please,

Thank you,

With kindest regards,

Charles

Charles Wilmott (MØOXO)
60 Church Hill,
Royston, Barnsley,
South Yorkshire, S71 4NG
England, United Kingdom

Tel ; (+44) 7900 500775

The information in this internet email is copyright of Charles Wilmott, confidential and is intended solely for the addressee(s). Any views expressed in this e-mail are those of Charles Wilmott only, except where the sender specifically states these to be his own views. Access, copying, dissemination to or re-use of information in it to or by anyone else is unauthorised.


Re: Logger32 - Adding N1MM ADIF Column for QSO Party Rover Log

Hunter - K3IE
 

Will do - thank you Bob very much!

Best 73 - Hunter K3IE


Re: Logger32 - Adding N1MM ADIF Column for QSO Party Rover Log

Bob
 

... and, seeing as you're a newbie, I suppose I should tell you that if you have already imported the N1MM ADIF file without importing the APP_N1MM_ROVERCNTY field, you cannot simply import the file again to get the missing field. This is because the QSO is already in the logbook. You will need to start over with an empty logbook. SeventyThree(s).

On 04/27/2022 2:49 PM Hunter - K3IE <hunter.k3ie@...> wrote:


Hoping someone here can give me a suggestion - 

One of our TCG club members participated as a Rover in the recent GA QSO Party using N1MM Contest Logger and our club call K4TCG.  

I am the new QSL manager for our club call and was hoping to use the Logger32/LogPrint tandem to print the QSL labels for this and future club call events.  However, I cannot figure out a way to add the N1MM ADIF county column "APP_N1MM_ROVERCNTY" to the Logger32 software.  I have successfully built the LogPrint Custom label layout, which includes this N1MM County Column, and am able to generate correct multi QSO labels directly from the N1MM ADIF file en masse.   But, I was hoping to use Logger32 to pick and choose what call labels to print and export that ADIF file to LogPrint instead of all the calls coming over at once.  

Was also wondering if this is necessary or is there a way to have LogPrint extract call specific entries and from the entire N1MM log ADIF?

Thank you in advance - Hunter K3IE



Re: Logger32 - Adding N1MM ADIF Column for QSO Party Rover Log

Bob
 

See the picture at the bottom of page 82 of the help file. Pick one of the three user fields where you want to store the data from the N1MM and type in APP_N1MM_ROVERCNTY then click APPLY. Go to the Logbook Page Window and make the USER_x column visible. Or something like that. SeventyThree(s).

On 04/27/2022 2:49 PM Hunter - K3IE <hunter.k3ie@...> wrote:


Hoping someone here can give me a suggestion - 

One of our TCG club members participated as a Rover in the recent GA QSO Party using N1MM Contest Logger and our club call K4TCG.  

I am the new QSL manager for our club call and was hoping to use the Logger32/LogPrint tandem to print the QSL labels for this and future club call events.  However, I cannot figure out a way to add the N1MM ADIF county column "APP_N1MM_ROVERCNTY" to the Logger32 software.  I have successfully built the LogPrint Custom label layout, which includes this N1MM County Column, and am able to generate correct multi QSO labels directly from the N1MM ADIF file en masse.   But, I was hoping to use Logger32 to pick and choose what call labels to print and export that ADIF file to LogPrint instead of all the calls coming over at once.  

Was also wondering if this is necessary or is there a way to have LogPrint extract call specific entries and from the entire N1MM log ADIF?

Thank you in advance - Hunter K3IE



Logger32 - Adding N1MM ADIF Column for QSO Party Rover Log

Hunter - K3IE
 

Hoping someone here can give me a suggestion - 

One of our TCG club members participated as a Rover in the recent GA QSO Party using N1MM Contest Logger and our club call K4TCG.  

I am the new QSL manager for our club call and was hoping to use the Logger32/LogPrint tandem to print the QSL labels for this and future club call events.  However, I cannot figure out a way to add the N1MM ADIF county column "APP_N1MM_ROVERCNTY" to the Logger32 software.  I have successfully built the LogPrint Custom label layout, which includes this N1MM County Column, and am able to generate correct multi QSO labels directly from the N1MM ADIF file en masse.   But, I was hoping to use Logger32 to pick and choose what call labels to print and export that ADIF file to LogPrint instead of all the calls coming over at once.  

Was also wondering if this is necessary or is there a way to have LogPrint extract call specific entries and from the entire N1MM log ADIF?

Thank you in advance - Hunter K3IE



Re: VE8AT NCDXF Beacon

Bob
 

It is moved. Guess I missed the memo. SeventyThree(s).



On 04/26/2022 9:39 AM Michael Harris via groups.io <mike.harris@...> wrote:


Hi,

The beacon is incorrectly located on the L32 NCDXF beacons map.

From the Northern Alberta Radio Club web site:

<snip>
The beacon was destined to be installed at CFS Alert, at the northern
tip of Ellesmere Island, but security concerns on the military
installation made a relocation to Eureka close to 500 km to the
southwest necessary.

It now has a new loaction as of Feburary 2021 at Inuvik. NWT, Canada

68°18'26.4"N 133°29'21.1"W

68.307333, -133.489194
<unsnip>

It would be useful if this could be corrected for those of us who
monitor the beacons.

Regards,

Mike VP8NO



VE8AT

Michael Harris
 

Further to my first email.

NCDXF also lists the beacon at CP38gh Inuvik NT

Regards,

Mike VP8NO


VE8AT NCDXF Beacon

Michael Harris
 

Hi,

The beacon is incorrectly located on the L32 NCDXF beacons map.

From the Northern Alberta Radio Club web site:

<snip>
The beacon was destined to be installed at CFS Alert, at the northern tip of Ellesmere Island, but security concerns on the military installation made a relocation to Eureka close to 500 km to the southwest necessary.

It now has a new loaction as of Feburary 2021 at Inuvik. NWT, Canada

68°18'26.4"N 133°29'21.1"W

68.307333, -133.489194
<unsnip>

It would be useful if this could be corrected for those of us who monitor the beacons.

Regards,

Mike VP8NO


Re: Help trying to adjust the log with other programs.

Gary Hinson <Gary@...>
 

Hello Tuka.

 

You are right: there is information in the manual but it is quite complicated. 

 

I would start with LoTW, one of the most valuable online logs for DXers.   My ‘new user guide’ for LoTW is available in Portuguese: https://www.g4ifb.com/LoTW_New_User_Guide_Portuguese.pdf

 

You can export your log from Logger32 as an ADIF file (see section 3.2 of the Logger32 User Manual), then sign and upload it to LoTW using the TQSL program. 

 

Logger32 can send new QSOs to LoTW using an extra program – “L32LogSync” from Rick N2AMG  (see section 17.2).  It can send QSOs in groups (e.g. all the QSOs you have made this month) or individually as they are logged.  See https://www.n2amg.com/software/l32-logsync/

 

L32LogSync can also upload your QSOs to eQSL, Club Log, HRDLOG and QRZ.com, and to websites and cloud storage:

 

 

Click to tick the ones you want to use under Program Setup, then configure them using the tabs that appear.  Again, you will need to set up your accounts for these online logging services first.

 

73 GL

Gary  (Hawkes Bay NZ)

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of antonio carlos rodrigues via groups.io
Sent: Monday, 25 April 2022 12:21 pm
To: Hanlogger <hamlogger@groups.io>
Subject: [hamlogger] Help trying to adjust the log with other programs.

 

Good evening everyone.

I'm trying to automate the logger32 with all the programs we have available ( qrz.com, lotw,e-qsl, hrdlog , etc...) but I'm having some difficulties, I already asked for this help and a colleague posted that the manul would have the information but with running time I didn't find it and I'm also not concegindo to do it, could someone help me with some tip or information.

and also how to separate the cw and ssb contacts to updy the log

Thank you for the help and I apologize for the poor English

73dx

Tuka py2bn

Americana -sp

Brazil


Help trying to adjust the log with other programs.

antonio carlos rodrigues
 

Good evening everyone.
I'm trying to automate the logger32 with all the programs we have available ( qrz.com, lotw,e-qsl, hrdlog , etc...) but I'm having some difficulties, I already asked for this help and a colleague posted that the manul would have the information but with running time I didn't find it and I'm also not concegindo to do it, could someone help me with some tip or information.
and also how to separate the cw and ssb contacts to updy the log
Thank you for the help and I apologize for the poor English
73dx
Tuka py2bn
Americana -sp
Brazil

1741 - 1760 of 90023