Date   

Re: Check Call Pertial

Vince Shirley
 

Hi Rob,

Sorry, not for me.  

I'm sick of being called G0ORH because that's what these partial call gizmos do when they enter the first three characters of my call.

Vince G0ORC

On Mon, 31 Jan 2022 at 10:02, Rob <g4ujs@...> wrote:
Hi All,

Aki JA1NLX has re-written his utility program CheckCallPArtial after I made a few comments on his original version.

The utility (v2.01) is an excellent utility for Logger32 and integrates seamlessly.

The utility works in the same way a Super Check Partial found in Contest loggers like N1MM and for Logger32 users it is especially useful if running a pileup or casually operating during a contest.

The utility can be downloaded here: Utility program for Logger32 (fc2.com)

Hope you find it useful, I do!!!

73 de Rob G4UJS

 


Check Call Pertial

Rob
 

Hi All,

Aki JA1NLX has re-written his utility program CheckCallPArtial after I made a few comments on his original version.

The utility (v2.01) is an excellent utility for Logger32 and integrates seamlessly.

The utility works in the same way a Super Check Partial found in Contest loggers like N1MM and for Logger32 users it is especially useful if running a pileup or casually operating during a contest.

The utility can be downloaded here: Utility program for Logger32 (fc2.com)

Hope you find it useful, I do!!!

73 de Rob G4UJS

 


Re: Subscription

 

Ok Aki, I understand, I am really interested in joint this group.

Thanks a lot 73

Juan Herrera. HK6J

Enviado desde mi iPhone

El 29/01/2022, a la(s) 7:48 p.m., ja1nlx <ayoshida0205@...> escribió:

Juan

Welcome !
Please understand to use English for everyone to understand.

73 de aki
JA1NLX

------ Original Message ------
From: "Juano" <juano9876@...>
To: "hamlogger@groups.io" <hamlogger@groups.io>
Sent: 2022/01/30 9:43:00
Subject: [hamlogger] Subscription

Hola, mi nombre es Juan Herrera R HK6J, SI estoy interesado en pertenecer a este grupo, gracias por la invitación y por aceptarme.

73 Juan Herrera

Enviado desde mi iPhone








Re: Subscription

ja1nlx
 

Juan

Welcome !
Please understand to use English for everyone to understand.

73 de aki
JA1NLX

------ Original Message ------
From: "Juano" <juano9876@...>
To: "hamlogger@groups.io" <hamlogger@groups.io>
Sent: 2022/01/30 9:43:00
Subject: [hamlogger] Subscription

Hola, mi nombre es Juan Herrera R HK6J, SI estoy interesado en pertenecer a este grupo, gracias por la invitación y por aceptarme.

73 Juan Herrera

Enviado desde mi iPhone




Subscription

 

Hola, mi nombre es Juan Herrera R HK6J, SI estoy interesado en pertenecer a este grupo, gracias por la invitación y por aceptarme.

73 Juan Herrera

Enviado desde mi iPhone


Re: Windows 10 64 home and only 1 port. How do you get enough ports to setup logger32? SOLVED WITH GB7UJS IP Address 217.35.93.140 with port 7373

Jeff King ZL4AI
 

Thank you for all replies which have helped and now solved the problem i was having.
As I am completely new to the program I anticipated that Logger32 would function right away.

The Cluster message 2nd on the bottom ribbon said No Com Port: This miss-lead me to thinking that one must have a com port to access the cluster and the lack of com port was the root cause of no connection.

The combination replies  has helped in the following ways to solve the problem:
  • Bob K4CY: "If your PC is connected to the internet, you need no additional hardware" confirmed I was on the wrong track  about the no com port message,

        The manual on page 232 to 233 infers just click on the default set up which was G4UJS and you will connect. I did this and no connection happened!  
        The manual does not explain or cross reference at this critical point how you set up a connection.  


  • Gerald, VE1DT: Explained how you setup a Cluster connection: "Assuming that you have a working internet connection on the laptop, then you already have all of hardware you require. Have you gotten as far as trying to use the Telnet feature in L32? Open the L32 Telnet window and under Setup on that Window, go into "Remote Hosts" and select a DX cluster and go from there.

  • Rob G4UJS:  Supplied a (new) address 217.35.93.140   with port 7373,  (which is different to the default address already setup in Version 4.0 of the program).  This new address enabled a connection.

  • Ken ZL4NR: for moral support
Thank your for all your replies.

They have enabled me to get Logger 32 functioning.

Very 73s yours sincerely
from Jeff ZL4AI  in the South Pacific


Re: windows 10 64 home and only 1 port. How do you get enough ports to setup logger32?

Rob
 

You do not need a com port for telnet to access the DX Cluster, as long as your PC is connected to the internet.

Try GB7UJS

on

gb7ujs.ham-radio-op.net    with port 7373   

or 

IP Address 217.35.93.140    with port 7373

Regards Rob G4UJS


On Sat, Jan 29, 2022 at 04:10 PM, Gerald Boutin wrote:
On Sat, Jan 29, 2022 at 10:46 AM, Jeff King wrote:

My problem is Logger32 requires a com port to run the DX clusters and Telnet connection to obtain the information of who is on the bands.

 

I presume this is must be a com port that accesses to TCIP.

I do not know how to add a com port to get Telnet to function.

Jeff,

Telnet connection to DX cluster does NOT require any com ports. The connection is over the internet connection.

Assuming that you have a working internet connection on the laptop, then you already have all of hardware you require. Have you gotten as far as trying to use the Telnet feature in L32? Open the L32 Telnet window and under Setup on that Window, go into "Remote Hosts" and select a DX cluster and go from there.


 
--
Gerald, VE1DT


Re: windows 10 64 home and only 1 port. How do you get enough ports to setup logger32?

Gerald Boutin
 

On Sat, Jan 29, 2022 at 10:46 AM, Jeff King wrote:

My problem is Logger32 requires a com port to run the DX clusters and Telnet connection to obtain the information of who is on the bands.

 

I presume this is must be a com port that accesses to TCIP.

I do not know how to add a com port to get Telnet to function.

Jeff,

Telnet connection to DX cluster does NOT require any com ports. The connection is over the internet connection.

Assuming that you have a working internet connection on the laptop, then you already have all of hardware you require. Have you gotten as far as trying to use the Telnet feature in L32? Open the L32 Telnet window and under Setup on that Window, go into "Remote Hosts" and select a DX cluster and go from there.


 
--
Gerald, VE1DT


Re: windows 10 64 home and only 1 port. How do you get enough ports to setup logger32?

Peter Eckersberger
 

Hi Jeff,

How about using an USB hub? That might be useful for you. Look at AMAZON...

<https://www.amazon.com/s?k=usb+hub+for+pc&rh=n%3A172456%2Cn%3A17387627011&dc&language=de&crid=RCUIZDQ77OZQ&qid=1643470289&rnid=2941120011&sprefix=usb+hub%2Caps%2C155&ref=sr_nr_n_2>


73 de Peter, OE3EPW

AR  SK


Am 29.01.2022 um 15:46 schrieb Jeff King:

from:   https://www.qrz.com/db/ZL4AI

Hi Bob and Dave,

 

Thanks for your replies. Mabuhay greetings from the South Pacific.

 

First off I have a laptop with a Win 10 64  home system.

 

This has a TS-590SG connected and only shows only one com port #5 on the Silicon Devices driver Kenwood required to be installed.

When I looked at hidden ports on the Device Manager a hidden com port  #4 shows but this is not available as a port for use with Logger32.

When I tried renumbering com4 to com 64 with regedit.com and then returning it com4,  com4 disappeared completely from the Device Manager.

 

I have no other USB device plugged in.

When I plug in a USB to Com Port adapter that device will appear in the Device Manager com ports list.

 

My problem is Logger32 requires a com port to run the DX clusters and Telnet connection to obtain the information of who is on the bands.

 

I presume this is must be a com port that accesses to TCIP.

I do not know how to add a com port to get Telnet to function.

 

I am asking for advice on how to do this???

 

I am on the point of giving up; But would really like to use Logger32 because it has special features of identifying un-worked countries and links to multiple awards data bases that would be really useful. But if I cannot get the link to clusters and Tenet I cannot use these features

 

Any advice on how to access Telnet would be really appreciated.

 

Yours sincerely

Jeff King ZL4AI in the South Pacific

 

 

 

 

 

 

 

 

 

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of David KN2M
Sent: Sunday, 30 January 2022 02:14
To: hamlogger@groups.io
Subject: Re: [hamlogger] windows 16 64 home and only 1 port. How do you get enough ports to setup logger32?

 

Kia ora.
May I presume you are asking the question of a computer with lots of USB ports but only one built in serial port?  I have done this with individual USB => serial port adapters for each USB OR a multiple serial port adapter.  My main computer at my remote station has about 15 serial ports of one type or another.  I have an 8 serial port box there which uses only one USB.  Dave


Re: windows 10 64 home and only 1 port. How do you get enough ports to setup logger32?

Jan <hamlogger@...>
 

Jeff

Why using regedit to change the comport?
You can do this in the device manager
Go to the hidden com port 4 and the do a right click
Go to properties
The open the second tab
Go to advanced
Then in the next window you can change the comport

73
Jan
PA4JJ


Op 29-1-2022 om 15:46 schreef Jeff King:

from:   https://www.qrz.com/db/ZL4AI

Hi Bob and Dave,

 

Thanks for your replies. Mabuhay greetings from the South Pacific.

 

First off I have a laptop with a Win 10 64  home system.

 

This has a TS-590SG connected and only shows only one com port #5 on the Silicon Devices driver Kenwood required to be installed.

When I looked at hidden ports on the Device Manager a hidden com port  #4 shows but this is not available as a port for use with Logger32.

When I tried renumbering com4 to com 64 with regedit.com and then returning it com4,  com4 disappeared completely from the Device Manager.

 

I have no other USB device plugged in.

When I plug in a USB to Com Port adapter that device will appear in the Device Manager com ports list.

 

My problem is Logger32 requires a com port to run the DX clusters and Telnet connection to obtain the information of who is on the bands.

 

I presume this is must be a com port that accesses to TCIP.

I do not know how to add a com port to get Telnet to function.

 

I am asking for advice on how to do this???

 

I am on the point of giving up; But would really like to use Logger32 because it has special features of identifying un-worked countries and links to multiple awards data bases that would be really useful. But if I cannot get the link to clusters and Tenet I cannot use these features

 

Any advice on how to access Telnet would be really appreciated.

 

Yours sincerely

Jeff King ZL4AI in the South Pacific

 

 

 

 

 

 

 

 

 

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of David KN2M
Sent: Sunday, 30 January 2022 02:14
To: hamlogger@groups.io
Subject: Re: [hamlogger] windows 16 64 home and only 1 port. How do you get enough ports to setup logger32?

 

Kia ora.
May I presume you are asking the question of a computer with lots of USB ports but only one built in serial port?  I have done this with individual USB => serial port adapters for each USB OR a multiple serial port adapter.  My main computer at my remote station has about 15 serial ports of one type or another.  I have an 8 serial port box there which uses only one USB.  Dave


-- 
____________________________________________________
my dxspider clusters running on a raspberry pi:  
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388


Re: windows 10 64 home and only 1 port. How do you get enough ports to setup logger32?

Jeff King ZL4AI
 

from:   https://www.qrz.com/db/ZL4AI

Hi Bob and Dave,

 

Thanks for your replies. Mabuhay greetings from the South Pacific.

 

First off I have a laptop with a Win 10 64  home system.

 

This has a TS-590SG connected and only shows only one com port #5 on the Silicon Devices driver Kenwood required to be installed.

When I looked at hidden ports on the Device Manager a hidden com port  #4 shows but this is not available as a port for use with Logger32.

When I tried renumbering com4 to com 64 with regedit.com and then returning it com4,  com4 disappeared completely from the Device Manager.

 

I have no other USB device plugged in.

When I plug in a USB to Com Port adapter that device will appear in the Device Manager com ports list.

 

My problem is Logger32 requires a com port to run the DX clusters and Telnet connection to obtain the information of who is on the bands.

 

I presume this is must be a com port that accesses to TCIP.

I do not know how to add a com port to get Telnet to function.

 

I am asking for advice on how to do this???

 

I am on the point of giving up; But would really like to use Logger32 because it has special features of identifying un-worked countries and links to multiple awards data bases that would be really useful. But if I cannot get the link to clusters and Tenet I cannot use these features

 

Any advice on how to access Telnet would be really appreciated.

 

Yours sincerely

Jeff King ZL4AI in the South Pacific

 

 

 

 

 

 

 

 

 

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of David KN2M
Sent: Sunday, 30 January 2022 02:14
To: hamlogger@groups.io
Subject: Re: [hamlogger] windows 16 64 home and only 1 port. How do you get enough ports to setup logger32?

 

Kia ora.
May I presume you are asking the question of a computer with lots of USB ports but only one built in serial port?  I have done this with individual USB => serial port adapters for each USB OR a multiple serial port adapter.  My main computer at my remote station has about 15 serial ports of one type or another.  I have an 8 serial port box there which uses only one USB.  Dave


Re: windows 16 64 home and only 1 port. How do you get enough ports to setup logger32?

David KN2M
 

Kia ora.
May I presume you are asking the question of a computer with lots of USB ports but only one built in serial port?  I have done this with individual USB => serial port adapters for each USB OR a multiple serial port adapter.  My main computer at my remote station has about 15 serial ports of one type or another.  I have an 8 serial port box there which uses only one USB.  Dave


Re: windows 16 64 home and only 1 port. How do you get enough ports to setup logger32?

Bob
 

How 'bout using a Telnet connection to a DX Cluster? If your PC is connected to the internet, you need no additional hardware. If you 'really' want more ports (I assume you mean RS232 serial ports), then you need to beg/borrow/steal USB to serial port adapters. SeventyThree(s).

On 01/29/2022 12:34 AM Jeff King <jking2603@...> wrote:


windows 16 64 home and only 1 port. How do you get enough ports to setup logger32?

I cannot get the clusters to open because i do not have another port.
Is it possible to get Logger32 operating on windows 64 and 1 port?
Please provide help on how to?

From ZL4AI


windows 16 64 home and only 1 port. How do you get enough ports to setup logger32?

Jeff King ZL4AI
 

windows 16 64 home and only 1 port. How do you get enough ports to setup logger32?

I cannot get the clusters to open because i do not have another port.
Is it possible to get Logger32 operating on windows 64 and 1 port?
Please provide help on how to?

From ZL4AI


Re: File not found???

Ray, W4BYG <w4byg@...>
 

Gary,
Thank you.
73,
Ray, W4BYG

On 1/27/2022 15:45, Gary Hinson wrote:

Ray, try  https://www.logger32.net/files/Logger32_v4_User_Manual.pdf

 

73

Gary  ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Ray, W4BYG
Sent: Friday, 28 January 2022 8:53 am
To: hamlogger@groups.io
Subject: [hamlogger] File not found???

 

On 6/24/21 Bob wrote:

JT-Alert / Grid Tracker launch with Logger32 and WSJT-X? 2 messages For JTAlert configuration, look at section 32.3 of the help file. For Grid track look at section 15.10 of the help file. SeventyThree(s). The current help file is at: https://www.logger32.net/files/Lo

When I try https://www.logger32.net, I get "File not found"

What am I doing wrong?
Ray, W4BYG

-- 
"If you want to build a strong house, I'll give you my engineer's number. 
If you want to build a strong life, I'll introduce you to my carpenter."
  Lebron and Heather Lackey

 

Virus-free. www.avg.com


-- 
"If you want to build a strong house, I'll give you my engineer's number. 
If you want to build a strong life, I'll introduce you to my carpenter."
  Lebron and Heather Lackey


Re: File not found???

Gary Hinson <Gary@...>
 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Ray, W4BYG
Sent: Friday, 28 January 2022 8:53 am
To: hamlogger@groups.io
Subject: [hamlogger] File not found???

 

On 6/24/21 Bob wrote:

JT-Alert / Grid Tracker launch with Logger32 and WSJT-X? 2 messages For JTAlert configuration, look at section 32.3 of the help file. For Grid track look at section 15.10 of the help file. SeventyThree(s). The current help file is at: https://www.logger32.net/files/Lo

When I try https://www.logger32.net, I get "File not found"

What am I doing wrong?
Ray, W4BYG

-- 
"If you want to build a strong house, I'll give you my engineer's number. 
If you want to build a strong life, I'll introduce you to my carpenter."
  Lebron and Heather Lackey

 

Virus-free. www.avg.com


Re: Failed to open Serial Rotor Port

Fabio Benedetti
 

Hi everybody!

Finally solved !

After a few hours of trying i did a fresh install of the software on a new pc and the rotor works, then i copied all the files from the new pc to the old pc and luckily everything worked out!
I ran a file comparison and found a difference in the executable file, after a negative virus scan I think it is possible a hard disk error due to a blackout occurred in the previous days.

Thank everyone for the interest and I wish you all the best.

'73 de iw2fut - Fabio (aka Fabiowsky)



File not found???

Ray, W4BYG <w4byg@...>
 

On 6/24/21 Bob wrote:

JT-Alert / Grid Tracker launch with Logger32 and WSJT-X? 2 messages For JTAlert configuration, look at section 32.3 of the help file. For Grid track look at section 15.10 of the help file. SeventyThree(s). The current help file is at: https://www.logger32.net/files/Lo

When I try
https://www.logger32.net, I get "File not found"

What am I doing wrong?
Ray, W4BYG
-- 
"If you want to build a strong house, I'll give you my engineer's number. 
If you want to build a strong life, I'll introduce you to my carpenter."
  Lebron and Heather Lackey

Virus-free. www.avg.com


Re: Failed to open Serial Rotor Port

Jan <hamlogger@...>
 

Fabio

Look also in the setup bands and modes if you have the correct corresponding rotor number checked

73
Jan
PA4JJ

Op 27-1-2022 om 10:01 schreef Fabio Benedetti:
Hi Nick and many thanks for the reply.

Tonight I will also check this configuration as possible that there is some conflict

Ciao and '73 de iw2fut - Fabio (aka Fabiowsky)

Il giorno gio 27 gen 2022 alle ore 09:53 NICK K. PLUMIDAKIS <sv1vs@...> ha scritto:

Dear Fabio Hi.

I am running 2 PRO.SIS.TEL rotators with the L32 with your settings and they are working perfect.

Check that you are not using any other program with the com. Port that you are using with the L32 simultaneously.

If for example you ate using the rotator program with the L32 at the same time , then one of them will be not working.

 

STAY SAFE

My Best 73’s

DE

Nick

SV1VS

 

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Fabio Benedetti
Sent: Thursday, 27 January, 2022 09:42
To: hamlogger@groups.io
Subject: Re: [hamlogger] Failed to open Serial Rotor Port

 

Thanks Bob for the reply
Tonight I'll check the configuration and then I'll tell you.

But as my daughter says "Dad you're getting old" I think I made some mistakes.

 

Best regards

 

'73 de iw2fut - Fabio (aka Fabiowsky)

 

Il giorno mer 26 gen 2022 alle ore 22:50 Bob <k4cy@...> ha scritto:

Read section 41.2 (page 723) of the help file. SeventyThree(s).

On 01/26/2022 2:24 PM Fabio Benedetti <iw2fut@...> wrote:

 

 

Hi Bob!

 

Many thanks for the answer.

The serial port is Com1 and is shown in list, as shown in the following picture.

But when i apply the configuration nothing happens and the rotor is not detected.

For info, it appears that the software is not enabled to write the configuration file even if the user is a system administrator.

 

image.png

 

This is an excerpt from Logger32 file:

 

image.png

 

Option OpernPOrt is disabled.

 

image.png

 

This is my configuration set:

 

image.png

 

image.png

 

This is the sad message from Logger32:

image.png

 

And this is Pro.Sis.Tel software in action...

 

image.png

 

And as I wrote also with HRD the rotor works.

Thanks for your interest.

Best regards.

 

'73 de iw2fut Fabio (aka Fabiowsky)

 

 

Il giorno mer 26 gen 2022 alle ore 00:04 Bob <k4cy@...> ha scritto:

Please describe Does not detect the rotor serial port and fail to configure it in detail. Do you mean you have a serial port (for example) Com 8, but when you go to setup your rotor, there is no Com 8 on the list of available ports? SeventyThree(s).

On 01/25/2022 5:40 PM Fabio Benedetti <iw2fut@...> wrote:

 

 

[Edited Message Follows]

Hi everybody!
My Logger32 software have a strange issue.

Does not detect the rotor serial port and fail to configure it.

The rotor is Prosistel D and works well with other programs such as HRD and N1MM.

Anyone know how to fix it?

Many thanks and '73 de iw2fut - Fabio (aka Fabiowsky)

 

 


-- 
____________________________________________________
my dxspider clusters running on a raspberry pi:  
pa4jj-2 83.162.186.242 port 7300
pa4jj-3 83.162.186.242 port 7388


Re: Failed to open Serial Rotor Port

Fabio Benedetti
 

Hi Nick and many thanks for the reply.

Tonight I will also check this configuration as possible that there is some conflict

Ciao and '73 de iw2fut - Fabio (aka Fabiowsky)

Il giorno gio 27 gen 2022 alle ore 09:53 NICK K. PLUMIDAKIS <sv1vs@...> ha scritto:

Dear Fabio Hi.

I am running 2 PRO.SIS.TEL rotators with the L32 with your settings and they are working perfect.

Check that you are not using any other program with the com. Port that you are using with the L32 simultaneously.

If for example you ate using the rotator program with the L32 at the same time , then one of them will be not working.

 

STAY SAFE

My Best 73’s

DE

Nick

SV1VS

 

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Fabio Benedetti
Sent: Thursday, 27 January, 2022 09:42
To: hamlogger@groups.io
Subject: Re: [hamlogger] Failed to open Serial Rotor Port

 

Thanks Bob for the reply
Tonight I'll check the configuration and then I'll tell you.

But as my daughter says "Dad you're getting old" I think I made some mistakes.

 

Best regards

 

'73 de iw2fut - Fabio (aka Fabiowsky)

 

Il giorno mer 26 gen 2022 alle ore 22:50 Bob <k4cy@...> ha scritto:

Read section 41.2 (page 723) of the help file. SeventyThree(s).

On 01/26/2022 2:24 PM Fabio Benedetti <iw2fut@...> wrote:

 

 

Hi Bob!

 

Many thanks for the answer.

The serial port is Com1 and is shown in list, as shown in the following picture.

But when i apply the configuration nothing happens and the rotor is not detected.

For info, it appears that the software is not enabled to write the configuration file even if the user is a system administrator.

 

image.png

 

This is an excerpt from Logger32 file:

 

image.png

 

Option OpernPOrt is disabled.

 

image.png

 

This is my configuration set:

 

image.png

 

image.png

 

This is the sad message from Logger32:

image.png

 

And this is Pro.Sis.Tel software in action...

 

image.png

 

And as I wrote also with HRD the rotor works.

Thanks for your interest.

Best regards.

 

'73 de iw2fut Fabio (aka Fabiowsky)

 

 

Il giorno mer 26 gen 2022 alle ore 00:04 Bob <k4cy@...> ha scritto:

Please describe Does not detect the rotor serial port and fail to configure it in detail. Do you mean you have a serial port (for example) Com 8, but when you go to setup your rotor, there is no Com 8 on the list of available ports? SeventyThree(s).

On 01/25/2022 5:40 PM Fabio Benedetti <iw2fut@...> wrote:

 

 

[Edited Message Follows]

Hi everybody!
My Logger32 software have a strange issue.

Does not detect the rotor serial port and fail to configure it.

The rotor is Prosistel D and works well with other programs such as HRD and N1MM.

Anyone know how to fix it?

Many thanks and '73 de iw2fut - Fabio (aka Fabiowsky)

 

 

2641 - 2660 of 90097