|
Re: SV2RSG/A
Fabio IZ8MBW
Resident doesn't mean always active on air.
toggle quoted messageShow quoted text
Anyway you are free to send an Email to that monk and ask why he is on air only in that specific dates. Provide us the answer so we can provide info to Club Log to do a fine tuning on that exception. 73s
|
|
|
|
Re: DX Spot No QSY Radio.
Bob
When operating with JTDX, look at the radio pane of the Logger32 lower status bar. You will see that the Logger32 radio port is closed. SeventyThree(s).
|
|
|
|
DX Spot No QSY Radio.
G4GIR
Hello All
I have a setup using JTDX, L32 and TS990. If I click on a Band in the JTDX Control panel, the Radio QSY's, JTDX QSY's and L32 logging window QSY's. If I click on a Frequency in JTDX the Radio QSY's, JTDX QSY's and L32 logging window QSY's. However If I click on a DX spot L32 Logging window populates with the Call and QRG, the radio doesn't QSY and JTDX doesn't QSY. Is this correct? Tried to find an answer in the manual but no luck. Clicking on DX Spots when just using the Radio and L32 works OK. Radio QSY's and L32 Logging widow is populated with call and QRG. Any ideas please. 73 Ian G4GIR
|
|
|
|
Re: SV2RSG/A
John Owens
Glorioso was my last one also. Got FT5GA in 2009. Not easy with only one contact made and confirmed after many days and hours of operation. Problem with it and other FT/s surrounding Madagascar is that the French control all of that area, declaring most of it as military and not accessible for anybody but the French. Bouvet may happen in the next couple of years. I have been #1 HR since 2009 and that was done in 18 years. Couldn't do that now. Good thing as I am now 83YO. - John Owens - N7TK
On Tue, Oct 12, 2021 at 10:53 AM Rick Williams - VE7TK via groups.io <ve7tk=yahoo.ca@groups.io> wrote: Actually no on P5. I have P5/4L4FN confirmed/awarded.
|
|
|
|
Re: SV2RSG/A
Paul F6EXV
The monk is a resident, and is active occasionnally....
toggle quoted messageShow quoted text
Le 12/10/2021 à 17:22, Fabio IZ8MBW via
groups.io a écrit :
|
|
|
|
Re: SV2RSG/A
Actually no on P5. I have P5/4L4FN confirmed/awarded.
I still need 3Y0 and FR/G (Glorioso Is.). I know - how did I miss Glorioso? 73, Rick VE7TK
|
|
|
|
Re: SV2RSG/A
Panos
Hi in my log the SV2RSG/A & SV2ASP/A calls looks ok, country: SV/A. I didn't changed country manually 73
|
|
|
|
Re: SV2RSG/A
Fabio IZ8MBW
Club Log respect what is the plan. If this station will be active up to 14 October, the exception is valid up to 14 October. 73 Fabio, IZ8MBW
On Tuesday, October 12, 2021, 05:04:24 PM GMT+2, Paul F6EXV <f6exv@...> wrote:
This is only for the current operation, but SV2RSG/A, operated by
the monk, is always Mount Athos. So why make such an exception ? If he is in Greece, he will not have the /A 73 Paul F6EXV Le 12/10/2021 à 16:54, Bob a écrit :
|
|
|
|
Re: SV2RSG/A
Bob
I don't make the rules, I just try to follow them. Club Log says SV2RSG is not a valid call since April 21, 2016.
<invalid record='44908'>
<call>SV2RSG</call> <start>2016-04-21T00:00:00+00:00</start> </invalid>
SeventyThree(s).
|
|
|
|
Re: SV2RSG/A
Paul F6EXV
This is only for the current operation, but SV2RSG/A, operated by
the monk, is always Mount Athos. So why make such an exception ?
toggle quoted messageShow quoted text
If he is in Greece, he will not have the /A 73 Paul F6EXV
Le 12/10/2021 à 16:54, Bob a écrit :
|
|
|
|
Re: SV2RSG/A
Bob
And now it is in the Club Log cty.xml download:
<exception record='49217'>
<call>SV2RSG/A</call> <entity>MOUNT ATHOS</entity> <adif>180</adif> <cqz>20</cqz> <cont>EU</cont> <long>24.21</long> <lat>40.27</lat> <start>2021-10-10T00:00:00+00:00</start> <end>2021-10-14T23:59:59+00:00</end> </exception>
It will disappear again with the Friday Club Log update. SeventyThree(s).
|
|
|
|
SV2RSG/A
Bob
It would appear that Mt Athos did not magically appear with this mornings Club Log download. Go here:
Type in <SV2RSG> (including the < and >) and click the ADD button at the left of where you typed. With luck, you will now see this:
Just remember when the insanity is over, go back and delete <SV2RSG/A> as an alternate prefix for Mt. Athos.
SeventyThree(s).
|
|
|
|
Re: Logger32
Bob
First, let's try to understand what you're trying to achieve ... If you have not installed Logger32 on your PC, you must do so. Go to Logger32.net and at the top right corner you will see a link to Logger32 full v4.0 download.Click that an the Logger32 full install package will be downloaded. It contains a single file Logger32 v4.0 Full Install.exe. Run this and it will install Logger32 on your PC. ... o
r, maybe you're trying to domething else. SeventyThree(s).
|
|
|
|
Re: Logger32
Michael Harris
The current version is 4.0.277 just checked.
toggle quoted messageShow quoted text
For what it is worth this version runs OK as a log backup on my Toshiba NB510 Netbook with windows 7 Starter. Nothing too demanding just log page, log entry, previous QSOs and worked/confirmed. Regards, Mike VP8NO
On 12/10/2021 08:25, Panos wrote:
Hi unless you have a very old computer or O.S., you can try to install the current version 4. 73
|
|
|
|
Re: Logger32
Panos
Hi unless you have a very old computer or O.S., you can try to install the current version 4. 73
|
|
|
|
Re: Logger32
Mike HARDY <mikehardy124@...>
Thanks Aki,
The error message has changed to ‘SCom32x.ocx’. tried version 3.5 same error messages.
73, G4FHQ - Mike
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of ja1nlx
Sent: 12 October 2021 09:01 To: hamlogger@groups.io Subject: Re: [hamlogger] Logger32
Mike
What file did you download ? What .exe file you hit ?
73 de aki JA1NLX
------ Original message ------ From: "Mike HARDY via groups.io" <mikehardy124@...> Date: 2021/10/12 16:52:59 Subject [hamlogger] Logger32
|
|
|
|
Re: Logger32
ja1nlx
Mike What file did you download ? What .exe file you hit ?
73 de aki JA1NLX
------ Original message ------
From: "Mike HARDY via groups.io" <mikehardy124@...>
Date: 2021/10/12 16:52:59
Subject [hamlogger] Logger32
|
|
|
|
Logger32
Mike HARDY <mikehardy124@...>
Hi,
New to the group. Have been trying to download the above from the net, unzip ok but when hitting the .exe files I get an error message “excel.ocx not correctly registered, a file is missing or invalid” tried on three downloads from the net and get similar error messages. Running W10 on an i5 processer.
Help needed please.
Mike G4FHQ.
|
|
|
|
Sequencing and Color Questions
Bob, W3IDT
As these questions may be about the interface between Logger32 and JTDX, I'm taking the liberty of posting in both reflectors.
I have tried to look at the various manuals, guides, and reflectors, but either couldn't find answers or miss-read the material. 1. Sequencing Question ---------------------- With "manual logging" in place, the following happens: 1a. I click on a CQ station on the (JTDX) Band Activity panel, and that station gets called. 1b. After working him, I get the manual log panel (as desired). 1c. I click "LOG", 1d. THEN Tx6 - my CQ message - is automatically transmitted. I DO NOT want to CQ; I'm DXing. How do I prevent the Tx6 from being transmitted? 2. Color Question ----------------- Colors on the (JTDX) Band Activity Panel: 2a. Using [menu] FILE | SETTINGS | NOTIFICATIONS I've set up a desired color scheme: - Blues for new CQZ and ITUZ (dark for Ever new, light for band/mode new), - Greens for new Countries (Green - as in GO), Also dark for Ever new, light for band/mode new. - and Strike-out for worked already. 2b. Blues and strike-out seem to work fine, but 2c. I get Greens for countries - already Ever worked , - worked on this band/mode, and - even sometimes for calls worked before on this band/mode. How do the color settings interact with the log? How do I get only Green for new (ever or band/mode)? Thank you. Bob, w3idt ps.Having lots of fun with Logger32 and JTDX. Now on to learn about "Cherry Picking" -- ....... . Robert F. Teitel, W3IDT . . w3idt@... . w3idt@... ........
|
|
|
|
Re: SV2RSG/A
Dave Colliau
Ive got monk apollo confirmed ssb cw and rtty . Need P5 ,FT5/x and BS7
Dave N8DC
|
|
|