Date   

Re: Cherry picking

Bob
 

On the UDP BandMap, click CONFIG | SHOW/BLOCK CALLSIGNS QSOD BEFORE Check the menu SHOW/BLOCK CALLSIGNS THIS BAND BEFORE. Is this what you're looking for? SeventyThree(s).

On 07/25/2021 4:28 AM Luis EA5L via groups.io <ea5l@...> wrote:
 
 
I want that when I have a station worked on the same band in ft8, it doesn't work in ft4 but cherry picking calls it, I've looked for it but I don't know if it's possible.
I don't need the same station on the same band on ft8 and ft4. I am satisfied with a single digital mode.
I will take out the chainsaw L32.
Greetings.
Luis EA5L


Re: Cherry picking

Luis EA5L
 

I want that when I have a station worked on the same band in ft8, it doesn't work in ft4 but cherry picking calls it, I've looked for it but I don't know if it's possible.
I don't need the same station on the same band on ft8 and ft4. I am satisfied with a single digital mode.
I will take out the chainsaw L32.
Greetings.
Luis EA5L


Grid square

la4wka
 

Hello group

Did something change during last upgrade or have I messed with some settings?
Problem is that no matter what call sign I type in or if I click on a spot from cluster it’s populated with my own gridsquare.
How to fix this ?

Hugo / LA4WKA 


Re: Generic QSO Window

Gary Hinson
 

Cool!  Thanks Bill.

 

I’m updating the manual accordingly for the next release, advising us to making backups of our painstakingly-edited ADIFmodes.txt files.  

 

Likewise with any changes to customize the bands & modes table, country database, states/provinces, JCC & JCG and what have you.  And, of course, our logs.

 

Even if an autoupdate or Logger32 re-install or hard disk replacement or whatever obliterates the edited versions, it’s generally easier to restore from backups than to regenerate the changes.  

 

Backups are your friends.  Cherish them!  Look after them!  Take good care of them!  They are almost as valuable as the originals.  Love your backups!

 

73

Gary  ZL2iFB

 

PS  Call me paranoid but although I’d surely miss my emails, contacts, work files, digital photos and stuff if this PC was trashed or held to ransom, I’d be devastated to lose my log.  Such are this DXer’s priorities!  I’m backing up my whole log to an ADIF on a CD-RW disk, again, as I write this …

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Bill Engel
Sent: 25 July 2021 03:54
To: hamlogger@groups.io
Subject: Re: [hamlogger] Generic QSO Window

 

As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.  What I did back in March was to add Q65 to ADIFModes.txt.  I then inserted Q65 into the Edit Bands & Modes form.  A subsequent Logger32 Auto Update overwrote the ADIFModes.txt file and my Q65 was no longer there, but it was still in MyBandMode32.db file.  That is apparently what is stopping the awards window from displaying the log entries associated with an award.
I was able to confirm this by using a text editor to insert the Q65 line into MyBandMode32.txt and the log entries were not displayed.
Hope this helps.
Thanks Bob for a great program and Gary for your great documentation.
73,
Bill K5DHY


Re: Generic QSO Window

Gary Hinson
 

OK Ian.

 

I’m revisiting the Manual’s advice in this area and will see if I can make it clearer-er, provided I understand what’s required anyway!

 

73

Gary  ZL2iFB

 

PS  Too late for the Lotto Ian: the $15m went to some lucky bugger in Auckland last night.  Mind you, $7½m each would have been ‘sufficient’.

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of g4girhb0 via groups.io
Sent: 25 July 2021 02:17
To: hamlogger@groups.io
Subject: Re: [hamlogger] Generic QSO Window

 

Found it.

 

Thanks to all, Panos and John G7SSE, I remember adding SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!

 

Thanks all for your patience and help.

 

Oh, Garry, I don't mind choosing your numbers for next weeks draw :)

 

73

 

Ian G4GIR

 

----- Original Message -----

From: Bill Engel <k5dhy.groups@...>

Sent: 24/07/2021 14:50:49

Subject: Re: [hamlogger] Generic QSO Window


Ian - Yes, works for all awards including IOTA.

Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.  You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.

73,
Bill K5DHY


Re: ClubLog Exception for SV2RSG/A

YV5EN - Edwin
 

Thanks Gerald but I updated today July 24 ClubLog Exceptions (automatic update) but nothing changes.
Thanks Bob, I manually changed the Country for QSO with SV2RSG/A to show Mt. Athos

Best Regards and 73
--
Edwin - YV5EN (YV5HUJ 1979-2011)
        


Re: Generic QSO Window

Bob
 

KISS. I took the easy way out. ADIFModes.txt has been removed from auto-update files. SeventyThree(s).

On 07/24/2021 12:56 PM Bob <k4cy@...> wrote:
 
 
Yes, the auto-update includes an AFIFModes.txt file which will overwrite your modified one. You'll have to get in the habit of keeping a copy of your modified one and overwriting the one installed by the auto-update. That the problem with customizing your files (any of them). SeventyThree(s).
On 07/24/2021 11:54 AM Bill Engel <k5dhy.groups@...> wrote:
 
 
As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.  What I did back in March was to add Q65 to ADIFModes.txt.  I then inserted Q65 into the Edit Bands & Modes form.  A subsequent Logger32 Auto Update overwrote the ADIFModes.txt file and my Q65 was no longer there, but it was still in MyBandMode32.db file.  That is apparently what is stopping the awards window from displaying the log entries associated with an award.
I was able to confirm this by using a text editor to insert the Q65 line into MyBandMode32.txt and the log entries were not displayed.
Hope this helps.
Thanks Bob for a great program and Gary for your great documentation.
73,
Bill K5DHY


Re: Generic QSO Window

Bob
 

Yes, the auto-update includes an AFIFModes.txt file which will overwrite your modified one. You'll have to get in the habit of keeping a copy of your modified one and overwriting the one installed by the auto-update. That the problem with customizing your files (any of them). SeventyThree(s).

On 07/24/2021 11:54 AM Bill Engel <k5dhy.groups@...> wrote:
 
 
As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.  What I did back in March was to add Q65 to ADIFModes.txt.  I then inserted Q65 into the Edit Bands & Modes form.  A subsequent Logger32 Auto Update overwrote the ADIFModes.txt file and my Q65 was no longer there, but it was still in MyBandMode32.db file.  That is apparently what is stopping the awards window from displaying the log entries associated with an award.
I was able to confirm this by using a text editor to insert the Q65 line into MyBandMode32.txt and the log entries were not displayed.
Hope this helps.
Thanks Bob for a great program and Gary for your great documentation.
73,
Bill K5DHY


Re: Generic QSO Window

g4girhb0
 

My sentiments too Bill.
 
73
 
Ian G4GIR
 

----- Original Message -----
From: Bill Engel <k5dhy.groups@...>
Sent: 24/07/2021 16:54:18
Subject: Re: [hamlogger] Generic QSO Window

As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.  What I did back in March was to add Q65 to ADIFModes.txt.  I then inserted Q65 into the Edit Bands & Modes form.  A subsequent Logger32 Auto Update overwrote the ADIFModes.txt file and my Q65 was no longer there, but it was still in MyBandMode32.db file.  That is apparently what is stopping the awards window from displaying the log entries associated with an award.
I was able to confirm this by using a text editor to insert the Q65 line into MyBandMode32.txt and the log entries were not displayed.
Hope this helps.
Thanks Bob for a great program and Gary for your great documentation.
73,
Bill K5DHY


Re: Generic QSO Window

Bill Engel
 

As Bob has stated in order to insert Q65 into the MyBandMode32.db it has to be in the ADIFModes.txt file.  What I did back in March was to add Q65 to ADIFModes.txt.  I then inserted Q65 into the Edit Bands & Modes form.  A subsequent Logger32 Auto Update overwrote the ADIFModes.txt file and my Q65 was no longer there, but it was still in MyBandMode32.db file.  That is apparently what is stopping the awards window from displaying the log entries associated with an award.
I was able to confirm this by using a text editor to insert the Q65 line into MyBandMode32.txt and the log entries were not displayed.
Hope this helps.
Thanks Bob for a great program and Gary for your great documentation.
73,
Bill K5DHY


Re: Generic QSO Window

g4girhb0
 

Cheers
 

----- Original Message -----
From: Bob <k4cy@...>
Sent: 24/07/2021 16:13:35
Subject: Re: [hamlogger] Generic QSO Window

Yes, be my guest. 73.
On 07/24/2021 11:10 AM G4GIR via groups.io <i.frith@...> wrote:
Bob
Is it safe to Re-name  a good working ********MyBandMode32 Database file to be used with a different configuration?
i.e My Config Logger32 HF_DX Band/Mode file contains 11 entries for 60m, so I want all other configs to have those entries too so would copying and renaming i.e HF_DXMyBandMode32 to HF_JTDXMyBandMode32 be ok?
73
Ian G4GIR 
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window

If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
Found it.
Thanks to all, Panos and John G7SSE, I remember adding SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
Thanks all for your patience and help.
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
73
Ian G4GIR
----- Original Message -----
From: Bill Engel < k5dhy.groups@...>
Reply-To: < hamlogger@groups.io>
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window

Ian - Yes, works for all awards including IOTA.

Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.  You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.

73,
Bill K5DHY


Re: Generic QSO Window

Bob
 

Yes, be my guest. 73.

On 07/24/2021 11:10 AM G4GIR via groups.io <i.frith@...> wrote:
 
 
Bob
 
Is it safe to Re-name  a good working ********MyBandMode32 Database file to be used with a different configuration?
 
i.e My Config Logger32 HF_DX Band/Mode file contains 11 entries for 60m, so I want all other configs to have those entries too so would copying and renaming i.e HF_DXMyBandMode32 to HF_JTDXMyBandMode32 be ok?
 
73
 
Ian G4GIR 
 
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window

If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
 
 
Found it.
 
Thanks to all, Panos and John G7SSE, I remember adding SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
 
Thanks all for your patience and help.
 
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
 
73
 
Ian G4GIR
 
----- Original Message -----
From: Bill Engel < k5dhy.groups@...>
Reply-To: < hamlogger@groups.io>
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window

Ian - Yes, works for all awards including IOTA.

Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.  You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.

73,
Bill K5DHY


Re: Generic QSO Window

G4GIR
 

Bob
 
Is it safe to Re-name  a good working ********MyBandMode32 Database file to be used with a different configuration?
 
i.e My Config Logger32 HF_DX Band/Mode file contains 11 entries for 60m, so I want all other configs to have those entries too so would copying and renaming i.e HF_DXMyBandMode32 to HF_JTDXMyBandMode32 be ok?
 
73
 
Ian G4GIR 
 

----- Original Message -----
From: Bob <k4cy@...>
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window

If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
Found it.
Thanks to all, Panos and John G7SSE, I remember adding SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
Thanks all for your patience and help.
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
73
Ian G4GIR
----- Original Message -----
From: Bill Engel < k5dhy.groups@...>
Reply-To: < hamlogger@groups.io>
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window

Ian - Yes, works for all awards including IOTA.

Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.  You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.

73,
Bill K5DHY


Re: Icom SPLIT QSY macro

Tom Wylie
 

as everybody and heir granny moves 1khz up, why the need for a macro? Your split shpuld be determined by the width and direction of the pile up? No??


Tom
GM4FDM

On 24/07/2021 01:02, Vince Shirley wrote:
Now another question.....
When using the macro   $QSY #Split+01q#$
I get a response from Logger32 "The BandPlan has no entries that match a frequency of  18099.0 MHz" -  which is true if it really did mean 18099.0 MHz but it should be 18099.0 kHz
Its clearly saying MHz instead of kHz
Odd?
Vince
--
I thought growing old would take longer.
Just once, I want a username and password prompt to say: "Close enough."
At my funeral, take the bouquet from my coffin and throw it into the crowd to see who is next.
One minute you're young and fun. The next, you're turning down the car stereo to see better.
My people skills are just fine. Its my tolerance of idiots that needs work!


Re: Generic QSO Window

g4girhb0
 

Thanks Bob it wasn't in the text file must try harder
 
73
    Ian G4GIR

----- Original Message -----
From: Bob <k4cy@...>
Sent: 24/07/2021 15:26:50
Subject: Re: [hamlogger] Generic QSO Window

If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).
On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
Found it.
Thanks to all, Panos and John G7SSE, I remember adding SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
Thanks all for your patience and help.
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
73
Ian G4GIR
----- Original Message -----
From: Bill Engel < k5dhy.groups@...>
Reply-To: < hamlogger@groups.io>
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window

Ian - Yes, works for all awards including IOTA.

Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.  You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.

73,
Bill K5DHY


Re: Generic QSO Window

Bob
 

If you want to add mode/submode d'jour, it must be added to the ADIFModes.txt file, it must be added to the BandPlan, and it must be checked as a digital mode (if you want it included in the Digital stats). That requirement was in the v3.50 help file, and I assume it migrated to the v4.0 document. SeventyThree(s).

On 07/24/2021 10:17 AM g4girhb0 via groups.io <ian.frith@...> wrote:
 
 
Found it.
 
Thanks to all, Panos and John G7SSE, I remember adding SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
 
Thanks all for your patience and help.
 
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
 
73
 
Ian G4GIR
 
----- Original Message -----
From: Bill Engel < k5dhy.groups@...>
Reply-To: < hamlogger@groups.io>
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window

Ian - Yes, works for all awards including IOTA.

Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.  You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.

73,
Bill K5DHY


Re: Generic QSO Window

g4girhb0
 

Found it.
 
Thanks to all, Panos and John G7SSE, I remember adding SUBmode WSQCall (because I had worked it on LF), Deleted that from the band map and all is now fine. Checked the latest ADIF release and it doesn't appear anywhere. Should have listened to the warning sign!!
 
Thanks all for your patience and help.
 
Oh, Garry, I don't mind choosing your numbers for next weeks draw :)
 
73
 
Ian G4GIR
 

----- Original Message -----
From: Bill Engel <k5dhy.groups@...>
Sent: 24/07/2021 14:50:49
Subject: Re: [hamlogger] Generic QSO Window

Ian - Yes, works for all awards including IOTA.

Panos - I did add Q65 a few months ago, but since I reloaded everything it is no longer there.  You might be on to something!
I'll try adding Q65 to Bands and Modes when I get some time.

73,
Bill K5DHY


Re: Generic QSO Window

Bob
 

... and the BandPlan is a text file called MyBandPlan.db 73.

On 07/24/2021 9:56 AM G4GIR via groups.io <i.frith@...> wrote:
 
 
Hi Bob
 
I have just carried out a rebuild of the log, re-calculation and still no QSO'S shown in the Generic QSO window.
Down loaded the full version. and installed it.
Run the re-install and still no QSO's showing.
Renamed the Logger32 ini file Logger32old.
 
Run L32, still no sign of any QSO's.
 
Created a new logbook and Imported a small ADIF file 90 QSO's, run the DXCC AWARD selected MIXED_MODE and still no QSO's showing in the Generic window.
 
Looks like I need to completely uninstall using windows uninstaller?
 
If I keep the Log Backup and the User files backup then I assume I can get back to all the other configurations I have made. One question though, ia all the colouring text and back ground shading etc backed up in the ini files?
 
73
 
Ian G4GIR
 
 
 
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window

... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
 
 
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
 
73 Ian
 
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window

You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
 
 
Same issue here.  Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.

Bill K5DHY


Re: Generic QSO Window

Bob
 

All your colors/fonts/etc. is inthe INI files. As far as logbooks are concerned, KISS and make an ADIF backup. 73.

On 07/24/2021 9:56 AM G4GIR via groups.io <i.frith@...> wrote:
 
 
Hi Bob
 
I have just carried out a rebuild of the log, re-calculation and still no QSO'S shown in the Generic QSO window.
Down loaded the full version. and installed it.
Run the re-install and still no QSO's showing.
Renamed the Logger32 ini file Logger32old.
 
Run L32, still no sign of any QSO's.
 
Created a new logbook and Imported a small ADIF file 90 QSO's, run the DXCC AWARD selected MIXED_MODE and still no QSO's showing in the Generic window.
 
Looks like I need to completely uninstall using windows uninstaller?
 
If I keep the Log Backup and the User files backup then I assume I can get back to all the other configurations I have made. One question though, ia all the colouring text and back ground shading etc backed up in the ini files?
 
73
 
Ian G4GIR
 
 
 
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window

... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
 
 
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
 
73 Ian
 
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window

You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
 
 
Same issue here.  Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.

Bill K5DHY


Re: Generic QSO Window

G4GIR
 

Hi Bob
 
I have just carried out a rebuild of the log, re-calculation and still no QSO'S shown in the Generic QSO window.
Down loaded the full version. and installed it.
Run the re-install and still no QSO's showing.
Renamed the Logger32 ini file Logger32old.
 
Run L32, still no sign of any QSO's.
 
Created a new logbook and Imported a small ADIF file 90 QSO's, run the DXCC AWARD selected MIXED_MODE and still no QSO's showing in the Generic window.
 
Looks like I need to completely uninstall using windows uninstaller?
 
If I keep the Log Backup and the User files backup then I assume I can get back to all the other configurations I have made. One question though, ia all the colouring text and back ground shading etc backed up in the ini files?
 
73
 
Ian G4GIR
 
 
 

----- Original Message -----
From: Bob <k4cy@...>
Sent: 23/07/2021 19:25:33
Subject: Re: [hamlogger] Generic QSO Window

... andif that doesn't work, go to database maintenance and rebuild your logbook. It's all time well spent, the databases will be ordered correctly and compacted. SeventyThree(s).
On 07/23/2021 2:06 PM G4GIR via groups.io <i.frith@...> wrote:
Started the re-calc will let you know in about an hour or so.
However the totals in the DXCC Awards window are spot on!
73 Ian
----- Original Message -----
From: Bob < k4cy@...>
Reply-To: < hamlogger@groups.io>
Sent: 23/07/2021 17:44:29
Subject: Re: [hamlogger] Generic QSO Window

You might try recalc of your stats. 73.
On 07/23/2021 10:03 AM Bill Engel <k5dhy.groups@...> wrote:
Same issue here.  Any award I click on comes up with an empty window with the proper heading. Selections: All Operators, QSL & LoTW QSL, Complete Logbook.

Bill K5DHY

1561 - 1580 of 86710