Date   

Re: Generic QSO Window

Bob
 

On the configuration that doesn't work, is the generic QSOs window caption correct? 73.

On 07/22/2021 9:57 AM G4GIR via groups.io <i.frith@...> wrote:
 
 
I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.

I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except  one  configuration, where no QSO's appear.

I am guessing this could be a problem in the configurations .ini file?

Any Ideas please.

73

Ian G4GIR


Generic QSO Window

G4GIR
 

I have a problem with the Generic QSO Window not showing any QSO's when left clicking a confirmation box in the DXCC Awards window.

I have 6 different Configuration start ups for different rigs JTDX etc. All the configurations WORK OK when clicking a confirmation box in the DXCC Awards window (i.e the QSO'S appear) except  one  configuration, where no QSO's appear.

I am guessing this could be a problem in the configurations .ini file?

Any Ideas please.

73

Ian G4GIR


Generic QSO Window Problem

G4GIR
 

I have a problem with the 


Re: Update: Cherry picking

martinwcf
 

Hi Jay,

I na using JTDX for FT4/FT8 and cherry picking from L32 working fine with station calling CQ, station sending 73 (RR73), new grids, new ones etc.

73 Martin OK1WCF


______________________________________________________________
Od: "F4CVO" <f4cvo@free.fr>
Komu: hamlogger@groups.io
Datum: 21.07.2021 15:28
Předmět: Re: [hamlogger] Update: Cherry picking
The cherry-picking work again but only with the stations calling CQ, he didn’t work for the grid square… 73 qro Jay F4CVOEnvoyé de mon iPhoneLe 20 juil. 2021 à 22:48, Bob <k4cy@comcast.net> a écrit :






Can you describe 'doesn't work anymore' please. SeventyThree(s).



On 07/19/2021 10:55 PM F4CVO <f4cvo@free.fr> wrote:


 


 
Hi everyone,

Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore. 


73 Jay F4CVO



 




Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@gmail.com> a écrit :






Just discovered that,  in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.  Guess I inadvertently toggled it off somehow.  Nothing to do with Logge32 update.  Might there be a similar setting in WSJT-X?  At least for me, puzzle solved.


Re: Update: Cherry picking

Bob
 

Friday last week I released v4.0.269. I also put this message on the reflector:
 
For those who use the FT4/8 cherry-picker, there is a new option added. On the UDP BandMap click CONFIG | CHERRY_PICKING OPTIONS. There is a new option to enable sympathy calls to stations sending 73/RR73. With the option UNchecked, Logger32 will only call a station sending 73 or RR73 is it is a new band/mode/gridsquare. With the option checked, Logger32 will call anyone sending 73 or RR73 if the station has not been contacted this band/mode before. I have not tested this option with WSJT, but I suspect it may work on FT4 and almost certainly not work on FT8.
 
Also, on the cherry-picking event viewer window, under the CONFIG menu there is a new color selection option to change the text color of the 'QSO ended with 73/RR73' message.
 
Finally, there is a minor change to the TUNE menu of the CW Machine. It now turns itself off after 30 seconds.
 
Please read the red text. I assume MSHV works the same way as WSJT.
SeventyThree(s).

On 07/21/2021 9:27 AM F4CVO <f4cvo@...> wrote:
 
 
The cherry-picking work again but only with the stations calling CQ, he didn’t work for the grid square… 
73 qro 
Jay F4CVO
Envoyé de mon iPhone

Le 20 juil. 2021 à 22:48, Bob <k4cy@...> a écrit :

Can you describe 'doesn't work anymore' please. SeventyThree(s).
On 07/19/2021 10:55 PM F4CVO <f4cvo@...> wrote:
 
 
Hi everyone,
Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore. 
73 Jay F4CVO

 

Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@...> a écrit :

Just discovered that,  in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.  Guess I inadvertently toggled it off somehow.  Nothing to do with Logge32 update.  Might there be a similar setting in WSJT-X?  At least for me, puzzle solved.


Re: Update: Cherry picking

ja1nlx
 

Jay

Use JTDX. It supports everything.

73 de aki
JA1NLX

------ Original message ------
From: "F4CVO" <f4cvo@...>
Date: 2021/07/21 22:27:59
Subject Re: [hamlogger] Update: Cherry picking

The cherry-picking work again but only with the stations calling CQ, he didn’t work for the grid square… 
73 qro 
Jay F4CVO
Envoyé de mon iPhone

Le 20 juil. 2021 à 22:48, Bob <k4cy@...> a écrit :


Can you describe 'doesn't work anymore' please. SeventyThree(s).
On 07/19/2021 10:55 PM F4CVO <f4cvo@...> wrote:
 
 
Hi everyone,
Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore. 
73 Jay F4CVO

 

Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@...> a écrit :

Just discovered that,  in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.  Guess I inadvertently toggled it off somehow.  Nothing to do with Logge32 update.  Might there be a similar setting in WSJT-X?  At least for me, puzzle solved.


Re: Update: Cherry picking

F4CVO
 

The cherry-picking work again but only with the stations calling CQ, he didn’t work for the grid square… 
73 qro 
Jay F4CVO
Envoyé de mon iPhone

Le 20 juil. 2021 à 22:48, Bob <k4cy@...> a écrit :


Can you describe 'doesn't work anymore' please. SeventyThree(s).
On 07/19/2021 10:55 PM F4CVO <f4cvo@...> wrote:
 
 
Hi everyone,
Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore. 
73 Jay F4CVO

 

Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@...> a écrit :

Just discovered that,  in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.  Guess I inadvertently toggled it off somehow.  Nothing to do with Logge32 update.  Might there be a similar setting in WSJT-X?  At least for me, puzzle solved.


Re: Update: Cherry picking

Bob
 

Can you describe 'doesn't work anymore' please. SeventyThree(s).

On 07/19/2021 10:55 PM F4CVO <f4cvo@...> wrote:
 
 
Hi everyone,
Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore. 
73 Jay F4CVO

 

Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@...> a écrit :

Just discovered that,  in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.  Guess I inadvertently toggled it off somehow.  Nothing to do with Logge32 update.  Might there be a similar setting in WSJT-X?  At least for me, puzzle solved.


Re: Update: Cherry picking

ja1nlx
 

Jay

Cherry picking worked with MSHV before Logger32 update.
Is this correct ?  If so something changed in UDP BandMap settings.
Check all options first.

73 de aki
JA1NLX

------ Original message ------
From: "F4CVO" <f4cvo@...>
Date: 2021/07/20 11:55:12
Subject Re: [hamlogger] Update: Cherry picking

Hi everyone,
Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore. 
73 Jay F4CVO



Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@...> a écrit :

Just discovered that,  in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.  Guess I inadvertently toggled it off somehow.  Nothing to do with Logge32 update.  Might there be a similar setting in WSJT-X?  At least for me, puzzle solved.


Re: Update: Cherry picking

F4CVO
 

Hi everyone,
Just before the update, I discovered the cherry-picking. It was worked on MSHV software, and without make something, cherry-picking didn’t work anymore. 
73 Jay F4CVO



Le 20 juil. 2021 à 03:26, Howard McVay <kd7ma.ae@...> a écrit :

Just discovered that,  in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.  Guess I inadvertently toggled it off somehow.  Nothing to do with Logge32 update.  Might there be a similar setting in WSJT-X?  At least for me, puzzle solved.


Update: Cherry picking

Howard McVay
 

Just discovered that,  in JTDX, the "AutoTx" button needs to be enabled for Logger32 Cherry Picking to work.  Guess I inadvertently toggled it off somehow.  Nothing to do with Logge32 update.  Might there be a similar setting in WSJT-X?  At least for me, puzzle solved.


Re: Cherry picking

n5kd
 

And….. on the right hand side of the front screen, check the AutoTX button is green.

 

Sent from Mail for Windows 10

 

From: Bob
Sent: Monday, July 19, 2021 16:51
To: hamlogger@groups.io
Subject: Re: [hamlogger] Cherry picking

 

On JTDX click FILE | SETTINGS. Click the REPORTING tab. Make sure ACCEPT UDP REQUESTS is checked. Click OK.

 

On JTDX Click MISC | ACCEPT UDP REPLY MESSAGES. Make sure ANY MESSAGE is checked.

 

SeventyThree(s)

On 07/19/2021 12:31 PM Howard McVay <kd7ma.ae@...> wrote:

 

 

I too experience this behavior using JTDX v156.   This began shortly after I updated Logger32 to V4.0.469.  Nothing else has changed (to my knowledge) in a while.
In the Cherry Picking Event viewer,  I see the following:   Note the message "JTDX did not switch to transmit".  I've verified JTDX works normally with manual activation of Txd.



Howard KD7MA

 


Re: Cherry picking

Bob
 

On JTDX click FILE | SETTINGS. Click the REPORTING tab. Make sure ACCEPT UDP REQUESTS is checked. Click OK.
 
On JTDX Click MISC | ACCEPT UDP REPLY MESSAGES. Make sure ANY MESSAGE is checked.
 
SeventyThree(s)

On 07/19/2021 12:31 PM Howard McVay <kd7ma.ae@...> wrote:
 
 
I too experience this behavior using JTDX v156.   This began shortly after I updated Logger32 to V4.0.469.  Nothing else has changed (to my knowledge) in a while.
In the Cherry Picking Event viewer,  I see the following:   Note the message "JTDX did not switch to transmit".  I've verified JTDX works normally with manual activation of Txd.



Howard KD7MA


Re: Cherry picking

Howard McVay
 

I too experience this behavior using JTDX v156.   This began shortly after I updated Logger32 to V4.0.469.  Nothing else has changed (to my knowledge) in a while.
In the Cherry Picking Event viewer,  I see the following:   Note the message "JTDX did not switch to transmit".  I've verified JTDX works normally with manual activation of Txd.



Howard KD7MA


Re: Jim (W5IFP)

Rick Williams - VE7TK
 

Thanks for the update Bob. I hope Jim gets better soon. We all miss him, his calm demeanor and his expertise!

Get well soon Jim!

73, Rick
VE7TK


Re: Jim (W5IFP)

BD4EPV
 

And hope Jim for all the best!  I just want to tell that there are friends on another side of the earth caring about him.

73 de Joseph, BD4EPV

On Monday, July 19, 2021, 07:43:18 AM GMT+8, Bob <k4cy@...> wrote:


Randall, thanks so much for your message. We, the Logger32 community and Beta testers, have been very concerned for Jim's well being for a few weeks. Please tell Jim we are all rooting for him, and he is in our thoughts and prayers. And to Mrs. Hargrave (Mary, I think) we wish her well, strength, and courage as time progresses. I have sent a copy of this message to the almost 4000 active Logger32 users who have benefited so much from Jim's 20+ years of tireless support of this project. 
 
The kd5wkk@... mailbox will overflow in the next 24 hours. Good luck, and may your God bless you. Your Father in law is without a doubt 'one of the good guys'.  With my love and affection, SeventyThree(s), Bob.
 
On 07/18/2021 6:57 PM Randall Booth <kd5wkk@...> wrote:
 
 

Bob,

 

I’m Randall Booth (KD5WKK) Jim’s son-in-law.  Jim wanted me to let you know he is currently in a physical therapy facility and will not be able to participate in the Logger32 testing for the next week or so.

 

Jim is doing fine but needed some Occupational and Physical therapy related to his Parkinson’s diagnosis.

 

Regards,

 

Randall Booth

KD5WKK

 

 


Re: Jim (W5IFP)

Larry Fravel
 

Thanks you for sharing and your eloquence Bob.  My prayers for Jim and his family. 

Larry K8YYY

Shinnston WV EM99uk

--
I got expelled from school on Pajama Day. Not my fault - I sleep naked.


Re: Jim (W5IFP)

ja1nlx
 

I really hope Jim is back again.

73 de aki
JA1NLX

------ Original message ------
From: "Bob" <k4cy@...>
To: "Randall Booth" <kd5wkk@...>
Date: 2021/07/19 8:43:13
Subject Re: [hamlogger] Jim (W5IFP)

Randall, thanks so much for your message. We, the Logger32 community and Beta testers, have been very concerned for Jim's well being for a few weeks. Please tell Jim we are all rooting for him, and he is in our thoughts and prayers. And to Mrs. Hargrave (Mary, I think) we wish her well, strength, and courage as time progresses. I have sent a copy of this message to the almost 4000 active Logger32 users who have benefited so much from Jim's 20+ years of tireless support of this project. 
 
The kd5wkk@... mailbox will overflow in the next 24 hours. Good luck, and may your God bless you. Your Father in law is without a doubt 'one of the good guys'.  With my love and affection, SeventyThree(s), Bob.
 
On 07/18/2021 6:57 PM Randall Booth <kd5wkk@...> wrote:
 
 

Bob,

 

I’m Randall Booth (KD5WKK) Jim’s son-in-law.  Jim wanted me to let you know he is currently in a physical therapy facility and will not be able to participate in the Logger32 testing for the next week or so.

 

Jim is doing fine but needed some Occupational and Physical therapy related to his Parkinson’s diagnosis.

 

Regards,

 

Randall Booth

KD5WKK

 

 


Re: Jim (W5IFP)

Kenneth Hansen <khansen@...>
 

Very nice said Bob
Get well Jim
de KB2SSE

On Sun, Jul 18, 2021 at 7:43 PM Bob <k4cy@...> wrote:
Randall, thanks so much for your message. We, the Logger32 community and Beta testers, have been very concerned for Jim's well being for a few weeks. Please tell Jim we are all rooting for him, and he is in our thoughts and prayers. And to Mrs. Hargrave (Mary, I think) we wish her well, strength, and courage as time progresses. I have sent a copy of this message to the almost 4000 active Logger32 users who have benefited so much from Jim's 20+ years of tireless support of this project. 
 
The kd5wkk@... mailbox will overflow in the next 24 hours. Good luck, and may your God bless you. Your Father in law is without a doubt 'one of the good guys'.  With my love and affection, SeventyThree(s), Bob.
 
On 07/18/2021 6:57 PM Randall Booth <kd5wkk@...> wrote:
 
 

Bob,

 

I’m Randall Booth (KD5WKK) Jim’s son-in-law.  Jim wanted me to let you know he is currently in a physical therapy facility and will not be able to participate in the Logger32 testing for the next week or so.

 

Jim is doing fine but needed some Occupational and Physical therapy related to his Parkinson’s diagnosis.

 

Regards,

 

Randall Booth

KD5WKK

 

 

--
Kenneth Hansen
Owner
ScanAm Technical Services, LLC


Re: Jim (W5IFP)

Bob
 

Randall, thanks so much for your message. We, the Logger32 community and Beta testers, have been very concerned for Jim's well being for a few weeks. Please tell Jim we are all rooting for him, and he is in our thoughts and prayers. And to Mrs. Hargrave (Mary, I think) we wish her well, strength, and courage as time progresses. I have sent a copy of this message to the almost 4000 active Logger32 users who have benefited so much from Jim's 20+ years of tireless support of this project. 
 
The kd5wkk@... mailbox will overflow in the next 24 hours. Good luck, and may your God bless you. Your Father in law is without a doubt 'one of the good guys'.  With my love and affection, SeventyThree(s), Bob.
 

On 07/18/2021 6:57 PM Randall Booth <kd5wkk@...> wrote:
 
 

Bob,

 

I’m Randall Booth (KD5WKK) Jim’s son-in-law.  Jim wanted me to let you know he is currently in a physical therapy facility and will not be able to participate in the Logger32 testing for the next week or so.

 

Jim is doing fine but needed some Occupational and Physical therapy related to his Parkinson’s diagnosis.

 

Regards,

 

Randall Booth

KD5WKK

 

 

1521 - 1540 of 86600