Date   

DXlabs

Rich <marzo7088@...>
 

Can anyone tell me where the link is to download DXlabs?I tried clicking on the download tab and there is only instructions.


Re: Band Change Aerial Switch

Julian GW4JBQ
 

Hi Jim,
Many thanks for the reply It's not something that I've noticed before but I have the clubs 7300 for safe keeping at the moment and having a bit of a change around but now that I know that it's not a fault, I can live with that. Thanks also for the offer of help, I really appreciate that but I should be ok on the switching front.
Take care Jim and thanks again

    73 de Julian  GW4JBQ


Re: Happy Birthday Bob

Ian Morrison
 

NOT ANOTHER ONE!!!

To many of those have serious consequences, so beware.

Congrats. on having   …ahhh…  maybe 39 of them? <grin>

Enjoy  the Grouse and have one for me.

 

73, Ian

( more that 39 X 2)

 

Sent from Mail for Windows 10

 

Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#82476) | Reply To Group | Reply To Sender | Mute This Topic | New Topic
Your Subscription | Contact Group Owner | Unsubscribe [imorrison@...]

_._,_._,_

 


Re: Band Change Aerial Switch

Jim Hargrave
 

Hi Julian,

I mis understood your question. What you see is normal for the 920.

The FT-920 does not have CAT control of the built in antenna switch. As such the antenna switch cannot be controlled by external commands.

 

Logger32 has 2 (Serial USB and parallel  LPT) methods for automatic antenna   switching. Suggest you consider installing one to control your antenna switching.

Instructions are included in the Logger32 version 350 manual.  I can offer suggestions on those, should you elect to build one.

 

Jim – w5ifp-

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Julian GW4JBQ
Sent: Tuesday, February 2, 2021 10:34 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Band Change Aerial Switch

 

 

 


From: Julian Cleak <j.cleak@...>
Sent: Tuesday, 2 February 2021, 16:33
To: hamlogger@groups.io
Subject: Re: [hamlogger] Band Change Aerial Switch



Hi Jim,

   Well that's what it's supposed to do and changing bands on the radio does just that but when you change bands on JTDX or JTDX control panel it doesn't. In fact when it changes band and remains on the same aerial you then have to change it manually as the radio remembers the wrong setting.

If it doesn't happen to anyone else that has a 920 Then I will look at connecting up another pc and seeing if it needs cleaning down and reinstalling.

   Julian GW4JBQ


From: hamlogger@groups.io <hamlogger@groups.io> on behalf of Jim Hargrave <w5ifp@...>
Sent: Tuesday, February 2, 2021 2:01:02 PM
To: hamlogger@groups.io <hamlogger@groups.io>
Subject: Re: [hamlogger] Band Change Aerial Switch

 

Julian,

The FT-920 remembers the Antenna last used on band-x and will switch built-in A/B antennas to the last used band setting.

 

My FT 920 is setup to switch to antenna B when 6M is selected and antenna A for the TH6DXX beam on 20/15 and 10M

 

This is easy to set up…. manually select the antenna for each band and it will remember.

 

Jim – w5ifp-

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Julian GW4JBQ
Sent: Tuesday, February 2, 2021 4:42 AM
To: hamlogger@groups.io
Subject: [hamlogger] Band Change Aerial Switch

 

I know this will be a JTDX Group issue but I am not a member and it's probably been addressed before so apologies.
I have an FT920 with beam on Ant-A and wire on Ant-B, when switching bands on JTDX control panel (and stand alone jtdx) the ant switch on the rig remains on Ant-A so has to be switched manually. I can't find any reference to Aerial switching in any of the documentation so I wonder if this has come up before (I guess it must have) ? 

    Many thanks de Julian  GW4JBQ 

__,_._,_


Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#82469) | Reply To Group | Reply To Sender | Mute This Topic | New Topic
Your Subscription | Contact Group Owner | Unsubscribe [julian@...]


Re: Happy Birthday Bob

Richard M. Gillingham
 


Happy birthday Bob.

Thanks for all you do for us ingrates.  

73
Gil, W1RG


Re: Happy Birthday Bob

John Munton - G7SSE
 

Happy Birthday from here too Bob
73, John - G7SSE


Re: Band Change Aerial Switch

Julian GW4JBQ
 




From: Julian Cleak <j.cleak@...>
Sent: Tuesday, 2 February 2021, 16:33
To: hamlogger@groups.io
Subject: Re: [hamlogger] Band Change Aerial Switch

Hi Jim,

   Well that's what it's supposed to do and changing bands on the radio does just that but when you change bands on JTDX or JTDX control panel it doesn't. In fact when it changes band and remains on the same aerial you then have to change it manually as the radio remembers the wrong setting.
If it doesn't happen to anyone else that has a 920 Then I will look at connecting up another pc and seeing if it needs cleaning down and reinstalling.

   Julian GW4JBQ

From: hamlogger@groups.io <hamlogger@groups.io> on behalf of Jim Hargrave <w5ifp@...>
Sent: Tuesday, February 2, 2021 2:01:02 PM
To: hamlogger@groups.io <hamlogger@groups.io>
Subject: Re: [hamlogger] Band Change Aerial Switch
 

Julian,

The FT-920 remembers the Antenna last used on band-x and will switch built-in A/B antennas to the last used band setting.

 

My FT 920 is setup to switch to antenna B when 6M is selected and antenna A for the TH6DXX beam on 20/15 and 10M

 

This is easy to set up…. manually select the antenna for each band and it will remember.

 

Jim – w5ifp-

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Julian GW4JBQ
Sent: Tuesday, February 2, 2021 4:42 AM
To: hamlogger@groups.io
Subject: [hamlogger] Band Change Aerial Switch

 

I know this will be a JTDX Group issue but I am not a member and it's probably been addressed before so apologies.
I have an FT920 with beam on Ant-A and wire on Ant-B, when switching bands on JTDX control panel (and stand alone jtdx) the ant switch on the rig remains on Ant-A so has to be switched manually. I can't find any reference to Aerial switching in any of the documentation so I wonder if this has come up before (I guess it must have) ? 

    Many thanks de Julian  GW4JBQ 

__,_._,_

Groups.io Links:

You receive all messages sent to this group.

View/Reply Online (#82469) | Reply To Group | Reply To Sender | Mute This Topic | New Topic
Your Subscription | Contact Group Owner | Unsubscribe [julian@...]

_._,_._,_


Re: Happy Birthday Bob

k4cvl
 

Happy BirthHogsday Bob.  And remember (since you have developed and maintain such a great product) what Punxsutawney Phil once said to me while vacationing here in Florida sometime back. “No good deed goes unpunished”.     – Mike, K4CVL

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Jim Altman
Sent: Tuesday, February 02, 2021 11:24 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Happy Birthday Bob

 

Happy Birthday Bob and thanks for all you do.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Larry Fravel
Sent: Tuesday, February 2, 2021 11:11 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Happy Birthday Bob

 

Happy Birthday Bob! 

Larry K8YYY

--
"There are far better things ahead than any we leave behind." C. S. Lewis


Re: Happy Birthday Bob

Jim Altman
 

Happy Birthday Bob and thanks for all you do.

 

 

 

Jim Altman

jaltman636@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Larry Fravel
Sent: Tuesday, February 2, 2021 11:11 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Happy Birthday Bob

 

Happy Birthday Bob! 

Larry K8YYY

--
"There are far better things ahead than any we leave behind." C. S. Lewis


Re: ADIF Log Import

Jim K2QB
 

Thanks for the info...Jim K2QB


Re: Happy Birthday Bob

Larry Fravel
 

Happy Birthday Bob! 

Larry K8YYY

--
"There are far better things ahead than any we leave behind." C. S. Lewis


Re: Error every now and again

Paul Scarratt
 

Hi Bob just an update seems to be fine I have had no issues as yet under version .420

Paul G0WRE 

dah-di-dah


Re: Happy Birthday Bob

NICK K. PLUMIDAKIS
 

Dear Bob

 


Re: a LOG CALL IN BLUE

Bob
 

Logbook Page highlight color are user configured by clicking on the SETUP menu then Highlight. For additional settings, right click on the Logbook page, then click SETUP. The second and third menu there is the highlight color of a row when you click on it. Other settings there are highlight of the row you have clicked on or selected for editing, also highlight colors for LoTW/OQRS users. 73.

On 02/01/2021 8:09 PM w5jmw <w5jmw@towerfarm.net> wrote:


OK,using version 4.My log is back yellow and fonts are red when qsl
confirmed.Few nights ago and today.I logged a call.It is in blue.I
manually confirmed it,tried to edit it(color) even tried to delete.When
I stop on the line of the log where the call appears the entire row goes
blank.What does the blue call mean and where is it being told to go
blue...? I have checked the fonts and colors..I do not see a blue
anywhere.Clues? anyone



New release of 2Tone

Bob
 

For those who use the G4YYD RTTY software 2Tone in conjunction with Logger32, David has released an updated version. It is at www.Logger32.net on the Utilities page. Enjoy. 73.


Re: Happy Birthday Bob

Bob
 

Thanks Rob. If nothing else, it was a good excuse to buy a big bottle of Grouse :)

On 02/02/2021 6:46 AM Rob <rob.harrison@...> wrote:
 
 
73


Re: Happy Birthday Bob

David Mitchell
 

Happy Birthday Bob and thanks for all the hard work and time you spend on this great piece of software.  May you have many more years of health and happiness.

-- Dave WB2PJH

Virus-free. www.avast.com


Re: Band Change Aerial Switch

Jim Hargrave
 

Julian,

The FT-920 remembers the Antenna last used on band-x and will switch built-in A/B antennas to the last used band setting.

 

My FT 920 is setup to switch to antenna B when 6M is selected and antenna A for the TH6DXX beam on 20/15 and 10M

 

This is easy to set up…. manually select the antenna for each band and it will remember.

 

Jim – w5ifp-

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Julian GW4JBQ
Sent: Tuesday, February 2, 2021 4:42 AM
To: hamlogger@groups.io
Subject: [hamlogger] Band Change Aerial Switch

 

I know this will be a JTDX Group issue but I am not a member and it's probably been addressed before so apologies.
I have an FT920 with beam on Ant-A and wire on Ant-B, when switching bands on JTDX control panel (and stand alone jtdx) the ant switch on the rig remains on Ant-A so has to be switched manually. I can't find any reference to Aerial switching in any of the documentation so I wonder if this has come up before (I guess it must have) ? 

    Many thanks de Julian  GW4JBQ 


Re: Trying to load logger

n5kd
 

Did you upgrade from V3 to V4 while doing this?
The new version uses a different database engine and is not backwards compatable.
You need to expert your V3 log as an ADIF file, then import this into V4.

If your using the same version, then I don’t have a clue.

 

73’ Pete, N5KD.

 

From: w5jmw
Sent: Tuesday, February 2, 2021 7:44 AM
To: hamlogger@groups.io
Subject: [hamlogger] Trying to load logger

 

Hi All.I am trying to load a new logger32 program in a machine that had logger32.I deleted the app,deleted the file in directory I have reloaded the program 2 times.I pulled the logbook from another machine.When I try to pull up the logger32.I get this,,,failed to open/read the adif countries with primary subdivisions.txt file.....Then I close this out and try to bring up the log and I get this...Run=time error 5 invalid procedure call or argument...Ok what am I missing or doing wrong ??

 


Virus-free. www.avg.com


Re: Logger32 Website Updates

Rick EA4M
 

Thanks Prasad!!!!!


El mar., 2 feb. 2021 12:32, ja1nlx <ayoshida0205@...> escribió:

Prasad

Good job !

73

On 2021/02/02 20:04, Prasad wrote:

Folks,

The following have been updated on the website:

1. Latest v4 English PDF Help File  by Gary ZL2IFB on the Support page

2. Link to a new Spanish Language support and help page provided by Rick EA4M  on the Support page

3. New version of 2Tone v21.01c on the Utilities Page

4. Google Translate is now available on the top left side of the website - you can now read the website even in Afrikaans or Zulu if you wish. 

I am not responsible in any way for the meanings of the Google translation for any language ;-)


73 de Prasad VU2PTT, W2PTT (ex-AF6DV)
Webmaster - Logger32 www.logger32.net

--
73 de aki
JA1NLX

3701 - 3720 of 86157