Date   

Re: Cannot switch mode in JTDX Control panel

Joseph LaFerla
 

Thanks Aki, I will try this tomorrow and report back.

Joe VA3JLF


Re: JTDX Control Panel

Ian Morrison
 

Thanks Aki. Such a simple solution.

 

73,

Ian

 

 

Sent from Mail for Windows 10

 

From: ja1nlx
Sent: Saturday, January 30, 2021 5:29 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] JTDX Control Panel

 

Ian

What is JTDX version?  You should use the latest public released version.

73

On 2021/01/31 7:16, Ian Morrison wrote:

I cannot change mode using the JTDX control panel. The colour follows the mode set using the main JTDX screen. Everything else works on the panel.

Latest version of V4

Thanks, Ian

VE3EP

 

 

Sent from Mail for Windows 10

 

--
73 de aki
JA1NLX

 


Re: BAD.adi

Ron Smith <n7rd@...>
 

Tnx so much Bob!


73, Ron N7RD


On Sat, Jan 30, 2021, 1:17 PM Bob <k4cy@...> wrote:
You have two choices: a) fix the CNTY field for each QSO rejected, or forget the CNTY field and import the QSO anyway. Take your pick.
 
If you decide you really don't care about the CNTY, then edit the ADIF file (using Notepad or something), and do a global replace of <CNTY: to <xCNTY:  Then change the name of the file from BAD.ADI to GOOD.ADI and import it. There is no ADIF defined xCNTY field, so it is ignored.
 
And, if your curious, you might want to analize a couple of the rejected QSOs to determine exactly what is wrong with them. If you don't know how, just copy and paste a couple of QSOs here, and we can take a peek.
 
SeventyThree(s).
On 01/30/2021 3:07 PM Ron Smith <n7rd@...> wrote:
 
 
New to group, just uploaded adif file to Logger32.  Ended up with 1713 Q's in BAD.adi.  Opened with Note Book and all are marked CNTY.  All the listings have cnty then a number, how do I repair this huge file and get these contacts into the program?  
 
Thanks in advance.
 
 

 
--
Best Regards,
 
Ron N7RD


Re: Cannot switch mode in JTDX Control panel

ja1nlx
 

Joe

What is JTDX version?  You should use the latest public released version.

73

On 2021/01/31 7:40, Joseph LaFerla wrote:

I am using the UDP Bandmap, L32 and JTDX (on top).  Version 4.0.238 of L32.  I have the DTDX Control Panel open.  I have opened the JTDX Control Panel from the Start/Stop button on the bandmap.  Using the Control panel I can switch frequencies no problem most times but the mode buttons do not work.  I can only change mode from the JTDX program itself.  Also, sometimes I have to click on a frequency repeatedly for it to be recognized and sometimes it does not respond at all or with a significant delay..  Pressing the halt button most times does not stop JTDX. If this has been discussed and resolved before please point it out.  I cannot understand what I am doing wrong, but if I am please someone point it out.  

Thanks.

Joe VA3JLF

--
73 de aki
JA1NLX


Cannot switch mode in JTDX Control panel

Joseph LaFerla
 

I am using the UDP Bandmap, L32 and JTDX (on top).  Version 4.0.238 of L32.  I have the DTDX Control Panel open.  I have opened the JTDX Control Panel from the Start/Stop button on the bandmap.  Using the Control panel I can switch frequencies no problem most times but the mode buttons do not work.  I can only change mode from the JTDX program itself.  Also, sometimes I have to click on a frequency repeatedly for it to be recognized and sometimes it does not respond at all or with a significant delay..  Pressing the halt button most times does not stop JTDX. If this has been discussed and resolved before please point it out.  I cannot understand what I am doing wrong, but if I am please someone point it out.  

Thanks.

Joe VA3JLF


Re: Question JTDX Control Panel

Philip (G4OBK) Catterall
 

Cheap screens – ref Gary’s ZL2IFB Comment

 

About 6 months ago I bought an IIyama 22” widescreen for £23 delivered, from an eBay IT reseller in Bradford. No stand included,  but I had a spare that fitted.  It’s superb on my second (recycled SSD PC) and doesn’t take up much desk space in my small shack. Maybe I was fortunate but there are bargains to be had if you take a chance Tom.

 

Loving using the JTDX control panel, nicely integrated into Logger 32 with several features which it includes over and above the main alternative. Appreciated Bob K4CY suggesting I try it, it was worth the half day or so spent setting up and learning what was happening in its use! Good work done on writing the manual in relation to JTDX – easy to follow. I think that was down to Gary and probably others.

 

73 Phil

 

 


Re: JTDX Control Panel

ja1nlx
 

Ian

What is JTDX version?  You should use the latest public released version.

73

On 2021/01/31 7:16, Ian Morrison wrote:

I cannot change mode using the JTDX control panel. The colour follows the mode set using the main JTDX screen. Everything else works on the panel.

Latest version of V4

Thanks, Ian

VE3EP

 

 

Sent from Mail for Windows 10

 

--
73 de aki
JA1NLX


JTDX Control Panel

Ian Morrison
 

I cannot change mode using the JTDX control panel. The colour follows the mode set using the main JTDX screen. Everything else works on the panel.

Latest version of V4

Thanks, Ian

VE3EP

 

 

Sent from Mail for Windows 10

 


Re: BAD.adi

Bob
 

You have two choices: a) fix the CNTY field for each QSO rejected, or forget the CNTY field and import the QSO anyway. Take your pick.
 
If you decide you really don't care about the CNTY, then edit the ADIF file (using Notepad or something), and do a global replace of <CNTY: to <xCNTY:  Then change the name of the file from BAD.ADI to GOOD.ADI and import it. There is no ADIF defined xCNTY field, so it is ignored.
 
And, if your curious, you might want to analize a couple of the rejected QSOs to determine exactly what is wrong with them. If you don't know how, just copy and paste a couple of QSOs here, and we can take a peek.
 
SeventyThree(s).

On 01/30/2021 3:07 PM Ron Smith <n7rd@...> wrote:
 
 
New to group, just uploaded adif file to Logger32.  Ended up with 1713 Q's in BAD.adi.  Opened with Note Book and all are marked CNTY.  All the listings have cnty then a number, how do I repair this huge file and get these contacts into the program?  
 
Thanks in advance.
 
 

 
--
Best Regards,
 
Ron N7RD


Re: Question JTDX Control Panel

Barry GM4GIF
 

I’ve got it on my iPad, very clickable hi

73 de Barry/gm4gif


Re: Question JTDX Control Panel

Gary Hinson
 

… or possibly a laptop/chromebook/thing on the side to browse/search the PDF while working DX on the main shack PC.

 

Secondhand medium sized LCD displays are cheap these days as gamers and others upgrade to their whole-wall-sized curved 0.5 ms 170-degree UHD++ holographic displays.  That is, provided your PC has dual video outputs … and for our purposes, even a low-end graphics card can easily cope with Logger32 updating its band maps during CQ WW.

 

Oh and you need a wide and strong-enough operating desk for all this tech stuff, or a wall-mounted monitor arm.

 

73

Gary  ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of John, G4DRS via groups.io
Sent: 31 January 2021 08:37
To: hamlogger@groups.io
Subject: Re: [hamlogger] Question JTDX Control Panel

 

On Mon, Jan 25, 2021 at 07:49 PM, Tom Wylie wrote:

try to follow a manual on a screen whilst trying to do what the manual says on the same screen

Tom,
You need more screens!


John
G4DRS


BAD.adi

Ron Smith <n7rd@...>
 

New to group, just uploaded adif file to Logger32.  Ended up with 1713 Q's in BAD.adi.  Opened with Note Book and all are marked CNTY.  All the listings have cnty then a number, how do I repair this huge file and get these contacts into the program?  

Thanks in advance.




--
Best Regards,

Ron N7RD


Re: Secondary Admin Award problem

José L. Oliva - EA4ZQ
 

Thanks Bob. I was sure it was my error..


Re: Question JTDX Control Panel

John, G4DRS
 

On Mon, Jan 25, 2021 at 07:49 PM, Tom Wylie wrote:
try to follow a manual on a screen whilst trying to do what the manual says on the same screen
Tom,
You need more screens!


John
G4DRS


Re: DX Spots (Window)

Paul Scarratt
 

Cheers John that done it.


Re: DX Spots (Window)

John Munton - G7SSE
 

Paul

Right click in the DX Spots Window, then select:

Setup > Appearance > Telnet spots forecolor

73

John - G7SSE

------ Original Message ------
From: "Paul Scarratt via groups.io" <g0wre@...>
Sent: 30/01/2021 17:51:31
Subject: Re: [hamlogger] DX Spots (Window)

Hi Mike.

I have just read my post again and I should say the Font Colour will not change sorry.

Regards Paul G0WRE

--
73, John - G7SSE


Re: DX Spots (Window)

Paul Scarratt
 

Hi Mike.

I have just read my post again and I should say the Font Colour will not change sorry.

Regards Paul G0WRE


Re: DX Spots (Window)

Mike
 

RMB on dx spots window, Setup, Appearance and from the top you change.
Mike


DX Spots (Window)

Paul Scarratt
 

Hi Guys,

I hope this makes sense, I'm trying to adjust the fonts and especially the colour of the font in the DX Spots window,

I can change the font size etc but the colour does not change but it does on the Logbook page !

I'm going to VIEW=GRID APPEARENCE=GRIDS FONT/COLOUR or is the settings for this somewhere else?

Running Windows 10 Logger32 v4.0.238 

Regards Paul G0WRE


Re: Secondary Admin Award problem

Bob
 

Pepe, right click on the callsign field of the logbook entry window. Click on SETUP | SETUP QSO MASK. The window that opens shows all the fields that are copied from previous QSOs to new QSOs. UNcheck the secondary admin field (it shows the name of the field in the logbook entry window). UN check the field at the top and bottom of the window. Click APPLY. 
 
SeventyThree(s).

On 01/30/2021 11:22 AM José L. Oliva - EA4ZQ <joseluis.oliva@...> wrote:
 
 
Spanish L32 group has created a secondary admin award file, called DVGE (Geodesic Points of Spain). It's a nice diplom with about 2000 references, most of them in countryside and mountains. (Not as sota, but funny, hi, hi...)
I had some stations that activated several places but, when I fill Subdivision Admin window with one reference. L32 changes all other references with same callsign.  ??
 
I put EC7AT/P with ref CO-002
I put EC7AT/P with ref CO-004 and changes all award references from EC7AT/P as CO-004
 
I don't know if there is a "multiple locations" option or is a bug, or anything else.
Other users said all is right, then problem is mine, but I don't know where....

Thanks.
Pepe EA4ZQ

2261 - 2280 of 84592