|
Re: 2 different calls
Paul F6EXV
I have created the following shortcuts :
toggle quoted messageShow quoted text
jtdx.exe --rig-name=F6EXV and jtdx.exe --rig-name=F4KMA but I gat a message saying that if I moduiify the extension, the program may not work. When I want to set up the utilities, these shortcuts do not appear, so I cannot have the utility program aim at the proper JTDX instance... 73 Paul F6EXV
Le 23/09/2020 à 11:39, ja1nlx a écrit :
Make a another Logger32 short cut like --
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. https://www.avast.com/antivirus
|
|
|
|
Re: 2 different calls
Paul F6EXV
Thanks for additionjal info.
toggle quoted messageShow quoted text
For example, can I write jtdx.exe --F6EXV and the other one jtdx.exe --F4KMA Or are the words --rig-name compulsory ? Thanks + 73 Paul F6EXV
Le 23/09/2020 à 11:39, ja1nlx a écrit :
Make a another Logger32 short cut like --
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. https://www.avast.com/antivirus
|
|
|
|
Re: 2 different calls
ja1nlx
Make a another Logger32 short cut like
toggle quoted messageShow quoted text
C:\Logger32\Logger32.exe Logger32_Contest C:\Logger32\Logger32.exe Logger32_TS480 etc Make another JTDX shortcut using unique rig name like C:\JTDX64\bin\jtdx.exe --rig-name=K3 C:\JTDX64\bin\jtdx.exe --rig-name=TS480 etc You can make another setup for each shortcut. 73
On 2020/09/23 18:29, Paul F6EXV wrote:
Hello and thanks for the link. --
73 de aki JA1NLX
|
|
|
|
Re: 2 different calls
F4FQH Olivier
Hi
I have 2 logger32 working at the same time
somtimes.
They are installed in different
directorys
The name of the .EXE of logger32 must be
changed
A JTDX with a configuration for 2 instances (not in
my setup)
And all is ok
73
Olivier
F4FQH
From: ja1nlx
Sent: Wednesday, September 23, 2020 11:10 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] 2 different calls Paul Read "Setting up a Second Logger32 INI File" section in Logger32 Help. 73 On 2020/09/23 17:42, Paul F6EXV wrote: > Hi all > I have two different callsigns that I ue daily. > I want the logs to be totally separated, not together in one (with 2 > different operators) because statistics would be wrong. > I also wish to set up 2 LogSync and 2 JTDX, so that when I launch L32, > both LogSync and JTDX are attached to their respecitive callsigns . > I do not necessarily want these 2 groups of programs to be launched > simultabneously. > How can I set 2 shortcuts so they direct to the proper instances ? > > Thanks for your help and suggestions. > 73 > Paul F6EXV > -- 73 de aki JA1NLX
|
|
|
|
Re: 2 different calls
Paul F6EXV
Hello and thanks for the link.
toggle quoted messageShow quoted text
I am not a geek and I am unable to follow the instructions. I already have my existing log, with its related instances of LogSync and JTDX (and its JTDX log) It shows as "Configuration - Default" I have created another shortcut but it does not show as a different choice. What am I doing wrong ? I am using Win10 and version 3.50.422 Thanks + 73 Paul F6EXV
Le 23/09/2020 à 11:10, ja1nlx a écrit :
Paul --
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. https://www.avast.com/antivirus
|
|
|
|
Re: 2 different calls
ja1nlx
Paul
toggle quoted messageShow quoted text
Read "Setting up a Second Logger32 INI File" section in Logger32 Help. 73
On 2020/09/23 17:42, Paul F6EXV wrote:
Hi all --
73 de aki JA1NLX
|
|
|
|
2 different calls
Paul F6EXV
Hi all
I have two different callsigns that I ue daily. I want the logs to be totally separated, not together in one (with 2 different operators) because statistics would be wrong. I also wish to set up 2 LogSync and 2 JTDX, so that when I launch L32, both LogSync and JTDX are attached to their respecitive callsigns . I do not necessarily want these 2 groups of programs to be launched simultabneously. How can I set 2 shortcuts so they direct to the proper instances ? Thanks for your help and suggestions. 73 Paul F6EXV -- L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. https://www.avast.com/antivirus
|
|
|
|
Re: LoTW
Luis EA5L
Thanks Rick
I'll wait for the next update.
Congratulations on this great software.
|
|
|
|
A request ...
Bob
Hi, this is addressed primarily to Italian and Spanish users ...
Please do this:
a) Click TOOLS | DATABASE MAINTENANCE | COUNTRY/PREFIX MAINTENANCE. Scroll down to select I or EA. Now click on the row.
b) Look at the list of alternative prefixes. To me, the Offset location is 4worthless/meaningless.
What I would like to see is a list of prefixes that makes sense to me, and all the other International users. So, here is what I'm requesting is that if someone/anyone is interested in improving the quality/usability/intelligibility of the list of prefixes, you collectively work together to develop a new list. If you can do this, I will write a program to update/convert the current database.
The databases in Logger32 are yours to modify. You are provided with working/functional examples only. Enjoy. SeventyThree(s).
PS. To any ZS users who might actually read this. Don't ask for me to change ZS6 from Transvaal to Gauteng. Not in my lifetime. But you are free to change it yourself if you must.
|
|
|
|
Re: Problem with cluster
F5SZY
Thank you very much Dusan for your help.
Best regards . F5SZY / Yves
|
|
|
|
Re: Problem with cluster
Dusan <ceha@...>
HI Yves, Switch of Kaspersky Secure Connection, start Logger and cluster and then you can start Kaspersky and everything works fine. 73 Dusan YU1EA
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of F5SZY via groups.io
On Sat, Sep 19, 2020 at 09:10 PM, Dusan wrote:
Same problème for me also with Kaspersky Secure Connexion ( ON ). Is there a solution ?
|
|
|
|
Re: LoTW
Rick Ellison
Luis This is correct. There is no means for me to modify the eQSL flags in Logger32 at the moment. Once I get all the bugs worked out of the LOTW upload then I will add the same to eQSL..
73 Rick N2AMG
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Luis EA5L via groups.io
Hi Rick, Logsync marks the qso of lotw as sent but does not mark the eqsl as sent, if it uploads them correctly to eqsl but does not mark them in the L32 logbook, however, if it does so with lotw. I am doing something wrong? Thank you Luis EA5L
|
|
|
|
Re: Problem with cluster
F5SZY
On Sat, Sep 19, 2020 at 09:10 PM, Dusan wrote:
Same problème for me also with Kaspersky Secure Connexion ( ON ). Is there a solution ? I looked into the KSC setup settings but I dont't see or intervene. Tnx, best regards F5SZY/Yves
|
|
|
|
Re: LoTW
Hola Rick
Logsync marca el qso de lotw como enviado pero no marca el eqsl como enviado, si los carga correctamente a eqsl pero no los marca en el libro de registro L32, sin embargo, si lo hace con lotw.
Estoy haciendo algo mal?
Gracias
Luis
EA5L
|
|
|
|
Re: LoTW
Rick Ellison
The next time you do an upload turn Debug On. Then do the upload and after it is done turn Debug back Off. In the logsync directory you will find the DebugLog.txt file send that to me directly as an attachment..
toggle quoted messageShow quoted text
73 Rick N2AMG
-----Original Message-----
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Paul F6EXV Sent: Monday, September 21, 2020 10:59 AM To: hamlogger@groups.io Subject: Re: [hamlogger] LoTW Hi Rick Thanks for responding. Actually, I do not know if the problem lies in L32 or in LogSynch... The QSOs are indeed uploaded, but they do not show as such in L32. Any idea ? 73 Paul F6EXV Le 21/09/2020 à 16:56, Rick Ellison a écrit : Paul.. -- L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. https://www.avast.com/antivirus -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
|
|
|
|
Re: LoTW
Paul F6EXV
Hi Rick
toggle quoted messageShow quoted text
Thanks for responding. Actually, I do not know if the problem lies in L32 or in LogSynch... The QSOs are indeed uploaded, but they do not show as such in L32. Any idea ? 73 Paul F6EXV
Le 21/09/2020 à 16:56, Rick Ellison a écrit :
Paul.. --
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. https://www.avast.com/antivirus
|
|
|
|
Re: LoTW
Rick Ellison
Paul..
toggle quoted messageShow quoted text
Nothing has changed are you sure you are using the latest version?? I am working on a way to try and speed the process up but that version has not been released yet..In versions previous to the last one you had to tick the message box to mark them as sent but in the latest version you should not need to answer yes to that box and the flags will be changed when they are actually updated.. 73 Rick N2AMG
-----Original Message-----
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Paul F6EXV Sent: Monday, September 21, 2020 6:10 AM To: hamlogger@groups.io Subject: [hamlogger] LoTW Hi all When I upload a QSO through L32 LogSynch, it is not updated as sent on the log page, even though it really is sent. This used to work flawlessly. I now have to manually tick off the "Send LoTW QSL", and tick on the "LoTW QSL sent". I have re-installed L32 LogSynch, no change. Both programs talk to each other. Unless I am a sleep-walker, I have not changed anything in the configuration. Any idea ? Thanks + 73 Paul F6EXV -- L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. https://www.avast.com/antivirus -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
|
|
|
|
LoTW
Paul F6EXV
Hi all
When I upload a QSO through L32 LogSynch, it is not updated as sent on the log page, even though it really is sent. This used to work flawlessly. I now have to manually tick off the "Send LoTW QSL", and tick on the "LoTW QSL sent". I have re-installed L32 LogSynch, no change. Both programs talk to each other. Unless I am a sleep-walker, I have not changed anything in the configuration. Any idea ? Thanks + 73 Paul F6EXV -- L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. https://www.avast.com/antivirus
|
|
|
|
Re: Problem with cluster
Good to hear you have solved the problem Dusan. 73, John - G7SSE
------ Original Message ------
From: "Dusan" <ceha@...>
Sent: 19/09/2020 20:09:52
Subject: Re: [hamlogger] Problem with cluster Hi John, TNX for your reply, in the mean I found the problem, when my Kaspersky Secure connection is on, I am having this problem. Best regards, 73 Dusan YU1EA
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of John Munton - G7SSE
Dusan
The cluster node you are trying to connect to could be down. Try another and see if you can connect.
If needed, refer to Help file section - 3.7.2 Setup Remote hosts.
Here are some other nodes you can try;
PA4JJ-2 83.162.186.242 7300
73 John G7SSE
------ Original Message ------ From: "Dusan" <ceha@...> Sent: 19/09/2020 09:04:59 Subject: [hamlogger] Problem with cluster
Does any one have problem with cluster? When I try to start cluster, there is an error 4006 from Telnet socket -Winsock returned: Wrong protocol or connection state for the requested transaction or request. Any advice? TNX/73 Dusan YU1EA
-- 73, John - G7SSE
|
|
|
|
Re: Problem with cluster
Dusan <ceha@...>
Hi John, TNX for your reply, in the mean I found the problem, when my Kaspersky Secure connection is on, I am having this problem. Best regards, 73 Dusan YU1EA
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of John Munton - G7SSE
Sent: 19. septembar 2020 12:01 To: hamlogger@groups.io Subject: Re: [hamlogger] Problem with cluster
Dusan
The cluster node you are trying to connect to could be down. Try another and see if you can connect.
If needed, refer to Help file section - 3.7.2 Setup Remote hosts.
Here are some other nodes you can try;
PA4JJ-2 83.162.186.242 7300
73 John G7SSE
------ Original Message ------ From: "Dusan" <ceha@...> Sent: 19/09/2020 09:04:59 Subject: [hamlogger] Problem with cluster
Does any one have problem with cluster? When I try to start cluster, there is an error 4006 from Telnet socket -Winsock returned: Wrong protocol or connection state for the requested transaction or request. Any advice? TNX/73 Dusan YU1EA
|
|
|
