|
Re: QRZ MODULE
larry fields
If your talking about the QRZ Lookups for 32 many times and it keeps looking for it, I might have to delete it as it might have a conflict problem. Thanks and 73 Larry Fields: du1/n6hpx MANILA PH (PH:9163405944(GLOBE)) =============================== CLUBS ARRL DX1PAR, 7095 Khz DX1PRS 145.340 Mhz DX1AFP 432.440 Mhz
On Tue, Sep 8, 2020 at 1:58 AM Jim Cox <jcox123@...> wrote:
|
|
|
|
Re: QRZ MODULE
Jim Cox
Have you downloaded the qrz lookup module and installed it on the new
computer? Jim K4JAF
From: larry
fields
Sent: Monday, September 7, 2020 8:54 PM
To: hamlogger@groups.io
Subject: [hamlogger] QRZ MODULE I got a
newer computer which is WINDOWS 10 and when I attempt to log or connect to a
callsign it comes up with Can't Find QRZ Lookup Module how do I change this. I
recall once having this problem with a different computer that didn't have
enough memory inside. Any ideas on this problem.
Thanks and 73
Larry Fields: du1/n6hpx
MANILA PH (PH:9163405944(GLOBE))
===============================
CLUBS
ARRL
DX1PAR, 7095 Khz
DX1PRS 145.340 Mhz
DX1AFP 432.440 Mhz
|
|
|
|
Re: Cherry picking
Bob
I already answered this a week ago. 73
Steve, on the UDP BandMap. click CONFIG | CHERRY-PICKING OPTIONS. Two things to do here. Check CHERRY_PICK HIGHEST PRIORITY FIRST and UNcheck ENABLE SYMPATHY CALLS TO STATIONS CALLING CQ. Now click CONFIG | APPEARACE | HIGHLIGHT & TEXT COLORS. UNcheck all Gridsquare options. Click APPLY. The Cherry-picker will now only call highlighted callsigns on the UDP BandMap. Right click on the DX Spots Window. Click SETUP | APPEARANCE | DX SPOT HIGHLIGHT COLORS. Here you design your own personal LGBTQ flag. Click APPLY. SeventyThree(s).
PS. There are several additional options that allow you to see only highlighted callsigns on the UDP BandMap, or only those not previously worked. The choice is yours.
|
|
|
|
Cherry picking
Hi All,
Is there a way to configure cherry picking to *ONLY* pick new countries/DXCC entities?
Thanks, Steve G1XOW
|
|
|
|
QRZ MODULE
larry fields
I got a newer computer which is WINDOWS 10 and when I attempt to log or connect to a callsign it comes up with Can't Find QRZ Lookup Module how do I change this. I recall once having this problem with a different computer that didn't have enough memory inside. Any ideas on this problem. Thanks and 73 Larry Fields: du1/n6hpx MANILA PH (PH:9163405944(GLOBE)) =============================== CLUBS ARRL DX1PAR, 7095 Khz DX1PRS 145.340 Mhz DX1AFP 432.440 Mhz
|
|
|
|
Re: Logger 32 quits shortly after launch
Bob
No sub-directories in the \Logger32 directory? Huh? Either you have never installed a Logger32 update, or you deleted the \Logger32 folder (and it's sub-directories) before you reinstalled Logger32.
I think Jim has a valid point, it sounds like you're floundering. This is very dangerous while sitting in front of the keyboard.
You have Logger32 running on your laptop, so there's no urgency to this. You logs are in tact, and you can log QSOs.
When you attempt to upgrade, exactly what happens before the program quits? And, exactly what do you mean quits (a blinding flash and a smell of sulphur in the air)? When upgrading, there's an option to backup before updating. Is it on or off? Try it the other way. Good luck, 73.
|
|
|
|
Re: Logger 32 quits shortly after launch
Vilhjalmur Sigurjonsson
Steve, Before trying something drastic like reinstalling the Windows try the following: When Logger32 is not running rename Logger32.ini to Logger32.ini.old, then run Logger32. Does that behave differently? 73 Villi
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Steve
Hi Bob & Damian
|
|
|
|
Re: Logger 32 quits shortly after launch
Jim Altman
I would not reinstall windows. You are missing something probably fairly simple. Take a break from it. If there are no subdirectories in the L32 folder, are you installing to the same place you were before? You don’t need compatibility mode, only admin privileges.
Jim Altman jaltman636@...
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Steve
Sent: Monday, September 7, 2020 12:22 PM To: hamlogger@groups.io Subject: Re: [hamlogger] Logger 32 quits shortly after launch
Hi Bob & Damian
|
|
|
|
Re: Logger 32 quits shortly after launch
Hi Bob & Damian
Thanks both for taking the time to reply. Sorry, I probably didn't make myself clear. One day last month Logger stopped. Well not exactly - it would load, show the logbook (existing entries) and then quit. So I re-installed the program and it loads, (no logbook to look at of course). If I click 'yes' to Upgrade to version 3.5xxx it quits. If I say no, then it quits when I try to do anything else. So cant even load my adif file. The exe file is set to admin privlidges & I have tried ALL the compatability options (it used to work OK on XP SP3) - same result whichever is selected. There are no sub-folders in the Logger32 folder to go back to. I don't use WIndows Defender but Malwarebytes. I have added c:/Logger32 to the 'Allowed Page', again no difference. It is obviously something 'in' this desktop as the program works perfectly (with my .ini file & logbooks) on my Win 10 Home laptop. I don't want to but maybe a re-install of WIndows is the answer (or just use logger on my laptop!)
|
|
|
|
Re: A can of worms?
Bob
Graham, I have no objection to FST4 being added as an MFSK submode. However, I think you (collectively) have opened a can of worms and there will be much weeping, wailing, gnashing of teeth, and tearing of hair when FST4 hits the streets, and users of logging programs discover the ADIF specification does not accommodate each and every variety of FST4. Time will tell. SeventyThree(s).
|
|
|
|
Re: A can of worms?
Graham G3ZOD
Referring back to your original post, I'm not clear what the objection is although I think it's likely that FST4 shouldn't have been added at all to the specification.
73 de Graham G3ZOD
|
|
|
|
Re: Elecraft K4 ...
Bob
Thanks Mike. I have subsequently learned that adaptive predistortion will be added at some future date. And, yes CESSB was the subject of a QEX article some time ago. That I know of, the Flex 6000 series are the only ones to have implemented it. SeventyThree(s).
toggle quoted messageShow quoted text
On 09/06/2020 12:23 PM Michael Harris via groups.io <mike.harris=horizon.co.fk@groups.io> wrote:
|
|
|
|
Re: Elecraft K4 ...
Michael Harris
Hi Bob,
toggle quoted messageShow quoted text
All I can report is that there is a sample IN jack on the rear panel. https://www.youtube.com/c/ElecraftChannel a 24 minute presentation by Eric. Nothing on CESSB which sounds a bit like pre distortion by another name but is possibly a different DSP application. I read about it once a couple of years ago, in QEX maybe, but cannot remember much about it. Regards, Mike VP8NO
On 06/09/2020 11:46, Bob wrote:
Mike, which one, there are dozens of them. Some as old as two years ago. I have watched a couple, without actually learning anything other that it's a 'game changer', and 'it's better than sliced bread'. I have Googled extensively, but have not found a single hit that includes K4 and CESSB or K4 and predistortion. SeventyThree(s).On 09/06/2020 10:26 AM Michael Harris via groups.io <mike.harris=horizon.co.fk@groups.io> wrote:
|
|
|
|
Re: Elecraft K4 ...
Bob
Mike, which one, there are dozens of them. Some as old as two years ago. I have watched a couple, without actually learning anything other that it's a 'game changer', and 'it's better than sliced bread'. I have Googled extensively, but have not found a single hit that includes K4 and CESSB or K4 and predistortion. SeventyThree(s).
toggle quoted messageShow quoted text
On 09/06/2020 10:26 AM Michael Harris via groups.io <mike.harris=horizon.co.fk@groups.io> wrote:
|
|
|
|
Re: Elecraft K4 ...
Michael Harris
See the K4 presentation on the Elecraft You tube channel.
toggle quoted messageShow quoted text
Regards, Mike VP8NO
On 06/09/2020 10:56, Bob wrote:
Either no-one knows, or no-one cares. OK, let's try this - Does the K4 have/support CESSB or predistortion linearization? SeventyThree(s).
|
|
|
|
Re: Elecraft K4 ...
Bob
Either no-one knows, or no-one cares. OK, let's try this - Does the K4 have/support CESSB or predistortion linearization? SeventyThree(s).
|
|
|
|
Re: Logger 32 quits shortly after launch
DamianM0BKV
Sorry, Bob, for butting in, your help is probably easier to understand. I use 400 words When 40 will do (so I'm told)
Damian
|
|
|
|
Re: Logger 32 quits shortly after launch
DamianM0BKV
Some users of the logging program have carried out the update and the program disappeared either immediately or at the next bootup. This has happened recently to many users because many virus checkers think the new version has a virus and instead of asking you what to do they delete the main file 'Logger32.exe' from the main folder C:// Logger32/, This problem of virus checkers treating a file as a virus is called a FALSE NEGATIVE in the plumbing trade.I have had the problem with McAfee virus checker a while back. Numerous others have also since.
|
|
|
|
Re: Logger 32 quits shortly after launch
Bob
Steve, interesting problem. You say you have reinstalled Logger32 but you can't update. I assume you are now on version 3.50.0, and you're attempting to update to 3.50.422.
First off, check that Logger32 is configured to run with administrator privileges. Look in the \Logger32 directory for the Logger32.exe. Right click on the icon, click Properties. Select the Compatibility tab. Is the Run this program as administrator option checked?
If that doesn't help, then you could try something a little more drastic. First, make sure you have your logbook safely stored away in ADIF format. Look in the \Logger32 directory for folders called Updatefiles for ver 3.50.xxx. Copy the contents of the newest folder (I haven't counted them, but there is probably 15 files) into the \Logger32 directory. What you have done is upgrade Logger32 ver 3.50.0 to the release version prior to the one you were running on August 26.
Good luck, 73.
|
|
|
|
Logger 32 quits shortly after launch
I have never posted to Groups.io before, so apologies if I have done this wrong...
I have used Logger 32 for years without serious issues but this one has stumped me.
I run the latest version of Win 10 64bit (kept updated) & have up to date antivirus.
On 26th August I clicked on the link to open Logger as usual. The program opened, loaded the logbook (about 5000 entries) and then the program closed.
Since then I have re-installed the program but as soon as I click ‘yes’ to updating, Logger quits.
The program works perfectly on my Win 10 64bit laptop, so it is something peculiar to my desktop. I hadn’t changed anything or installed any new programmes and am out of ideas.
Anyone else had the same issue, if so what is the fix?
Any help gratefully received.
Steve G4UHM
|
|
|
