Date   

Re: My utility programs

ja1nlx
 

Dave

QRX

73

On 2020/08/20 22:17, ik2agx wrote:
Aki,

this link doesn't work



73, Dave
--
73 de aki
JA1NLX


Re: My utility programs

ik2agx
 

Aki,

this link doesn't work



73, Dave


My utility programs

ja1nlx
 

Recently I made some changes for Lookup and Summary series.

Go to my page at

http://ja1nlx.web.fc2.com/logger32/UtilityProgram/UtilityProgram.htm

--
73 de aki
JA1NLX


Re: Log Print error

jim watkins
 

Ok, I am almost there.

With help from George (VA3YV) I have the issue with my Log Print file corrected.

I hit File, Export Files, Export QSL file. In Log Print I pick this file. Now, I hit print labels, or even hit Preview, I get this error;


Runtime Error '13' Type Mismatch


What did I do, or not do, that would cause this error?

Thanks for your patience, not to savvy with computers.


73s

Jim Watkins 


VA3XOV / VO1SF

Never drive faster than your Guardian Angel can fly..



On Sunday, August 16, 2020, 10:14:35 p.m. EDT, jim watkins via groups.io <james_vo1sf@...> wrote:


I have finally set up Log Print on my new computer. When I try to edit my Log Print file, I get the error;

C:\Program Files (x86)\LogPrint\County Labels.ADI
You do not have permission to open this file.  See the owner of the file or an administrator to obtain permission.

I am the Administrator, or so I thought!!

How do I set permission in Log Print to make changes? 

73s

Jim Watkins 


VA3XOV / VO1SF

Never drive faster than your Guardian Angel can fly..



Re: Log Print error

jim watkins
 

Thanks Bill, I will try this when I get home later today.

73s

Jim Watkins 


VA3XOV / VO1SF

Never drive faster than your Guardian Angel can fly..



On Monday, August 17, 2020, 10:09:44 a.m. EDT, Bill Engel <k5dhy.groups@...> wrote:


The space character in the file name might be the cause.

Bill K5DHY





Re: Log Print error

F5SZY
 

Hi
The separation symbol in windows should be the point (.) and not the comma (,)
Best regards. F5SZY/Yves


Re: Log Print error

jim watkins
 

Ok, I am almost there.

With help from George (VA3YV) I have the issue with my Log Print file corrected.

I hit File, Export Files, Export QSL file. 

In Log Print I pick this file. Now, I hit print labels, or even hit Preview, I get this error;


Runtime Error '13' Type Mismatch


What did I do, or not do, that would cause this error?

Thanks for your patience, not to savvy with computers.


73s

Jim Watkins 


VA3XOV / VO1SF

Never drive faster than your Guardian Angel can fly..


_._,_._,_


Re: Log Print error

Bill Engel
 

The space character in the file name might be the cause.

Bill K5DHY


Log Print error

jim watkins
 

I have finally set up Log Print on my new computer. When I try to edit my Log Print file, I get the error;

C:\Program Files (x86)\LogPrint\County Labels.ADI
You do not have permission to open this file.  See the owner of the file or an administrator to obtain permission.

I am the Administrator, or so I thought!!

How do I set permission in Log Print to make changes? 

73s

Jim Watkins 


VA3XOV / VO1SF

Never drive faster than your Guardian Angel can fly..



Problem with BandMap

Ernö
 

Hi Guys!

In last time, the bandmap don't work properly.
I start Logger. Cluster starts automatically.
I send to clus  sh/dx for the last 50 qso.
It downloaded and i see all in the dx spots window and also in the bandmap. So far ok!
But after that, if a new qso comming up in dx spots window, i
don't see that anymore in the bandmap.
And after a while the band map will be empty. I make more rollback for several version. But always the same.
I don't remember changing anything before

.

Thank you in advance for your help.

73dx
HA1AR Ernö


Re: Logger 32 AND JTDX AND HDSDR and CWSKimmer ?

Bob
 

Daniel, add Microham to the long list of things that I don't know what they are, or what they are used for. 

Maybe we are talking at cross purposes, I don't know. What I do know is that if you plug the slave port into a radio, that radio will follow the main station radio. And, if configured correctly, changes to slave radio will change the main radio. 
What all the other hardware/software things you mention (HDSDR, Funcube, Omnirig, and Microham) are used for, I have no idea. 

SeventyThree(s).


On 08/16/2020 3:20 AM daniel lavocat <f6flu@...> wrote:


Hi
Thank you Bob for taking a little time to help me, I appreciate

I'm not sure, but I think we're not talking about the same thing
In summary I am looking to have a second CAT port
as does for example MicroHam :




or as DXLab does :



73
--



Bob a écrit le 15/08/2020 à 21:58 :
Correction ...

As you can see, every time I change JTDX mode from slave port sent a Kenwood formatted command to VFO-A to change the frequency.

should be

As you can see, every time I change JTDX mode the slave port sent a Kenwood formatted command to VFO-A to change frequency.

SeventyThree(s).
On 08/15/2020 3:49 PM Bob <k4cy@...> wrote:


Daniel, I don't know what HDSDR, Funcube, or Omnirig is/are. but as an experiment, I configured the slave port to talk Kenwood. I connected to JTDX, and opened the slave port debug window. I see this:

 

As you can see, every time I change JTDX mode from slave port sent a Kenwood formatted command to VFO-A to change the frequency. So, Logger32 appears to be working as expected. How you connect the port to your eye-candy radio is up to you. Pofites, Soixante-dix-trois.
On 08/15/2020 9:04 AM daniel lavocat <f6flu@...> wrote:


Hello

My configuration is as follows :
Yaesu FTdx5000 with a personal interface for digital mode (Digibox with stereo sound card)

Port Com Hardware for CAT is : COM #5 (generated by the Digibox interface)

I launch JTDX  (or WSJT) via the UDP menu of L32 which has the effect that L32 leaves the Com Port #5 to JTDX
and L32 reads the frequency from JTDX (See L32 Help § 5.4 Start)
JTDX is connected to the COM #5

and it works fine !!!

Now I would like to use my SDR (Funcub Pro +) via HDSDR program.
For this I use Omnirig (on the virtual port COM #9)

and I also connect CWSkimmer via Omnirig.

So I need an "echo" port of the com CAT (COM # 5) to a virtual port COM #9

I tried to use the "Echo Port" function and / or the "Slave port" function of L32 but it does not work.
For this I created a Virtual Pair with VSPE (Com #10 <==> COM #9) and set the Echo Port (or the Slave Port) to COM # 10

COM # 10 ==> Com #9 <==> Omnirig

I think it is me who does not know how to configure this (these) port(s)

Can You help me ?

Thanks and 73
Dan
--



Re: Feature suggestion

ja1nlx
 

Hi Frank

I am sorry but I do not remember. I checked FreqPad 4.7 and it works so far, however
there are something wrong.

OK if you ask me new FreqPad then please tell me feature detail you want. I will try again with VB.net.
Previously it was written with VB6.

73

On 2020/08/16 17:01, Frank - ON9CC / OT6M wrote:
Hi all,

in the past FreqPad by JA1NLX was available for the function Jim is asking.
I used FreqPad to create a list of beacons on 2m, 70cm and 23cm.
I could then just click on a beacon in the list and L32 would make my TRX switch to that QRG.
But ... I had issues with FreqPad in the past and asked JA1NLX to also add sepereate columns for QTF so i could easily sort on this column, which makes sense if your antenna is pointing in a specific direction and quickly check the beacons in that direction. Aki worked on Freqpad and sent me some beta versions, of which neither worked good (I think due to the combination of Windows10).
So I now use ver 4.7.

But ... (2) ... I just checked JA1NLX website and it seems that FreqPad is no longer available.
http://ja1nlx.web.fc2.com/logger32/UtilityProgram/UtilityProgram.htm
So indeed it would be good if this function could be implemented into L32 too ... don't know how difficult that is to program as I don't know anything of codes unfortunately.
Or you could ask Aki to make FreqPad available again.

--

73 Frank ON9CC
www.qrz.com/db/OT6M 

--
73 de aki
JA1NLX


Re: Feature suggestion

Frank - ON9CC / OT6M
 

Hi all,

in the past FreqPad by JA1NLX was available for the function Jim is asking.
I used FreqPad to create a list of beacons on 2m, 70cm and 23cm.
I could then just click on a beacon in the list and L32 would make my TRX switch to that QRG.
But ... I had issues with FreqPad in the past and asked JA1NLX to also add sepereate columns for QTF so i could easily sort on this column, which makes sense if your antenna is pointing in a specific direction and quickly check the beacons in that direction. Aki worked on Freqpad and sent me some beta versions, of which neither worked good (I think due to the combination of Windows10).
So I now use ver 4.7.

But ... (2) ... I just checked JA1NLX website and it seems that FreqPad is no longer available.
http://ja1nlx.web.fc2.com/logger32/UtilityProgram/UtilityProgram.htm
So indeed it would be good if this function could be implemented into L32 too ... don't know how difficult that is to program as I don't know anything of codes unfortunately.
Or you could ask Aki to make FreqPad available again.

--

73 Frank ON9CC
www.qrz.com/db/OT6M 


Re: Logger 32 AND JTDX AND HDSDR and CWSKimmer ?

daniel lavocat <F6FLU@...>
 

Hi
Thank you Bob for taking a little time to help me, I appreciate

I'm not sure, but I think we're not talking about the same thing
In summary I am looking to have a second CAT port
as does for example MicroHam :




or as DXLab does :



73
--



Bob a écrit le 15/08/2020 à 21:58 :

Correction ...

As you can see, every time I change JTDX mode from slave port sent a Kenwood formatted command to VFO-A to change the frequency.

should be

As you can see, every time I change JTDX mode the slave port sent a Kenwood formatted command to VFO-A to change frequency.

SeventyThree(s).
On 08/15/2020 3:49 PM Bob <k4cy@...> wrote:


Daniel, I don't know what HDSDR, Funcube, or Omnirig is/are. but as an experiment, I configured the slave port to talk Kenwood. I connected to JTDX, and opened the slave port debug window. I see this:

 

As you can see, every time I change JTDX mode from slave port sent a Kenwood formatted command to VFO-A to change the frequency. So, Logger32 appears to be working as expected. How you connect the port to your eye-candy radio is up to you. Pofites, Soixante-dix-trois.
On 08/15/2020 9:04 AM daniel lavocat <f6flu@...> wrote:


Hello

My configuration is as follows :
Yaesu FTdx5000 with a personal interface for digital mode (Digibox with stereo sound card)

Port Com Hardware for CAT is : COM #5 (generated by the Digibox interface)

I launch JTDX  (or WSJT) via the UDP menu of L32 which has the effect that L32 leaves the Com Port #5 to JTDX
and L32 reads the frequency from JTDX (See L32 Help § 5.4 Start)
JTDX is connected to the COM #5

and it works fine !!!

Now I would like to use my SDR (Funcub Pro +) via HDSDR program.
For this I use Omnirig (on the virtual port COM #9)

and I also connect CWSkimmer via Omnirig.

So I need an "echo" port of the com CAT (COM # 5) to a virtual port COM #9

I tried to use the "Echo Port" function and / or the "Slave port" function of L32 but it does not work.
For this I created a Virtual Pair with VSPE (Com #10 <==> COM #9) and set the Echo Port (or the Slave Port) to COM # 10

COM # 10 ==> Com #9 <==> Omnirig

I think it is me who does not know how to configure this (these) port(s)

Can You help me ?

Thanks and 73
Dan
--



Top story on the BBC tonight ...

Bob
 


Sorry to disappoint you, but 'no-code' is not in reference to Morse Code. It refers to the rapidly advancing/evolving ability/capability/technology to create/distribute fully functional computer applications without writing a single line of 'code' ...

Yes! Get this 800lb gorilla off my back. SeventyThree(s)AndBackToNetOverOver.


Re: Reversing Logger32 DATE Order Between Most Recent & Oldest

Gerald Boutin
 

Herb,

I think this is just the way it works. I see the same as you here. You can select different columns to sort on, but you cannot reverse the sort direction.

From the manual:

4.0 LOGBOOK COLUMNS CAN BE SORTED

By clicking on a column heading, Logger32 will display your QSOs in ascending order sorted on that column.  When you select a column sort, that column's header will be displayed in red

--
Gerald, VE1DT


Re: Reversing Logger32 DATE Order Between Most Recent & Oldest

ik2agx
 

Herb,

just order your Logbook page by QSO number, like this




73, Dave


Re: Reversing Logger32 DATE Order Between Most Recent & Oldest

 

I'm afraid not, Jim.  It remains with oldest on the bottom, newest on top. if I left click on CALL, it alphabetizes with Z's on the bottom, A;s on top.

I assume we are talking about the Logbook page.
73,
Herb AA2BF


Re: Logger 32 AND JTDX AND HDSDR and CWSKimmer ?

Bob
 

Correction ...

As you can see, every time I change JTDX mode from slave port sent a Kenwood formatted command to VFO-A to change the frequency.

should be

As you can see, every time I change JTDX mode the slave port sent a Kenwood formatted command to VFO-A to change frequency.

SeventyThree(s).

On 08/15/2020 3:49 PM Bob <k4cy@...> wrote:


Daniel, I don't know what HDSDR, Funcube, or Omnirig is/are. but as an experiment, I configured the slave port to talk Kenwood. I connected to JTDX, and opened the slave port debug window. I see this:

 

As you can see, every time I change JTDX mode from slave port sent a Kenwood formatted command to VFO-A to change the frequency. So, Logger32 appears to be working as expected. How you connect the port to your eye-candy radio is up to you. Pofites, Soixante-dix-trois.
On 08/15/2020 9:04 AM daniel lavocat <f6flu@...> wrote:


Hello

My configuration is as follows :
Yaesu FTdx5000 with a personal interface for digital mode (Digibox with stereo sound card)

Port Com Hardware for CAT is : COM #5 (generated by the Digibox interface)

I launch JTDX  (or WSJT) via the UDP menu of L32 which has the effect that L32 leaves the Com Port #5 to JTDX
and L32 reads the frequency from JTDX (See L32 Help § 5.4 Start)
JTDX is connected to the COM #5

and it works fine !!!

Now I would like to use my SDR (Funcub Pro +) via HDSDR program.
For this I use Omnirig (on the virtual port COM #9)

and I also connect CWSkimmer via Omnirig.

So I need an "echo" port of the com CAT (COM # 5) to a virtual port COM #9

I tried to use the "Echo Port" function and / or the "Slave port" function of L32 but it does not work.
For this I created a Virtual Pair with VSPE (Com #10 <==> COM #9) and set the Echo Port (or the Slave Port) to COM # 10

COM # 10 ==> Com #9 <==> Omnirig

I think it is me who does not know how to configure this (these) port(s)

Can You help me ?

Thanks and 73
Dan
--


Re: Logger 32 AND JTDX AND HDSDR and CWSKimmer ?

Bob
 

Daniel, I don't know what HDSDR, Funcube, or Omnirig is/are. but as an experiment, I configured the slave port to talk Kenwood. I connected to JTDX, and opened the slave port debug window. I see this:

 

As you can see, every time I change JTDX mode from slave port sent a Kenwood formatted command to VFO-A to change the frequency. So, Logger32 appears to be working as expected. How you connect the port to your eye-candy radio is up to you. Pofites, Soixante-dix-trois.

On 08/15/2020 9:04 AM daniel lavocat <f6flu@...> wrote:


Hello

My configuration is as follows :
Yaesu FTdx5000 with a personal interface for digital mode (Digibox with stereo sound card)

Port Com Hardware for CAT is : COM #5 (generated by the Digibox interface)

I launch JTDX  (or WSJT) via the UDP menu of L32 which has the effect that L32 leaves the Com Port #5 to JTDX
and L32 reads the frequency from JTDX (See L32 Help § 5.4 Start)
JTDX is connected to the COM #5

and it works fine !!!

Now I would like to use my SDR (Funcub Pro +) via HDSDR program.
For this I use Omnirig (on the virtual port COM #9)

and I also connect CWSkimmer via Omnirig.

So I need an "echo" port of the com CAT (COM # 5) to a virtual port COM #9

I tried to use the "Echo Port" function and / or the "Slave port" function of L32 but it does not work.
For this I created a Virtual Pair with VSPE (Com #10 <==> COM #9) and set the Echo Port (or the Slave Port) to COM # 10

COM # 10 ==> Com #9 <==> Omnirig

I think it is me who does not know how to configure this (these) port(s)

Can You help me ?

Thanks and 73
Dan
--

3241 - 3260 of 84170