|
Name missing in L32Lookups
Phill Morris (G6EES)
I know there have already been some emails on this topic, but I cant seem to find the solution
The problem I have is that the name field is not being populated in the 'QRZ Subscriber Lookup' window and also not in the 'L32 Logbook page'. I am running Logger32 V3.50.419 and L32Lookups V1.0.17.1 Attached is a screenshot example where the name is given in the QRZ page, but it has not been populated into Looger32 Sorry if the L32 guru's have already said that your are working on a solution (I missed that), but I wonder if there is anything that I need to (re-) configure to bring back this transfer of name info as it was working in the past (or indeed if I am asking the right forum and maybe it should be direct my question to the N2AMG site?) Thanks Phill G6EES
|
||
|
|
||
|
Re: You can tell a Ferrari by the sound of its Engine
Colin
Nice one Bob. 73 Colin, G3PSM
On 19/07/2020 03:57, Bob wrote:
|
||
|
|
||
|
Re: A new version
Hi Bob. Thanks for your reply, yes it’s the add on app I was referring to. Glad y like the shades, unfortunately the are tradition glasses hi. Goof luck keep well and stay safe. 73 Fred G3YJQ
On 19 Jul 2020, at 00:43, Bob <k4cy@...> wrote:
|
||
|
|
||
|
You can tell a Ferrari by the sound of its Engine
Bob
Not only is the the funniest video I've seen in a VERY long time, but it is the absolute perfect portrait of Ham Radio 2020 ...
|
||
|
|
||
|
Re: A new version
Bob
You dinosaur you ...
toggle quoted messageShow quoted text
On 07/18/2020 10:05 PM Michael Harris via groups.io <mike.harris=horizon.co.fk@groups.io> wrote:
|
||
|
|
||
|
Re: A new version
Michael Harris
Couldn't possibly comment, I conduct my QSO's by radio not the Internet.
toggle quoted messageShow quoted text
Regards, Mike VP8NO
On 18/07/2020 20:43, Bob wrote:
I assume you're referring to the N2AMG L32Lookups utility that accesses the QRZ.COM database (on this reflector, it's always dangerous to assume anything). This is not a utility that I use, but seeing as four thousand other subscribers were too damn idle/lazy to comment, I update to ver 1.0.17.1 ... works for me ... You're Fred in IO70vj and wear cool shades. SeventyThree(s).On 07/18/2020 7:01 AM Fred Bourne <g3yjq@g3yjq.uk> wrote:
|
||
|
|
||
|
Re: A new version
Bob
I assume you're referring to the N2AMG L32Lookups utility that accesses the QRZ.COM database (on this reflector, it's always dangerous to assume anything). This is not a utility that I use, but seeing as four thousand other subscribers were too damn idle/lazy to comment, I update to ver 1.0.17.1 ... works for me ... You're Fred in IO70vj and wear cool shades. SeventyThree(s).
|
||
|
|
||
|
Correction ...
Bob
In an earlier message I said I needed the assistance of a Python programmer to modify JTDX to to allow Logger32 to directly interact with the JTDX controls. This afternoon, I looked inside JTDX, and it is C++, not Python. So if you are a C++ whiz and want to get your name in lights, now it your chance. SeventyThree(s).
|
||
|
|
||
|
Re: A new version
Hi.
toggle quoted messageShow quoted text
Just did more checking out of the New update, now I find that the grid is not populating as well as the name. Many thanks 73 Fred G3YJQ
On 18 Jul 2020, at 11:19, Fred Bourne <g3yjq@...> wrote:
|
||
|
|
||
|
Re: A new version
Hi
toggle quoted messageShow quoted text
Having read all about the lake of coping the name into the name field, I didn’t have a problem with it. But now I have done an update the new version doesn’t copy the name into the name field. Any help would be greatly received. I run w10 on a i7 machine 73 Fred G3YJQ
On 18 Jul 2020, at 10:33, Jerzy Smietanski SP9AUV <sp9auv@...> wrote:
|
||
|
|
||
|
A new version program BUREAU_ALL_QRZ_COM_v 2.5.3.1 , AWARD_SECRETARY_v_3.0.3 , DXCC_XML_list_ver_1.1.4
Jerzy Smietanski SP9AUV
Hello all ! I inform , that I do a new version program
BUREAU_ALL_QRZ_COM_v 2.5.3.1 , http://sp9auv.com/EN/index.html?downloading_programs_cooperating_with_logger32.php cooperating with Logger32 and 4-tj server type QRZ for personal data for ham-radio . ================================================================= Also I do changes in a program AWARD_SECRETARY_v_3.0.3
http://sp9auv.com/EN/index.html?download_project_award_secretary_and_version_history.php and in a DXCC_XML_list_ver_1.1.4
http://sp9auv.com/EN/index.html?downloading_program_dxcc_xml_list_exe.php Now this programs not stop when downlading this file . Vy 73 de Jerzy SP9AUV
|
||
|
|
||
|
Re: QRZ Lookup
All I noticed was the date on the program L32Lookups was not 15/7/2020 which it is now (15/3/? Possible) and L32LookupsUpdater was and still is 17/5/2020 (I think it was) Cant remember seeing any error messages. All working now although not sure about AutoUpdate. Damian
Sent from Mail for Windows 10
From: John
Sent: 16 July 2020 00:02 To: hamlogger@groups.io Subject: Re: [hamlogger] QRZ Lookup
I think it said ( did not complete ) , something like that.
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Rick Ellison
What did the auto installer say?? Was there an error message or what was the issue??
73 Rick N2AMG
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of John
The auto installer did not work. I went to your web site and downloaded it from there.
All good again.
Thanks Rick
John WB9PNU
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Rick Ellison
Are you getting the update file?? It should run the installer which will update the file that is on your computer. If doesn’t work remove the program thru the programs/features page in the control panel then download the installer from my website and run it that way. It should install back in the directory where you had it..
73 Rick N2AMG
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of DamianM0BKV via groups.io
Still got a problem. Tried update and installation a few times but no luck. Perhaps Im not updating correctly?
|
||
|
|
||
|
Re: QRZ Lookup
John
I think it said ( did not complete ) , something like that.
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Rick Ellison
Sent: Wednesday, July 15, 2020 5:11 PM To: hamlogger@groups.io Subject: Re: [hamlogger] QRZ Lookup
What did the auto installer say?? Was there an error message or what was the issue??
73 Rick N2AMG
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of John
The auto installer did not work. I went to your web site and downloaded it from there.
All good again.
Thanks Rick
John WB9PNU
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Rick Ellison
Are you getting the update file?? It should run the installer which will update the file that is on your computer. If doesn’t work remove the program thru the programs/features page in the control panel then download the installer from my website and run it that way. It should install back in the directory where you had it..
73 Rick N2AMG
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of DamianM0BKV via groups.io
Still got a problem. Tried update and installation a few times but no luck. Perhaps Im not updating correctly?
|
||
|
|
||
|
Re: QRZ Lookup
Rick Ellison
What did the auto installer say?? Was there an error message or what was the issue??
73 Rick N2AMG
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of John
Sent: Wednesday, July 15, 2020 4:47 PM To: hamlogger@groups.io Subject: Re: [hamlogger] QRZ Lookup
The auto installer did not work. I went to your web site and downloaded it from there.
All good again.
Thanks Rick
John WB9PNU
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Rick Ellison
Are you getting the update file?? It should run the installer which will update the file that is on your computer. If doesn’t work remove the program thru the programs/features page in the control panel then download the installer from my website and run it that way. It should install back in the directory where you had it..
73 Rick N2AMG
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of DamianM0BKV via groups.io
Still got a problem. Tried update and installation a few times but no luck. Perhaps Im not updating correctly?
|
||
|
|
||
|
Re: QRZ Lookup
Hoorah got it working. I did wipe out all the old version files and uninstalled it. Uploaded from your website Rick and reinstalled. Also closed Logger32 and booted it up again. Anyway thanks Rick.
|
||
|
|
||
|
Re: QRZ Lookup
John
The auto installer did not work. I went to your web site and downloaded it from there.
All good again.
Thanks Rick
John WB9PNU
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Rick Ellison
Sent: Wednesday, July 15, 2020 2:31 PM To: hamlogger@groups.io Subject: Re: [hamlogger] QRZ Lookup
Are you getting the update file?? It should run the installer which will update the file that is on your computer. If doesn’t work remove the program thru the programs/features page in the control panel then download the installer from my website and run it that way. It should install back in the directory where you had it..
73 Rick N2AMG
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of DamianM0BKV via groups.io
Still got a problem. Tried update and installation a few times but no luck. Perhaps Im not updating correctly?
|
||
|
|
||
|
Re: Logger32
n5kd
TCM…. It’s in the same file as OmniRig……..
<I crack myself up sometimes>.
73’ Pete, N5KD.
Sent from Mail for Windows 10
From: Bob
Sent: Wednesday, July 15, 2020 5:17 PM To: hamlogger@groups.io; Tom Wylie Subject: Re: [hamlogger] Logger32
Tom, thanks for elaborating what TCM stands for. Unfortunately (even after Googlingit) I have no idea what it is, what it does, or why anyone needs it. So, the short answer is - No. SeventyThree(s).
> On 07/15/2020 9:28 AM Tom Wylie <thomasgwylie@...> wrote: > > > Hi Bob > > Are there any plans to introduce TCI - Transceiver Control Interface > > into Logger 32 - anytime soon or anytime at all? > > Tom > GM4FDM > > > >
|
||
|
|
||
|
Re: QRZ Lookup
Tried removing and installed the updater from website but no luck. Leave it tonight try again tomorrow.
|
||
|
|
||
|
Re: QRZ Lookup
Rick Ellison
Are you getting the update file?? It should run the installer which will update the file that is on your computer. If doesn’t work remove the program thru the programs/features page in the control panel then download the installer from my website and run it that way. It should install back in the directory where you had it..
73 Rick N2AMG
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of DamianM0BKV via groups.io
Still got a problem. Tried update and installation a few times but no luck. Perhaps Im not updating correctly?
|
||
|
|
||
|
Re: QRZ Lookup
Rick Ellison
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of DamianM0BKV via groups.io
Still got a problem. Tried update and installation a few times but no luck. Perhaps Im not updating correctly?
|
||
|
|
