Date   

Re: QRZ Lookup

Rick Ellison
 

 

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of DamianM0BKV via groups.io
Sent: Wednesday, July 15, 2020 3:12 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] QRZ Lookup

 

Still got a problem. Tried update and installation a few times but no luck. Perhaps Im not updating correctly?


Virus-free. www.avast.com


Re: QRZ Lookup

Michael Buckle
 

I don't have access to updates either?

On 15/07/2020 20:11, DamianM0BKV via groups.io wrote:
Still got a problem. Tried update and installation a few times but no luck. Perhaps Im not updating correctly?


Re: QRZ Lookup

DamianM0BKV
 

Still got a problem. Tried update and installation a few times but no luck. Perhaps Im not updating correctly?


Re: Logger32

Bob
 

Tom, I see ExpertSDR is listed as a supported radio. As I recall they asked me to implement it. I did, and asked them to test/verify it. I never heard back. I have no idea if/how it works. SeventyThree(s).

On 07/15/2020 12:28 PM Tom Wylie <thomasgwylie@...> wrote:


Am thinking of the expert sunsdr2 DX


Tom 
GM4FDM 

On Wed, 15 Jul 2020, 16:02 Vilhjalmur Sigurjonsson, < vilhj@...> wrote:
I just wonder, what would that do that the RCP (Radio Control Panel) does not do now?
73 Villi
TF3VS

-----Original Message-----
From: hamlogger@groups.io [mailto: hamlogger@groups.io] On Behalf Of Tom Wylie
Sent: miðvikudagur, 15. júlí 2020 13:29
To: hamlogger@groups.io
Subject: [hamlogger] Logger32

Hi Bob

Are there any plans to introduce TCI   -  Transceiver Control Interface

into Logger 32 - anytime soon or anytime at all?

Tom
GM4FDM










Re: Logger32

Bob
 

Tom, thanks for elaborating what TCM stands for. Unfortunately (even after Googlingit) I have no idea what it is, what it does, or why anyone needs it. So, the short answer is - No. SeventyThree(s).

On 07/15/2020 9:28 AM Tom Wylie <thomasgwylie@gmail.com> wrote:


Hi Bob

Are there any plans to introduce TCI - Transceiver Control Interface

into Logger 32 - anytime soon or anytime at all?

Tom
GM4FDM




Re: QRZ Lookup

NICK K. PLUMIDAKIS
 

Dear Rick Hi.

Everything back in order.

TNKS

Best 73’s

Nick

SV1VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Rick Ellison
Sent: Wednesday, July 15, 2020 19:30
To: hamlogger@groups.io
Subject: Re: [hamlogger] QRZ Lookup

 

In the next 24 hours whenever the Lookup checks the server you should get a notice of an update for L32Lookups. Or you can click Setup/Check for updates and it should tell you there is an update.

This should fix the QRZ lookup until they change something else…

 

73 Rick N2AMG

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Rick Ellison
Sent: Wednesday, July 15, 2020 10:53 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] QRZ Lookup

 

The ones that are having this problem could you turn Debug on and do a couple of lookups and then turn debug off.

In the directory where L32Lookups is installed you will find a file called L32LookupsDebugLog.txt attach that to an email and send it to me.

Looking at the changes at to the xml interface that should not be changing the name format.

 

73 Rick N2AMG

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of John
Sent: Wednesday, July 15, 2020 9:59 AM
To: hamlogger@groups.io
Subject: [hamlogger] QRZ Lookup

 

After years of using Logger16 and logger32, I actually have a problem.

 

Starting this morning, the “ NAME “ no longer transfers from qrz.com.

 

Any ideas ??

 

John

WB9PNU

 

 

 

Image removed by sender.

Virus-free. www.avg.com


Re: QRZ Lookup

Rick Ellison
 

In the next 24 hours whenever the Lookup checks the server you should get a notice of an update for L32Lookups. Or you can click Setup/Check for updates and it should tell you there is an update.

This should fix the QRZ lookup until they change something else…

 

73 Rick N2AMG

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Rick Ellison
Sent: Wednesday, July 15, 2020 10:53 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] QRZ Lookup

 

The ones that are having this problem could you turn Debug on and do a couple of lookups and then turn debug off.

In the directory where L32Lookups is installed you will find a file called L32LookupsDebugLog.txt attach that to an email and send it to me.

Looking at the changes at to the xml interface that should not be changing the name format.

 

73 Rick N2AMG

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of John
Sent: Wednesday, July 15, 2020 9:59 AM
To: hamlogger@groups.io
Subject: [hamlogger] QRZ Lookup

 

After years of using Logger16 and logger32, I actually have a problem.

 

Starting this morning, the “ NAME “ no longer transfers from qrz.com.

 

Any ideas ??

 

John

WB9PNU

 

 

 

Image removed by sender.

Virus-free. www.avg.com


Re: Logger32

Tom Wylie
 

Am thinking of the expert sunsdr2 DX


Tom 
GM4FDM 

On Wed, 15 Jul 2020, 16:02 Vilhjalmur Sigurjonsson, <vilhj@...> wrote:
I just wonder, what would that do that the RCP (Radio Control Panel) does not do now?
73 Villi
TF3VS

-----Original Message-----
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Tom Wylie
Sent: miðvikudagur, 15. júlí 2020 13:29
To: hamlogger@groups.io
Subject: [hamlogger] Logger32

Hi Bob

Are there any plans to introduce TCI   -  Transceiver Control Interface

into Logger 32 - anytime soon or anytime at all?

Tom
GM4FDM










Re: QRZ Lookup

Rick Ellison
 

I see the issue it’s in the format they use for the html I have to figure a way around it.. Hold the fort…

 

73 Rick

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of John
Sent: Wednesday, July 15, 2020 9:59 AM
To: hamlogger@groups.io
Subject: [hamlogger] QRZ Lookup

 

After years of using Logger16 and logger32, I actually have a problem.

 

Starting this morning, the “ NAME “ no longer transfers from qrz.com.

 

Any ideas ??

 

John

WB9PNU

 

 

 

 

 


Virus-free. www.avast.com


Re: Logger32

Vilhjalmur Sigurjonsson
 

I just wonder, what would that do that the RCP (Radio Control Panel) does not do now?
73 Villi
TF3VS

-----Original Message-----
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Tom Wylie
Sent: miðvikudagur, 15. júlí 2020 13:29
To: hamlogger@groups.io
Subject: [hamlogger] Logger32

Hi Bob

Are there any plans to introduce TCI - Transceiver Control Interface

into Logger 32 - anytime soon or anytime at all?

Tom
GM4FDM


Re: QRZ Lookup

Rick Ellison
 

The ones that are having this problem could you turn Debug on and do a couple of lookups and then turn debug off.

In the directory where L32Lookups is installed you will find a file called L32LookupsDebugLog.txt attach that to an email and send it to me.

Looking at the changes at to the xml interface that should not be changing the name format.

 

73 Rick N2AMG

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of John
Sent: Wednesday, July 15, 2020 9:59 AM
To: hamlogger@groups.io
Subject: [hamlogger] QRZ Lookup

 

After years of using Logger16 and logger32, I actually have a problem.

 

Starting this morning, the “ NAME “ no longer transfers from qrz.com.

 

Any ideas ??

 

John

WB9PNU

 

 

 

Image removed by sender.

Virus-free. www.avg.com


QRZ HTML lookup

Svein Henriksen
 

As of yesterday, automatic QRZ HTML lookup from Logger32 no longer works properly.

Lookup works and all the information comes up but the name.

The name filed is empty.

If I log in to QRZ (Basic login) and search for a specific station there, all info including the name is available.

So what happened? QRZ changed the data structure again?

I assume others see this as well. Is it being worked on?

 

73 de LA3PU

Svein

 

 


Re: QRZ Lookup

Rick Ellison
 

Are you using the XML interface??

I just received an email from qrz saying that the XML interface was going to be adding a couple of fields starting at midnight last night. I have not read the email yet so I’m not sure what changed but I bet it is associated with what they have changed..

 

73 Rick N2AMG

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Damian M0BKV via groups.io
Sent: Wednesday, July 15, 2020 10:15 AM
To: hamlogger@groups.io
Subject: Re: [hamlogger] QRZ Lookup

 

Same here. QRZ.com bug I believe


Virus-free. www.avast.com


Re: Logger32

Dave Colliau
 

You can control most anything that you can get the CI-V commands for now ?
Dave N8DC

On 07/15/2020 9:28 AM Tom Wylie <thomasgwylie@gmail.com> wrote:


Hi Bob

Are there any plans to introduce TCI - Transceiver Control Interface

into Logger 32 - anytime soon or anytime at all?

Tom
GM4FDM




Re: QRZ Lookup

Damian M0BKV
 

Same here. QRZ.com bug I believe


Re: QRZ Lookup

Steph, F5NZY
 

Don't worry John,

I've got the same thing here. Probably a small bug from QRZ.COM that will be quickly fixed, I'm sure.

73 de Steph, F5NZY

Le 15/07/2020 à 15:59, John a écrit :

After years of using Logger16 and logger32, I actually have a problem.

 

Starting this morning, the “ NAME “ no longer transfers from qrz.com.

 

Any ideas ??

 

John

WB9PNU

 

 


Virus-free. www.avg.com
-- 
Everything looks impossible to the people who never tried anything.
(Dr J-L Etienne)


QRZ Lookup

John
 

After years of using Logger16 and logger32, I actually have a problem.

 

Starting this morning, the “ NAME “ no longer transfers from qrz.com.

 

Any ideas ??

 

John

WB9PNU

 

 


Virus-free. www.avg.com


Logger32

Tom Wylie
 

Hi Bob

Are there any plans to introduce TCI - Transceiver Control Interface

into Logger 32 - anytime soon or anytime at all?

Tom
GM4FDM


Unanswered emails....

Rick Ellison
 

If any of the users of my software have sent me an email to either rellison@... or n2amg@... since January 1st 2020 and you did not get a reply, I more than likely did not get your email. Tonight my mail provider dumped over 5000 emails on me that I am not sure that I have read or not. I just deleted all of the new emails instead of going thru them. Please send your questions or issues to me again if you did not get a reply from me...

 

73 Rick N2AMG


Virus-free. www.avast.com


Scratchpad - geature request..

Vince Shirley
 

Probably the wrong time to ask for this with V4 on the horizon, however, I'll go for it anyway.

At the moment scratchpad shows QSO time.

I find it very useful for accumulating DX spots for my yearly needed entities list via the "Setup DX Spot Alert Menu".  A handy feature would be for the scratchpad to show the time of the DX spot, in order to eliminate those that have expired.

Just a thought...

Vince, drinking his way through the now semi-lockdown. the Rosebank (https://rosebank.com/) going down well...

2141 - 2160 of 82841