>> -----Original Message-----

>> From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf

>> Of Tom Wylie

>> Sent: Sunday, July 5, 2020 11:23 AM

>> To: hamlogger@groups.io

>> Subject: Re: [hamlogger] strange resut in v3.5 and in v4

>>

>> Which Christmas?  :o)

>>

>>

>>

>> Tom

>> GM4FDM

>>

>> On 05/07/2020 17:15, Jim Hargrave wrote:

>> > Mike,

>> >

>> > L32 ver 4.0 is in controlled Beta /Debug testing.

>> >

>> > Anticipate public release by Christmas.

>> >

>> > Jim – w5ifp-*//*

>> >

>> > *From:*hamlogger@groups.io [mailto:hamlogger@groups.io] *On

>> Behalf Of *Mike

>> > *Sent:* Sunday, July 5, 2020 10:37 AM

>> > *To:* hamlogger@groups.io

>> > *Subject:* Re: [hamlogger] strange resut in v3.5 and in v4

>> >

>> >  From where did you get L32 4.0?

>> > Mike

>> >

>> >

>>

>>

On 07/05/2020 12:23 PM Tom Wylie <thomasgwylie@gmail.com> wrote:


Which Christmas? :o)



Tom
GM4FDM

On 05/07/2020 17:15, Jim Hargrave wrote:

Mike,

L32 ver 4.0 is in controlled Beta /Debug testing.

Anticipate public release by Christmas.

Jim – w5ifp-*//*

*From:*hamlogger@groups.io [mailto:hamlogger@groups.io] *On Behalf Of *Mike
*Sent:* Sunday, July 5, 2020 10:37 AM
*To:* hamlogger@groups.io
*Subject:* Re: [hamlogger] strange resut in v3.5 and in v4

From where did you get L32 4.0?
Mike

If you operate CW only, then yes, remove all the other modes from the BandPlan (if nothing else it will make things go much faster without having to plough through all the garbage to get to CW at the bottom of the list. Also, if you use the Logger32 CW Machine, toy can click the "Mode from Sound Card/CW Machine" option. that way, when the CW Machine is open the radio mode defaults to CW. SeventyThree(s).

On 07/04/2020 11:16 AM Michael Buckle via groups.io <mikejohnb@...> wrote:

Mike,
L32 ver 4.0 is in controlled Beta /Debug testing.
Anticipate public release by Christmas.
Jim – w5ifp-*//*
*From:*hamlogger@groups.io [mailto:hamlogger@groups.io] *On Behalf Of *Mike
*Sent:* Sunday, July 5, 2020 10:37 AM
*To:* hamlogger@groups.io
*Subject:* Re: [hamlogger] strange resut in v3.5 and in v4
From where did you get L32 4.0?
Mike

From where did you get L32 4.0?
Mike

On 07/05/2020 10:36 AM John Caulfield <jcaulfield@...> wrote:

When I enter (try to) a new contact it will not populate the logbook.
I  started a new logbook and that worked and then I imported the old log files into the new logbook and the problem started again.  do I have some sort of corruption and how might I  fix it?
thanks
John KØFUZ

If you are sure it's just the highlight color you have lost (and not the actual W, C, and G status), then click SETUP | HIGHLIGHT| CONFIRMED HIGHLIGHT. SeventyThree(s).

On 07/05/2020 2:05 AM PETER DOUGHTY via groups.io <g3tkk=btinternet.com@groups.io> wrote:

Hello

I have been using the various DXCC award grids to map my stats with the
contacts shown as W C G as appropriate for decades.

For each I have had the background of the slots being red, yellow and
green as appropriate. Out of the blue I have lost the red background for
'confirmed' contacts though this is still in places such as IOTA logging
and across all the other windows show no change. Even on the DXCC grids
the worked and granted slot backgrounds are still in place.

Can anyone tell me how I did this and how I can get this back again?

73s

Peter G3TKK

On 07/05/2020 2:05 AM PETER DOUGHTY via groups.io <g3tkk=btinternet.com@groups.io> wrote:


Hello

I have been using the various DXCC award grids to map my stats with the
contacts shown as W C G as appropriate for decades.

For each I have had the background of the slots being red, yellow and
green as appropriate. Out of the blue I have lost the red background for
'confirmed' contacts though this is still in places such as IOTA logging
and across all the other windows show no change. Even on the DXCC grids
the worked and granted slot backgrounds are still in place.

Can anyone tell me how I did this and how I can get this back again?

73s

Peter G3TKK

On 07/04/2020 2:24 PM Michael Buckle via groups.io <mikejohnb@...> wrote:

Thanks Bob, I really appreciate your efforts on this subject, I will look into the CW Machine. I shut down the PC and restarted again, Bingo, CW is selected but only for a short time, then it reverts back to RTTY. Most frustrating. I will now check your suggestions, Thanks again.

On 04/07/2020 16:26, Bob wrote:

If you operate CW only, then yes, remove all the other modes from the BandPlan (if nothing else it will make things go much faster without having to plough through all the garbage to get to CW at the bottom of the list. Also, if you use the Logger32 CW Machine, toy can click the "Mode from Sound Card/CW Machine" option. that way, when the CW Machine is open the radio mode defaults to CW. SeventyThree(s).

On 07/04/2020 11:16 AM Michael Buckle via groups.io <mikejohnb@...> wrote:

Bob

I have checked the Mode on the input window and have posted another screen shot below.

I only use CW, I don't any other settings relating to RTTY or any other mode.

The strange part here is, this is identical to the mode on the input screen when the main Monitor window is selected and, when clicked, does not set to RTTY and sets as CW. I will try and see if there is anything I can do on the Radio settings. What would happen if I deselect all other modes or at least the RTTY mode???

On 04/07/2020 15:49, Bob wrote:

Do you have the Sound Card Data Window open (running RTTY maybe)? What option(s) have you selected to determine what mode to put your radio on (Click on the word MODE at the top/center of the Logbok Entry Window)? Looking at the Radio Debug Window is the mode command being sent from Logger32 correct (is the radio doing as it is told, or does it have a RTTY fetish)? SeventyThree(s). 

On 07/04/2020 10:29 AM Michael Buckle via groups.io <mikejohnb@...> wrote:

All, I have a small problem on 20m setup for Logger32 which appears to have just started.

Usage

• Logger32 V3.50.419 (Latest available update)
  
• Radio ICOM 7610
  

Now, when I look at the Monitor 20M band window and see a station I wish to work, I will click on that station and my radio QSYs to the Stations QRG, If however, it is the band for 20m and I click on 20.012 for a DX station, everything moves to that station but it changes the Mode to RTTY even though the station is clearly in the CW Area of the band. Now if I do exactly the same in the General Band Plan window (Left most Window in my Photo 1 attached), the radio again moves to 20m 14.012 but correctly changes to CW mode. Similarly, if I click on the scale graticule on the monitor, window, the Mode changes correctly.

Photo 1

Photo 2

This problem is very frustrating and I cant seem to set the band and mode for the 20m monitor to get the monitor to change to the CW end without the radio changing to RTTY. Any assistance on this issue would be appreciated.

Regards Mike G4RMV

On 07/04/2020 6:07 PM Ignacy Misztal <no9e@...> wrote:

I created a VSPE splitter for serial rotor ports to use them by multiple applications and remote. I tried port 16 and 32. Both work with rotor controls and n1mm but not logger32.
The message is:
Invalid port 32.
These ports do not show in device manager.
Ignacy NO9E

If you operate CW only, then yes, remove all the other modes from the BandPlan (if nothing else it will make things go much faster without having to plough through all the garbage to get to CW at the bottom of the list. Also, if you use the Logger32 CW Machine, toy can click the "Mode from Sound Card/CW Machine" option. that way, when the CW Machine is open the radio mode defaults to CW. SeventyThree(s).

On 07/04/2020 11:16 AM Michael Buckle via groups.io <mikejohnb@...> wrote:

Bob

I have checked the Mode on the input window and have posted another screen shot below.

I only use CW, I don't any other settings relating to RTTY or any other mode.

The strange part here is, this is identical to the mode on the input screen when the main Monitor window is selected and, when clicked, does not set to RTTY and sets as CW. I will try and see if there is anything I can do on the Radio settings. What would happen if I deselect all other modes or at least the RTTY mode???

On 04/07/2020 15:49, Bob wrote:

Do you have the Sound Card Data Window open (running RTTY maybe)? What option(s) have you selected to determine what mode to put your radio on (Click on the word MODE at the top/center of the Logbok Entry Window)? Looking at the Radio Debug Window is the mode command being sent from Logger32 correct (is the radio doing as it is told, or does it have a RTTY fetish)? SeventyThree(s). 

On 07/04/2020 10:29 AM Michael Buckle via groups.io <mikejohnb@...> wrote:

All, I have a small problem on 20m setup for Logger32 which appears to have just started.

Usage

• Logger32 V3.50.419 (Latest available update)
  
• Radio ICOM 7610
  

Now, when I look at the Monitor 20M band window and see a station I wish to work, I will click on that station and my radio QSYs to the Stations QRG, If however, it is the band for 20m and I click on 20.012 for a DX station, everything moves to that station but it changes the Mode to RTTY even though the station is clearly in the CW Area of the band. Now if I do exactly the same in the General Band Plan window (Left most Window in my Photo 1 attached), the radio again moves to 20m 14.012 but correctly changes to CW mode. Similarly, if I click on the scale graticule on the monitor, window, the Mode changes correctly.

Photo 1

Photo 2

This problem is very frustrating and I cant seem to set the band and mode for the 20m monitor to get the monitor to change to the CW end without the radio changing to RTTY. Any assistance on this issue would be appreciated.

Regards Mike G4RMV

On 07/04/2020 11:16 AM Michael Buckle via groups.io <mikejohnb@...> wrote:

Bob

I have checked the Mode on the input window and have posted another screen shot below.

I only use CW, I don't any other settings relating to RTTY or any other mode.

The strange part here is, this is identical to the mode on the input screen when the main Monitor window is selected and, when clicked, does not set to RTTY and sets as CW. I will try and see if there is anything I can do on the Radio settings. What would happen if I deselect all other modes or at least the RTTY mode???

On 04/07/2020 15:49, Bob wrote:

Do you have the Sound Card Data Window open (running RTTY maybe)? What option(s) have you selected to determine what mode to put your radio on (Click on the word MODE at the top/center of the Logbok Entry Window)? Looking at the Radio Debug Window is the mode command being sent from Logger32 correct (is the radio doing as it is told, or does it have a RTTY fetish)? SeventyThree(s). 

On 07/04/2020 10:29 AM Michael Buckle via groups.io <mikejohnb@...> wrote:

All, I have a small problem on 20m setup for Logger32 which appears to have just started.

Usage

• Logger32 V3.50.419 (Latest available update)
  
• Radio ICOM 7610
  

Now, when I look at the Monitor 20M band window and see a station I wish to work, I will click on that station and my radio QSYs to the Stations QRG, If however, it is the band for 20m and I click on 20.012 for a DX station, everything moves to that station but it changes the Mode to RTTY even though the station is clearly in the CW Area of the band. Now if I do exactly the same in the General Band Plan window (Left most Window in my Photo 1 attached), the radio again moves to 20m 14.012 but correctly changes to CW mode. Similarly, if I click on the scale graticule on the monitor, window, the Mode changes correctly.

Photo 1

Photo 2

This problem is very frustrating and I cant seem to set the band and mode for the 20m monitor to get the monitor to change to the CW end without the radio changing to RTTY. Any assistance on this issue would be appreciated.

Regards Mike G4RMV

Do you have the Sound Card Data Window open (running RTTY maybe)? What option(s) have you selected to determine what mode to put your radio on (Click on the word MODE at the top/center of the Logbok Entry Window)? Looking at the Radio Debug Window is the mode command being sent from Logger32 correct (is the radio doing as it is told, or does it have a RTTY fetish)? SeventyThree(s). 

On 07/04/2020 10:29 AM Michael Buckle via groups.io <mikejohnb@...> wrote:

All, I have a small problem on 20m setup for Logger32 which appears to have just started.

Usage

• Logger32 V3.50.419 (Latest available update)
  
• Radio ICOM 7610
  

Now, when I look at the Monitor 20M band window and see a station I wish to work, I will click on that station and my radio QSYs to the Stations QRG, If however, it is the band for 20m and I click on 20.012 for a DX station, everything moves to that station but it changes the Mode to RTTY even though the station is clearly in the CW Area of the band. Now if I do exactly the same in the General Band Plan window (Left most Window in my Photo 1 attached), the radio again moves to 20m 14.012 but correctly changes to CW mode. Similarly, if I click on the scale graticule on the monitor, window, the Mode changes correctly.

Photo 1

Photo 2

This problem is very frustrating and I cant seem to set the band and mode for the 20m monitor to get the monitor to change to the CW end without the radio changing to RTTY. Any assistance on this issue would be appreciated.

Regards Mike G4RMV

On 07/04/2020 10:29 AM Michael Buckle via groups.io <mikejohnb@...> wrote:

All, I have a small problem on 20m setup for Logger32 which appears to have just started.

Usage

• Logger32 V3.50.419 (Latest available update)
  
• Radio ICOM 7610
  

Now, when I look at the Monitor 20M band window and see a station I wish to work, I will click on that station and my radio QSYs to the Stations QRG, If however, it is the band for 20m and I click on 20.012 for a DX station, everything moves to that station but it changes the Mode to RTTY even though the station is clearly in the CW Area of the band. Now if I do exactly the same in the General Band Plan window (Left most Window in my Photo 1 attached), the radio again moves to 20m 14.012 but correctly changes to CW mode. Similarly, if I click on the scale graticule on the monitor, window, the Mode changes correctly.

Photo 1

Photo 2

This problem is very frustrating and I cant seem to set the band and mode for the 20m monitor to get the monitor to change to the CW end without the radio changing to RTTY. Any assistance on this issue would be appreciated.

Regards Mike G4RMV