1. hamlogger@groups.io
   Date   
Re: 7610

John Munton - G7SSE
 

Dave

I have sent you a direct email with some pictures of my settings.

73
John - G7SSE

------ Original Message ------
From: "Dave Colliau" <n8dc-8@...>
Sent: 12/06/2020 15:10:03
Subject: [hamlogger] 7610

Its been a while since I had 2 Icom 7610's but a friend just bought one and we are trying to set it up for rig control and digital from within Logger 32. If I remember right we should be able to use the lower numbered port for the rig control and then the higher number port would be the port used to run FSK via MMTTY. ?  There is no way I can get the 2nd higher number port to work . If someone has all this working I would very much like some info on rig and Logger32 settings . Maybe some screen shots.
Thanks in advance for any info
Dave N8DC


--
73, John - G7SSE
Re: InonoProbe W10 Help

Michael Harris
 

The crippled version will continue to work but with some data gaps. I use it to populate solar data into Ham Cap.

Regards,

Mike VP8NO

On 08/06/2020 19:44, Rick Williams - VE7TK via groups.io wrote:
Alex announced a month or so ago that Ionprobe has been discontinued. I believe the reason was difficulty in getting the necessary data.
73, Rick
VE7TK
7610

Dave Colliau
 

Its been a while since I had 2 Icom 7610's but a friend just bought one and we are trying to set it up for rig control and digital from within Logger 32. If I remember right we should be able to use the lower numbered port for the rig control and then the higher number port would be the port used to run FSK via MMTTY. ?  There is no way I can get the 2nd higher number port to work . If someone has all this working I would very much like some info on rig and Logger32 settings . Maybe some screen shots.
Thanks in advance for any info
Dave N8DC

Re: Logger32 error

Bob
 

Mario, are you sure this picture is from Logger32 version 3.50.418? This looks like a message from an older version of Logger32. 73.

On June 12, 2020 at 8:19 AM "Mario, IZ8DBJ" <iz8dbj@...> wrote:

Bob, here the photo is.
Mario, IZ8DBJ 
 

Il giorno ven 12 giu 2020 alle 11:57 Bob < k4cy@...> ha scritto:
Do you still se the problem? A picture please. 73.
On June 12, 2020 at 5:40 AM "Mario, IZ8DBJ" < iz8dbj@...> wrote:

Ciao Bob and all,
Yes, just use the latest version of logger32.
73 de Mario, IZ8DBJ 

Il giorno gio 11 giu 2020 alle 19:21 Bob < k4cy@...> ha scritto:
Mario, did you try Logger32 version 3.50.418? SeventyThree(s).
On June 11, 2020 at 3:11 AM "Mario, IZ8DBJ" < iz8dbj@...> wrote:

Hello to all,
Does nobody have idea of as resolving it? I have followed the councils that Bob has given to me, but unfortunately the continuous problem to return the use of Logger32  difficult.
73 Mario, IZ8DBJ 

Il giorno sab 6 giu 2020 alle 11:31 Mario, IZ8DBJ via groups.io <iz8dbj= gmail.com@groups.io> ha scritto:
Hello Bob,
Thanks for reply, but unfortunately the problem has not been resolved, the error appears continuously while launching logger32 and L32lookups in as administrator.
The operating system is win10Pro and 8Gb of Ram.
73 Mario, IZ8DBJ 

Il giorno gio 4 giu 2020 alle 08:42 F4FQH Olivier < unit365@...> ha scritto:
Ciao Bob
 
Tried l32loockups in admin and same issue.
Work started again a bit so not get the time to check more on this...
 
Thanks for all your work as usuall.
 
73s
F4FQH
Olivier
 
 
From: Bob
Sent: Wednesday, June 3, 2020 11:20 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 error
 
Maybe one more suggestion ... The error message is reported when Logger32 sends a message to the QRZ Lookup Window to close (like after a QSO is logged, of when the Logbook Entry Window is cleared) and the message fails. If you have Logger32 set to 'Run as Administrator', make sure the L32Lookups software from N2AMG is also set to 'Run as Administrator'. 73.
On June 3, 2020 at 4:33 PM Mario Pesce < iz8dbj@...> wrote:

Hi Bob,
Thanks for the reply.Unfortunately the enable uso broadcast of dx spots is already deselected.
Any other ideas?
73 Mario, IZ8DBJ 
 
Il giorno mer 3 giu 2020 alle 19:04 Bob < k4cy@...> ha scritto:
Right click on the DX Spot Window. UNcheck the option ENABLE UDP BROADCAST OF DX SPOTS. SeventyThree(s).
On June 3, 2020 at 12:27 PM Mario Pesce < iz8dbj@...> wrote:

Hi to all,
well resentful, I have a problem with Logger32, Frequently get the error (attached photo) which blocks the flow of data from the cluster and also logger32. Can you help me please?
73 de Mario, IZ8DBJ 
 

 
 


 


 


 

 

 

 

 

 


 

 

 


 
 

 

 


 

Re: Logger32 error

Mario, IZ8DBJ
 

Bob, here the photo is.
Mario, IZ8DBJ 

Il giorno ven 12 giu 2020 alle 11:57 Bob <k4cy@...> ha scritto:
Do you still se the problem? A picture please. 73.
On June 12, 2020 at 5:40 AM "Mario, IZ8DBJ" <iz8dbj@...> wrote:

Ciao Bob and all,
Yes, just use the latest version of logger32.
73 de Mario, IZ8DBJ 

Il giorno gio 11 giu 2020 alle 19:21 Bob < k4cy@...> ha scritto:
Mario, did you try Logger32 version 3.50.418? SeventyThree(s).
On June 11, 2020 at 3:11 AM "Mario, IZ8DBJ" < iz8dbj@...> wrote:

Hello to all,
Does nobody have idea of as resolving it? I have followed the councils that Bob has given to me, but unfortunately the continuous problem to return the use of Logger32  difficult.
73 Mario, IZ8DBJ 

Il giorno sab 6 giu 2020 alle 11:31 Mario, IZ8DBJ via groups.io <iz8dbj= gmail.com@groups.io> ha scritto:
Hello Bob,
Thanks for reply, but unfortunately the problem has not been resolved, the error appears continuously while launching logger32 and L32lookups in as administrator.
The operating system is win10Pro and 8Gb of Ram.
73 Mario, IZ8DBJ 

Il giorno gio 4 giu 2020 alle 08:42 F4FQH Olivier < unit365@...> ha scritto:
Ciao Bob
 
Tried l32loockups in admin and same issue.
Work started again a bit so not get the time to check more on this...
 
Thanks for all your work as usuall.
 
73s
F4FQH
Olivier
 
 
From: Bob
Sent: Wednesday, June 3, 2020 11:20 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 error
 
Maybe one more suggestion ... The error message is reported when Logger32 sends a message to the QRZ Lookup Window to close (like after a QSO is logged, of when the Logbook Entry Window is cleared) and the message fails. If you have Logger32 set to 'Run as Administrator', make sure the L32Lookups software from N2AMG is also set to 'Run as Administrator'. 73.
On June 3, 2020 at 4:33 PM Mario Pesce < iz8dbj@...> wrote:

Hi Bob,
Thanks for the reply.Unfortunately the enable uso broadcast of dx spots is already deselected.
Any other ideas?
73 Mario, IZ8DBJ 
 
Il giorno mer 3 giu 2020 alle 19:04 Bob < k4cy@...> ha scritto:
Right click on the DX Spot Window. UNcheck the option ENABLE UDP BROADCAST OF DX SPOTS. SeventyThree(s).
On June 3, 2020 at 12:27 PM Mario Pesce < iz8dbj@...> wrote:

Hi to all,
well resentful, I have a problem with Logger32, Frequently get the error (attached photo) which blocks the flow of data from the cluster and also logger32. Can you help me please?
73 de Mario, IZ8DBJ 
 

 
 


 


 


 

 

 

 

 

 


 

 

 


 

FT8 Report Duplicates

HI3B Radhames
 

Why the report appear duplicates in the comments column?
If there is a function activated, I would appreciate any information
or suggestions to deactivate it.
Thanks in advance.
Radhames (Rada)
HI3B
Re: Logger32 error

Bob
 

Do you still se the problem? A picture please. 73.

On June 12, 2020 at 5:40 AM "Mario, IZ8DBJ" <iz8dbj@...> wrote:

Ciao Bob and all,
Yes, just use the latest version of logger32.
73 de Mario, IZ8DBJ 

Il giorno gio 11 giu 2020 alle 19:21 Bob < k4cy@...> ha scritto:
Mario, did you try Logger32 version 3.50.418? SeventyThree(s).
On June 11, 2020 at 3:11 AM "Mario, IZ8DBJ" < iz8dbj@...> wrote:

Hello to all,
Does nobody have idea of as resolving it? I have followed the councils that Bob has given to me, but unfortunately the continuous problem to return the use of Logger32  difficult.
73 Mario, IZ8DBJ 

Il giorno sab 6 giu 2020 alle 11:31 Mario, IZ8DBJ via groups.io <iz8dbj= gmail.com@groups.io> ha scritto:
Hello Bob,
Thanks for reply, but unfortunately the problem has not been resolved, the error appears continuously while launching logger32 and L32lookups in as administrator.
The operating system is win10Pro and 8Gb of Ram.
73 Mario, IZ8DBJ 

Il giorno gio 4 giu 2020 alle 08:42 F4FQH Olivier < unit365@...> ha scritto:
Ciao Bob
 
Tried l32loockups in admin and same issue.
Work started again a bit so not get the time to check more on this...
 
Thanks for all your work as usuall.
 
73s
F4FQH
Olivier
 
 
From: Bob
Sent: Wednesday, June 3, 2020 11:20 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 error
 
Maybe one more suggestion ... The error message is reported when Logger32 sends a message to the QRZ Lookup Window to close (like after a QSO is logged, of when the Logbook Entry Window is cleared) and the message fails. If you have Logger32 set to 'Run as Administrator', make sure the L32Lookups software from N2AMG is also set to 'Run as Administrator'. 73.
On June 3, 2020 at 4:33 PM Mario Pesce < iz8dbj@...> wrote:

Hi Bob,
Thanks for the reply.Unfortunately the enable uso broadcast of dx spots is already deselected.
Any other ideas?
73 Mario, IZ8DBJ 
 
Il giorno mer 3 giu 2020 alle 19:04 Bob < k4cy@...> ha scritto:
Right click on the DX Spot Window. UNcheck the option ENABLE UDP BROADCAST OF DX SPOTS. SeventyThree(s).
On June 3, 2020 at 12:27 PM Mario Pesce < iz8dbj@...> wrote:

Hi to all,
well resentful, I have a problem with Logger32, Frequently get the error (attached photo) which blocks the flow of data from the cluster and also logger32. Can you help me please?
73 de Mario, IZ8DBJ 
 

 
 


 


 


 

 

 

 

 

 


 

 

 


 

Re: Logger32 error

Mario, IZ8DBJ
 

Ciao Bob and all,
Yes, just use the latest version of logger32.
73 de Mario, IZ8DBJ 

Il giorno gio 11 giu 2020 alle 19:21 Bob <k4cy@...> ha scritto:
Mario, did you try Logger32 version 3.50.418? SeventyThree(s).
On June 11, 2020 at 3:11 AM "Mario, IZ8DBJ" <iz8dbj@...> wrote:

Hello to all,
Does nobody have idea of as resolving it? I have followed the councils that Bob has given to me, but unfortunately the continuous problem to return the use of Logger32  difficult.
73 Mario, IZ8DBJ 

Il giorno sab 6 giu 2020 alle 11:31 Mario, IZ8DBJ via groups.io <iz8dbj= gmail.com@groups.io> ha scritto:
Hello Bob,
Thanks for reply, but unfortunately the problem has not been resolved, the error appears continuously while launching logger32 and L32lookups in as administrator.
The operating system is win10Pro and 8Gb of Ram.
73 Mario, IZ8DBJ 

Il giorno gio 4 giu 2020 alle 08:42 F4FQH Olivier < unit365@...> ha scritto:
Ciao Bob
 
Tried l32loockups in admin and same issue.
Work started again a bit so not get the time to check more on this...
 
Thanks for all your work as usuall.
 
73s
F4FQH
Olivier
 
 
From: Bob
Sent: Wednesday, June 3, 2020 11:20 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 error
 
Maybe one more suggestion ... The error message is reported when Logger32 sends a message to the QRZ Lookup Window to close (like after a QSO is logged, of when the Logbook Entry Window is cleared) and the message fails. If you have Logger32 set to 'Run as Administrator', make sure the L32Lookups software from N2AMG is also set to 'Run as Administrator'. 73.
On June 3, 2020 at 4:33 PM Mario Pesce < iz8dbj@...> wrote:

Hi Bob,
Thanks for the reply.Unfortunately the enable uso broadcast of dx spots is already deselected.
Any other ideas?
73 Mario, IZ8DBJ 
 
Il giorno mer 3 giu 2020 alle 19:04 Bob < k4cy@...> ha scritto:
Right click on the DX Spot Window. UNcheck the option ENABLE UDP BROADCAST OF DX SPOTS. SeventyThree(s).
On June 3, 2020 at 12:27 PM Mario Pesce < iz8dbj@...> wrote:

Hi to all,
well resentful, I have a problem with Logger32, Frequently get the error (attached photo) which blocks the flow of data from the cluster and also logger32. Can you help me please?
73 de Mario, IZ8DBJ 
 

 
 


 


 


 

 

 

 

 

 


 

Re: Any word from the ARRL yet?

Dave Colliau
 

Well now that you put it that way ummm No !
Dave N8DC

--
Sent from Yahoo Email App for Android

Thursday, 11 June 2020, 09:46PM -04:00 from Bob k4cy@...:

Dave, just trying to be proactive. There's a lot of logging programs out there. When Antifa officially takes control, and the UN/IARU/ARRL give their blessing, don't you want to be the first on the block to get credit for a 'New one'? SeventyThree(s).
On June 11, 2020 at 9:29 PM Dave Colliau <n8dc-8@...> wrote:

Bob. Whatever it is your on have the doctors adjust the dosage . I am worried for you .
Dave N8DC

--
Sent from Yahoo Email App for Android

Thursday, 11 June 2020, 09:26PM -04:00 from Bob k4cy@...:

Inquiring minds want to know? When will Washington State (top left corner of the USA) qualify for 'New Country' status?  I have made the necessary changes to Logger32, and pending IARU and ARRL blessing, we're a heartbeat away from a new one. Let me know, and an auto-update is a mouse click away ... For the USA-CA chasers, so sad, you just lost 39 ... This is more fun than trying to put frogs in a box ... SeventyThree(s)AndBackToNetOverOver.



 

Re: Any word from the ARRL yet?

Bob
 

Dave, just trying to be proactive. There's a lot of logging programs out there. When Antifa officially takes control, and the UN/IARU/ARRL give their blessing, don't you want to be the first on the block to get credit for a 'New one'? SeventyThree(s).

On June 11, 2020 at 9:29 PM Dave Colliau <n8dc-8@...> wrote:

Bob. Whatever it is your on have the doctors adjust the dosage . I am worried for you .
Dave N8DC

--
Sent from Yahoo Email App for Android

Thursday, 11 June 2020, 09:26PM -04:00 from Bob k4cy@...:

Inquiring minds want to know? When will Washington State (top left corner of the USA) qualify for 'New Country' status?  I have made the necessary changes to Logger32, and pending IARU and ARRL blessing, we're a heartbeat away from a new one. Let me know, and an auto-update is a mouse click away ... For the USA-CA chasers, so sad, you just lost 39 ... This is more fun than trying to put frogs in a box ... SeventyThree(s)AndBackToNetOverOver.



 

Re: Any word from the ARRL yet?

Dave Colliau
 

Bob. Whatever it is your on have the doctors adjust the dosage . I am worried for you .
Dave N8DC

--
Sent from Yahoo Email App for Android

Thursday, 11 June 2020, 09:26PM -04:00 from Bob k4cy@...:

Inquiring minds want to know? When will Washington State (top left corner of the USA) qualify for 'New Country' status?  I have made the necessary changes to Logger32, and pending IARU and ARRL blessing, we're a heartbeat away from a new one. Let me know, and an auto-update is a mouse click away ... For the USA-CA chasers, so sad, you just lost 39 ... This is more fun than trying to put frogs in a box ... SeventyThree(s)AndBackToNetOverOver.


Any word from the ARRL yet?

Bob
 

Inquiring minds want to know? When will Washington State (top left corner of the USA) qualify for 'New Country' status?  I have made the necessary changes to Logger32, and pending IARU and ARRL blessing, we're a heartbeat away from a new one. Let me know, and an auto-update is a mouse click away ... For the USA-CA chasers, so sad, you just lost 39 ... This is more fun than trying to put frogs in a box ... SeventyThree(s)AndBackToNetOverOver.


Re: Logger32 error

Bob
 

Mario, did you try Logger32 version 3.50.418? SeventyThree(s).

On June 11, 2020 at 3:11 AM "Mario, IZ8DBJ" <iz8dbj@...> wrote:

Hello to all,
Does nobody have idea of as resolving it? I have followed the councils that Bob has given to me, but unfortunately the continuous problem to return the use of Logger32  difficult.
73 Mario, IZ8DBJ 

Il giorno sab 6 giu 2020 alle 11:31 Mario, IZ8DBJ via groups.io <iz8dbj= gmail.com@groups.io> ha scritto:
Hello Bob,
Thanks for reply, but unfortunately the problem has not been resolved, the error appears continuously while launching logger32 and L32lookups in as administrator.
The operating system is win10Pro and 8Gb of Ram.
73 Mario, IZ8DBJ 

Il giorno gio 4 giu 2020 alle 08:42 F4FQH Olivier < unit365@...> ha scritto:
Ciao Bob
 
Tried l32loockups in admin and same issue.
Work started again a bit so not get the time to check more on this...
 
Thanks for all your work as usuall.
 
73s
F4FQH
Olivier
 
 
From: Bob
Sent: Wednesday, June 3, 2020 11:20 PM
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 error
 
Maybe one more suggestion ... The error message is reported when Logger32 sends a message to the QRZ Lookup Window to close (like after a QSO is logged, of when the Logbook Entry Window is cleared) and the message fails. If you have Logger32 set to 'Run as Administrator', make sure the L32Lookups software from N2AMG is also set to 'Run as Administrator'. 73.
On June 3, 2020 at 4:33 PM Mario Pesce < iz8dbj@...> wrote:

Hi Bob,
Thanks for the reply.Unfortunately the enable uso broadcast of dx spots is already deselected.
Any other ideas?
73 Mario, IZ8DBJ 
 
Il giorno mer 3 giu 2020 alle 19:04 Bob < k4cy@...> ha scritto:
Right click on the DX Spot Window. UNcheck the option ENABLE UDP BROADCAST OF DX SPOTS. SeventyThree(s).
On June 3, 2020 at 12:27 PM Mario Pesce < iz8dbj@...> wrote:

Hi to all,
well resentful, I have a problem with Logger32, Frequently get the error (attached photo) which blocks the flow of data from the cluster and also logger32. Can you help me please?
73 de Mario, IZ8DBJ 
 

 
 


 


 


 

 

 

 

 

 


 

Re: Bandmap missing FT8

Bob
 

Ha! I think you'll enjoy it on this reflector. SeventyThree(s).

PS. the following is an extract from the groups.io intro to this reflector ... However, there is always the risk of being castigated and publicly flogged on this reflector, it adds to the challenge, and (hopefully) encourages people to try to figure out things for themselves ...

On June 11, 2020 at 10:37 AM Marty W0EET <mhtmr10@...> wrote:

Bob and Vince,
Thanks for your detailed yet inappropriate and unnecessarily condescending responses. The problem was I, as a first time Telnet user, assumed VE7CC was streaming spots based on my filter settings and didn't look carefully enough at the content detail. In reality, they filter out FT8 spots by default. If you're seeing FT8 spots you must have turned it on via command line as described at VE7CC. So when I wasn't seeing FT8 spots in L32 I assumed there was a problem with the filtering in the DX Spotting. My bad. 

And one final point if I may. I'm a casual FT8 user, almost exclusively on 6m. I agree it's "mindless" but with a compromise antenna during the sunspot minimum it's better than nothing. I've been licensed since the mid '60s, have 324 countries confirmed, have built numerous QRP transceivers and antenna systems, tens of thousands of CW contacts operating from 3 countries, been coding since Basic, a BSEE. SO BUGGER OFF.

SeventyThree(s) 

 

Re: UDP Auto flagging for upload to LOTW?

Chuck Kraly K0XM
 

AHHHHH I KNEW I was missing something. Thank you Everyone. I got it now....all is well in Missouri, 
Re: UDP Auto flagging for upload to LOTW?

Vilhjalmur Sigurjonsson
 

No, you are clicking on wrong window, it is the logbook entry window you should click.

73 Villi
TF3VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Chuck Kraly K0XM
Sent: fimmtudagur, 11. júní 2020 15:08
To: hamlogger@groups.io
Subject: Re: [hamlogger] UDP Auto flagging for upload to LOTW?

 

I agree Villi, but here is what I get when I right click
Re: UDP Auto flagging for upload to LOTW?

Chuck Kraly K0XM
 

I agree Villi, but here is what I get when I right click
Re: Bandmap missing FT8

Marty W0EET
 

Bob and Vince,
Thanks for your detailed yet inappropriate and unnecessarily condescending responses. The problem was I, as a first time Telnet user, assumed VE7CC was streaming spots based on my filter settings and didn't look carefully enough at the content detail. In reality, they filter out FT8 spots by default. If you're seeing FT8 spots you must have turned it on via command line as described at VE7CC. So when I wasn't seeing FT8 spots in L32 I assumed there was a problem with the filtering in the DX Spotting. My bad. 

And one final point if I may. I'm a casual FT8 user, almost exclusively on 6m. I agree it's "mindless" but with a compromise antenna during the sunspot minimum it's better than nothing. I've been licensed since the mid '60s, have 324 countries confirmed, have built numerous QRP transceivers and antenna systems, tens of thousands of CW contacts operating from 3 countries, been coding since Basic, a BSEE. SO BUGGER OFF.

SeventyThree(s) 
Re: UDP Auto flagging for upload to LOTW?

Vilhjalmur Sigurjonsson
 

The menu route is:

Right click on the log entry window, then Setup | QSLing and QSO export | Flag new QSO for LOTW

73 Villi  
TF3VS

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Chuck Kraly K0XM
Sent: fimmtudagur, 11. júní 2020 10:20
To: hamlogger@groups.io
Subject: [hamlogger] UDP Auto flagging for upload to LOTW?

 

Ok I KNOW I must be missing something simple, but I am using either JTALert/JTDX or MSHV with UDP to Logger32. The QSO is added fine, BUT like yesterday on 6mtrs, I had to manually flag 65 qsos for LOTW upload. Is there a way for UDP packets to automagically be flagged on import? I looked through the messages here and I cannot see any of the options listed. Running the latest 3.50.418
Chuck K0XM

Re: UDP Auto flagging for upload to LOTW?

ja1nlx
 

Chuck

When you import adi file you see this table and options.

73



On 2020/06/11 19:20, Chuck Kraly K0XM wrote:
Ok I KNOW I must be missing something simple, but I am using either JTALert/JTDX or MSHV with UDP to Logger32. The QSO is added fine, BUT like yesterday on 6mtrs, I had to manually flag 65 qsos for LOTW upload. Is there a way for UDP packets to automagically be flagged on import? I looked through the messages here and I cannot see any of the options listed. Running the latest 3.50.418
Chuck K0XM
--
73 de aki
JA1NLX
1581 - 1600 of 82032  
More
Home Messages Hashtags About Features Pricing Updates Terms Help Twitter