|
John,
Are these the same settings found in the latest help file?
Chuck K0XM
|
|
|
Glen
Thank you.
Sent from my U.S.Cellular© Smartphone
-------- Original message -------- From: John Munton - G7SSE <johng7sse@...> Date: 6/12/20 1:31 PM (GMT-06:00) To: hamlogger@groups.io Subject: Re: [hamlogger] 7610
Mail sent Glen.
Hope it's of some use.
73, John - G7SSE
------ Original Message ------
Sent: 12/06/2020 19:07:12
Subject: Re: [hamlogger] 7610
John, Might I have a copy of your settings as well? Thank you. 73 Glen K0JGH email: kesselring73@... Sent from Mail for Windows 10 I have sent you a direct email with some pictures of my settings. ------ Original Message ------ Sent: 12/06/2020 15:10:03 Subject: [hamlogger] 7610 Its been a while since I had 2 Icom 7610's but a friend just bought one and we are trying to set it up for rig control and digital from within Logger 32. If I remember right we should be able to use the lower numbered port for the rig control and then the higher number port would be the port used to run FSK via MMTTY. ? There is no way I can get the 2nd higher number port to work . If someone has all this working I would very much like some info on rig and Logger32 settings . Maybe some screen shots. Thanks in advance for any info
--
73, John - G7SSE
|
|
|
John Munton - G7SSE
Mail sent Glen.
Hope it's of some use.
73, John - G7SSE
------ Original Message ------
Sent: 12/06/2020 19:07:12
Subject: Re: [hamlogger] 7610
John, Might I have a copy of your settings as well? Thank you. 73 Glen K0JGH email: kesselring73@... Sent from Mail for Windows 10 I have sent you a direct email with some pictures of my settings. ------ Original Message ------ Sent: 12/06/2020 15:10:03 Subject: [hamlogger] 7610 Its been a while since I had 2 Icom 7610's but a friend just bought one and we are trying to set it up for rig control and digital from within Logger 32. If I remember right we should be able to use the lower numbered port for the rig control and then the higher number port would be the port used to run FSK via MMTTY. ? There is no way I can get the 2nd higher number port to work . If someone has all this working I would very much like some info on rig and Logger32 settings . Maybe some screen shots. Thanks in advance for any info
--
73, John - G7SSE
-- 73, John - G7SSE
|
|
|
Glen
Thanks
Sent from my U.S.Cellular© Smartphone
-------- Original message -------- From: John Munton - G7SSE <johng7sse@...> Date: 6/12/20 12:40 PM (GMT-06:00) To: hamlogger@groups.io Subject: Re: [hamlogger] 7610
Dave
I have sent you a direct email with some pictures of my settings.
73 John - G7SSE
------ Original Message ------
Sent: 12/06/2020 15:10:03
Subject: [hamlogger] 7610
Its been a while since I had 2 Icom 7610's but a friend just bought one and we are trying to set it up for rig control and digital from within Logger 32. If I remember right we should be able to use the lower numbered port for the rig control and then the higher number port would be the port used to run FSK via MMTTY. ? There is no way I can get the 2nd higher number port to work . If someone has all this working I would very much like some info on rig and Logger32 settings . Maybe some screen shots.
Thanks in advance for any info
Dave N8DC
|
|
|
Glen
John, Might I have a copy of your settings as well? Thank you. 73 Glen K0JGH email: kesselring73@... Sent from Mail for Windows 10
From: John Munton - G7SSESent: Friday, June 12, 2020 12:40 PM To: hamlogger@groups.ioSubject: Re: [hamlogger] 7610 I have sent you a direct email with some pictures of my settings. ------ Original Message ------ Sent: 12/06/2020 15:10:03 Subject: [hamlogger] 7610 Its been a while since I had 2 Icom 7610's but a friend just bought one and we are trying to set it up for rig control and digital from within Logger 32. If I remember right we should be able to use the lower numbered port for the rig control and then the higher number port would be the port used to run FSK via MMTTY. ? There is no way I can get the 2nd higher number port to work . If someone has all this working I would very much like some info on rig and Logger32 settings . Maybe some screen shots. Thanks in advance for any info
--
73, John - G7SSE
|
|
|
John Munton - G7SSE
Dave
I have sent you a direct email with some pictures of my settings.
73 John - G7SSE
------ Original Message ------
Sent: 12/06/2020 15:10:03
Subject: [hamlogger] 7610
Its been a while since I had 2 Icom 7610's but a friend just bought one and we are trying to set it up for rig control and digital from within Logger 32. If I remember right we should be able to use the lower numbered port for the rig control and then the higher number port would be the port used to run FSK via MMTTY. ? There is no way I can get the 2nd higher number port to work . If someone has all this working I would very much like some info on rig and Logger32 settings . Maybe some screen shots.
Thanks in advance for any info
Dave N8DC
-- 73, John - G7SSE
|
|
|
The crippled version will continue to work but with some data gaps. I use it to populate solar data into Ham Cap.
Regards,
Mike VP8NO
toggle quoted messageShow quoted text
On 08/06/2020 19:44, Rick Williams - VE7TK via groups.io wrote: Alex announced a month or so ago that Ionprobe has been discontinued. I believe the reason was difficulty in getting the necessary data.
73, Rick
VE7TK
|
|
|
Its been a while since I had 2 Icom 7610's but a friend just bought one and we are trying to set it up for rig control and digital from within Logger 32. If I remember right we should be able to use the lower numbered port for the rig control and then the higher number port would be the port used to run FSK via MMTTY. ? There is no way I can get the 2nd higher number port to work . If someone has all this working I would very much like some info on rig and Logger32 settings . Maybe some screen shots.
Thanks in advance for any info
Dave N8DC
|
|
|
Mario, are you sure this picture is from Logger32 version 3.50.418? This looks like a message from an older version of Logger32. 73.
On June 12, 2020 at 8:19 AM "Mario, IZ8DBJ" <iz8dbj@...> wrote:
Mario, IZ8DBJ
Il giorno ven 12 giu 2020 alle 11:57 Bob <
k4cy@...> ha scritto:
Do you still se the problem? A picture please. 73.
On June 12, 2020 at 5:40 AM "Mario, IZ8DBJ" <
iz8dbj@...> wrote:
Yes, just use the latest version of logger32.
73 de Mario, IZ8DBJ
Il giorno gio 11 giu 2020 alle 19:21 Bob <
k4cy@...> ha scritto:
Mario, did you try Logger32 version 3.50.418? SeventyThree(s).
On June 11, 2020 at 3:11 AM "Mario, IZ8DBJ" <
iz8dbj@...> wrote:
Does nobody have idea of as resolving it? I have followed the councils that Bob has given to me, but unfortunately the continuous problem to return the use of Logger32 difficult.
73 Mario, IZ8DBJ
Thanks for reply, but unfortunately the problem has not been resolved, the error appears continuously while launching logger32 and L32lookups in as administrator.
The operating system is win10Pro and 8Gb of Ram.
73 Mario, IZ8DBJ
Il giorno gio 4 giu 2020 alle 08:42 F4FQH Olivier <
unit365@...> ha scritto:
Ciao Bob
Tried l32loockups in admin and same issue.
Work started again a bit so not get the time to check more on this...
Thanks for all your work as usuall.
73s
F4FQH
Olivier
From:
Bob
Sent: Wednesday, June 3, 2020 11:20 PM
To:
hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 error
Maybe one more suggestion ... The error message is reported when Logger32 sends a message to the QRZ Lookup Window to close (like after a QSO is logged, of when the Logbook Entry Window is cleared) and the message fails. If you have Logger32 set to 'Run as Administrator', make sure the L32Lookups software from N2AMG is also set to 'Run as Administrator'. 73.
On June 3, 2020 at 4:33 PM Mario Pesce <
iz8dbj@...> wrote:
Hi Bob,
Thanks for the reply.Unfortunately the enable uso broadcast of dx spots is already deselected.
Any other ideas?
73 Mario, IZ8DBJ
Il giorno mer 3 giu 2020 alle 19:04 Bob <
k4cy@...> ha scritto:
Right click on the DX Spot Window. UNcheck the option ENABLE UDP BROADCAST OF DX SPOTS. SeventyThree(s).
On June 3, 2020 at 12:27 PM Mario Pesce <
iz8dbj@...> wrote:
Hi to all,
well resentful, I have a problem with Logger32, Frequently get the error (attached photo) which blocks the flow of data from the cluster and also logger32. Can you help me please?
|
|
|
toggle quoted messageShow quoted text
Il giorno ven 12 giu 2020 alle 11:57 Bob < k4cy@...> ha scritto:
Do you still se the problem? A picture please. 73.
On June 12, 2020 at 5:40 AM "Mario, IZ8DBJ" <iz8dbj@...> wrote:
Yes, just use the latest version of logger32.
73 de Mario, IZ8DBJ
Il giorno gio 11 giu 2020 alle 19:21 Bob <
k4cy@...> ha scritto:
Mario, did you try Logger32 version 3.50.418? SeventyThree(s).
On June 11, 2020 at 3:11 AM "Mario, IZ8DBJ" <
iz8dbj@...> wrote:
Does nobody have idea of as resolving it? I have followed the councils that Bob has given to me, but unfortunately the continuous problem to return the use of Logger32 difficult.
73 Mario, IZ8DBJ
Thanks for reply, but unfortunately the problem has not been resolved, the error appears continuously while launching logger32 and L32lookups in as administrator.
The operating system is win10Pro and 8Gb of Ram.
73 Mario, IZ8DBJ
Il giorno gio 4 giu 2020 alle 08:42 F4FQH Olivier <
unit365@...> ha scritto:
Ciao Bob
Tried l32loockups in admin and same issue.
Work started again a bit so not get the time to check more on this...
Thanks for all your work as usuall.
73s
F4FQH
Olivier
From:
Bob
Sent: Wednesday, June 3, 2020 11:20 PM
To:
hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 error
Maybe one more suggestion ... The error message is reported when Logger32 sends a message to the QRZ Lookup Window to close (like after a QSO is logged, of when the Logbook Entry Window is cleared) and the message fails. If you have Logger32 set to 'Run as Administrator', make sure the L32Lookups software from N2AMG is also set to 'Run as Administrator'. 73.
On June 3, 2020 at 4:33 PM Mario Pesce <
iz8dbj@...> wrote:
Hi Bob,
Thanks for the reply.Unfortunately the enable uso broadcast of dx spots is already deselected.
Any other ideas?
73 Mario, IZ8DBJ
Il giorno mer 3 giu 2020 alle 19:04 Bob <
k4cy@...> ha scritto:
Right click on the DX Spot Window. UNcheck the option ENABLE UDP BROADCAST OF DX SPOTS. SeventyThree(s).
On June 3, 2020 at 12:27 PM Mario Pesce <
iz8dbj@...> wrote:
Hi to all,
well resentful, I have a problem with Logger32, Frequently get the error (attached photo) which blocks the flow of data from the cluster and also logger32. Can you help me please?
|
|
|
Why the report appear duplicates in the comments column?
If there is a function activated, I would appreciate any information
or suggestions to deactivate it.
Thanks in advance.
Radhames (Rada)
HI3B
|
|
|
Do you still se the problem? A picture please. 73.
On June 12, 2020 at 5:40 AM "Mario, IZ8DBJ" <iz8dbj@...> wrote:
Yes, just use the latest version of logger32.
73 de Mario, IZ8DBJ
Il giorno gio 11 giu 2020 alle 19:21 Bob <
k4cy@...> ha scritto:
Mario, did you try Logger32 version 3.50.418? SeventyThree(s).
On June 11, 2020 at 3:11 AM "Mario, IZ8DBJ" <
iz8dbj@...> wrote:
Does nobody have idea of as resolving it? I have followed the councils that Bob has given to me, but unfortunately the continuous problem to return the use of Logger32 difficult.
73 Mario, IZ8DBJ
Thanks for reply, but unfortunately the problem has not been resolved, the error appears continuously while launching logger32 and L32lookups in as administrator.
The operating system is win10Pro and 8Gb of Ram.
73 Mario, IZ8DBJ
Il giorno gio 4 giu 2020 alle 08:42 F4FQH Olivier <
unit365@...> ha scritto:
Ciao Bob
Tried l32loockups in admin and same issue.
Work started again a bit so not get the time to check more on this...
Thanks for all your work as usuall.
73s
F4FQH
Olivier
From:
Bob
Sent: Wednesday, June 3, 2020 11:20 PM
To:
hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 error
Maybe one more suggestion ... The error message is reported when Logger32 sends a message to the QRZ Lookup Window to close (like after a QSO is logged, of when the Logbook Entry Window is cleared) and the message fails. If you have Logger32 set to 'Run as Administrator', make sure the L32Lookups software from N2AMG is also set to 'Run as Administrator'. 73.
On June 3, 2020 at 4:33 PM Mario Pesce <
iz8dbj@...> wrote:
Hi Bob,
Thanks for the reply.Unfortunately the enable uso broadcast of dx spots is already deselected.
Any other ideas?
73 Mario, IZ8DBJ
Il giorno mer 3 giu 2020 alle 19:04 Bob <
k4cy@...> ha scritto:
Right click on the DX Spot Window. UNcheck the option ENABLE UDP BROADCAST OF DX SPOTS. SeventyThree(s).
On June 3, 2020 at 12:27 PM Mario Pesce <
iz8dbj@...> wrote:
Hi to all,
well resentful, I have a problem with Logger32, Frequently get the error (attached photo) which blocks the flow of data from the cluster and also logger32. Can you help me please?
|
|
|
Yes, just use the latest version of logger32. 73 de Mario, IZ8DBJ
Il giorno gio 11 giu 2020 alle 19:21 Bob < k4cy@...> ha scritto:
Mario, did you try Logger32 version 3.50.418? SeventyThree(s).
On June 11, 2020 at 3:11 AM "Mario, IZ8DBJ" <iz8dbj@...> wrote:
Does nobody have idea of as resolving it? I have followed the councils that Bob has given to me, but unfortunately the continuous problem to return the use of Logger32 difficult.
73 Mario, IZ8DBJ
Thanks for reply, but unfortunately the problem has not been resolved, the error appears continuously while launching logger32 and L32lookups in as administrator.
The operating system is win10Pro and 8Gb of Ram.
73 Mario, IZ8DBJ
Il giorno gio 4 giu 2020 alle 08:42 F4FQH Olivier <
unit365@...> ha scritto:
Ciao Bob
Tried l32loockups in admin and same issue.
Work started again a bit so not get the time to check more on this...
Thanks for all your work as usuall.
73s
F4FQH
Olivier
From:
Bob
Sent: Wednesday, June 3, 2020 11:20 PM
To:
hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 error
Maybe one more suggestion ... The error message is reported when Logger32 sends a message to the QRZ Lookup Window to close (like after a QSO is logged, of when the Logbook Entry Window is cleared) and the message fails. If you have Logger32 set to 'Run as Administrator', make sure the L32Lookups software from N2AMG is also set to 'Run as Administrator'. 73.
On June 3, 2020 at 4:33 PM Mario Pesce <
iz8dbj@...> wrote:
Hi Bob,
Thanks for the reply.Unfortunately the enable uso broadcast of dx spots is already deselected.
Any other ideas?
73 Mario, IZ8DBJ
Il giorno mer 3 giu 2020 alle 19:04 Bob <
k4cy@...> ha scritto:
Right click on the DX Spot Window. UNcheck the option ENABLE UDP BROADCAST OF DX SPOTS. SeventyThree(s).
On June 3, 2020 at 12:27 PM Mario Pesce <
iz8dbj@...> wrote:
Hi to all,
well resentful, I have a problem with Logger32, Frequently get the error (attached photo) which blocks the flow of data from the cluster and also logger32. Can you help me please?
|
|
|
Re: Any word from the ARRL yet?
Well now that you put it that way ummm No !
Dave N8DC
--
Sent from Yahoo Email App for Android
Thursday, 11 June 2020, 09:46PM -04:00 from Bob k4cy@...:
Dave, just trying to be proactive. There's a lot of logging programs out there. When Antifa officially takes control, and the UN/IARU/ARRL give their blessing, don't you want to be the first on the block to get credit for a 'New one'? SeventyThree(s).
On June 11, 2020 at 9:29 PM Dave Colliau <n8dc-8@...> wrote:
Bob. Whatever it is your on have the doctors adjust the dosage . I am worried for you .
Dave N8DC
--
Sent from Yahoo Email App for Android Thursday, 11 June 2020, 09:26PM -04:00 from Bob
k4cy@...:
Inquiring minds want to know? When will Washington State (top left corner of the USA) qualify for 'New Country' status? I have made the necessary changes to Logger32, and pending IARU and ARRL blessing, we're a heartbeat away from a new one. Let me know, and an auto-update is a mouse click away ... For the USA-CA chasers, so sad, you just lost 39 ... This is more fun than trying to put frogs in a box ... SeventyThree(s)AndBackToNetOverOver.
|
|
|
Re: Any word from the ARRL yet?
Dave, just trying to be proactive. There's a lot of logging programs out there. When Antifa officially takes control, and the UN/IARU/ARRL give their blessing, don't you want to be the first on the block to get credit for a 'New one'? SeventyThree(s).
On June 11, 2020 at 9:29 PM Dave Colliau <n8dc-8@...> wrote:
Bob. Whatever it is your on have the doctors adjust the dosage . I am worried for you .
Dave N8DC
--
Sent from Yahoo Email App for Android Thursday, 11 June 2020, 09:26PM -04:00 from Bob
k4cy@...:
Inquiring minds want to know? When will Washington State (top left corner of the USA) qualify for 'New Country' status? I have made the necessary changes to Logger32, and pending IARU and ARRL blessing, we're a heartbeat away from a new one. Let me know, and an auto-update is a mouse click away ... For the USA-CA chasers, so sad, you just lost 39 ... This is more fun than trying to put frogs in a box ... SeventyThree(s)AndBackToNetOverOver.
|
|
|
Re: Any word from the ARRL yet?
Bob. Whatever it is your on have the doctors adjust the dosage . I am worried for you .
Dave N8DC
--
Sent from Yahoo Email App for Android
Thursday, 11 June 2020, 09:26PM -04:00 from Bob k4cy@...:
Inquiring minds want to know? When will Washington State (top left corner of the USA) qualify for 'New Country' status? I have made the necessary changes to Logger32, and pending IARU and ARRL blessing, we're a heartbeat away from a new one. Let me know, and an auto-update is a mouse click away ... For the USA-CA chasers, so sad, you just lost 39 ... This is more fun than trying to put frogs in a box ... SeventyThree(s)AndBackToNetOverOver.
|
|
|
Any word from the ARRL yet?
Inquiring minds want to know? When will Washington State (top left corner of the USA) qualify for 'New Country' status? I have made the necessary changes to Logger32, and pending IARU and ARRL blessing, we're a heartbeat away from a new one. Let me know, and an auto-update is a mouse click away ... For the USA-CA chasers, so sad, you just lost 39 ... This is more fun than trying to put frogs in a box ... SeventyThree(s)AndBackToNetOverOver.
|
|
|
Mario, did you try Logger32 version 3.50.418? SeventyThree(s).
On June 11, 2020 at 3:11 AM "Mario, IZ8DBJ" <iz8dbj@...> wrote:
Does nobody have idea of as resolving it? I have followed the councils that Bob has given to me, but unfortunately the continuous problem to return the use of Logger32 difficult.
73 Mario, IZ8DBJ
Thanks for reply, but unfortunately the problem has not been resolved, the error appears continuously while launching logger32 and L32lookups in as administrator.
The operating system is win10Pro and 8Gb of Ram.
73 Mario, IZ8DBJ
Il giorno gio 4 giu 2020 alle 08:42 F4FQH Olivier <
unit365@...> ha scritto:
Ciao Bob
Tried l32loockups in admin and same issue.
Work started again a bit so not get the time to check more on this...
Thanks for all your work as usuall.
73s
F4FQH
Olivier
From:
Bob
Sent: Wednesday, June 3, 2020 11:20 PM
To:
hamlogger@groups.io
Subject: Re: [hamlogger] Logger32 error
Maybe one more suggestion ... The error message is reported when Logger32 sends a message to the QRZ Lookup Window to close (like after a QSO is logged, of when the Logbook Entry Window is cleared) and the message fails. If you have Logger32 set to 'Run as Administrator', make sure the L32Lookups software from N2AMG is also set to 'Run as Administrator'. 73.
On June 3, 2020 at 4:33 PM Mario Pesce <
iz8dbj@...> wrote:
Hi Bob,
Thanks for the reply.Unfortunately the enable uso broadcast of dx spots is already deselected.
Any other ideas?
73 Mario, IZ8DBJ
Il giorno mer 3 giu 2020 alle 19:04 Bob <
k4cy@...> ha scritto:
Right click on the DX Spot Window. UNcheck the option ENABLE UDP BROADCAST OF DX SPOTS. SeventyThree(s).
On June 3, 2020 at 12:27 PM Mario Pesce <
iz8dbj@...> wrote:
Hi to all,
well resentful, I have a problem with Logger32, Frequently get the error (attached photo) which blocks the flow of data from the cluster and also logger32. Can you help me please?
|
|
|
Ha! I think you'll enjoy it on this reflector. SeventyThree(s).
PS. the following is an extract from the groups.io intro to this reflector ...
However, there is always the risk of being castigated and publicly flogged on this reflector, it adds to the challenge, and (hopefully) encourages people to try to figure out things for themselves ...
On June 11, 2020 at 10:37 AM Marty W0EET <mhtmr10@...> wrote:
Bob and Vince,
Thanks for your detailed yet inappropriate and unnecessarily condescending responses. The problem was I, as a first time Telnet user, assumed VE7CC was streaming spots based on my filter settings and didn't look carefully enough at the content detail. In reality, they filter out FT8 spots by default. If you're seeing FT8 spots you must have turned it on via command line as described at VE7CC. So when I wasn't seeing FT8 spots in L32 I assumed there was a problem with the filtering in the DX Spotting. My bad.
And one final point if I may. I'm a casual FT8 user, almost exclusively on 6m. I agree it's "mindless" but with a compromise antenna during the sunspot minimum it's better than nothing. I've been licensed since the mid '60s, have 324 countries confirmed, have built numerous QRP transceivers and antenna systems, tens of thousands of CW contacts operating from 3 countries, been coding since Basic, a BSEE. SO BUGGER OFF.
SeventyThree(s)
|
|
|
Re: UDP Auto flagging for upload to LOTW?
AHHHHH I KNEW I was missing something. Thank you Everyone. I got it now....all is well in Missouri,
|
|
|
