Date   

Re: Strange behavior in JTDX 150

G4RRM Pete
 

Thank Aki

I know how to stop it happening but it is annoying little niggle.

73
Pete
G4RRM

-----Original Message-----
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of ja1nlx
Sent: 10 May 2020 08:28
To: hamlogger@groups.io
Subject: Re: [hamlogger] Strange behavior in JTDX 150

Pete

We believe that this kind of software (HamLib in jtdx/wsjtx) should not control

TRX power ON/OFF. I do not understand why HamLib implemented this.

73


On 2020/05/10 16:07, G4RRM Pete wrote:
Hi Aki

I have the same issue with my FT5k and Expert 1k.
I have reported this to the JTDX group.

Also noticed is, from cold start up, if you run the software before
turning on the radio it will switch on itself and the amp (linked via band data) If you turn radio off first, likewise it will restart if you don’t close the software quickly.


If you turn the software off before the radio all seems to be ok.

I was told on another group this would be fixed in an update, but still happens in rc150.
I'd suggest you let them know as the guy I was mailing didn’t seem aware!


73
Pete
G4RRM

-----Original Message-----
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of
ja1nlx
Sent: 10 May 2020 02:42
To: Hamlogger
Subject: [hamlogger] Strange behavior in JTDX 150

It is very strange/annoying at least for me though....

If you have icom radio then try this. I notice this with ic7610.

1. Power off your radio.
2. Run jtdx
3. Your radio turns ON automatically after a while.

This does not happen with my K3 and TS480.
--
73 de aki
JA1NLX


Re: Strange behavior in JTDX 150

ja1nlx
 

Pete

We believe that this kind of software (HamLib in jtdx/wsjtx) should not control

TRX power ON/OFF. I do not understand why HamLib implemented this.

73

On 2020/05/10 16:07, G4RRM Pete wrote:
Hi Aki

I have the same issue with my FT5k and Expert 1k.
I have reported this to the JTDX group.

Also noticed is, from cold start up, if you run the software before turning on the radio it will switch on itself and the amp (linked via band data)
If you turn radio off first, likewise it will restart if you don’t close the software quickly.


If you turn the software off before the radio all seems to be ok.

I was told on another group this would be fixed in an update, but still happens in rc150.
I'd suggest you let them know as the guy I was mailing didn’t seem aware!


73
Pete
G4RRM

-----Original Message-----
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of ja1nlx
Sent: 10 May 2020 02:42
To: Hamlogger
Subject: [hamlogger] Strange behavior in JTDX 150

It is very strange/annoying at least for me though....

If you have icom radio then try this. I notice this with ic7610.

1. Power off your radio.
2. Run jtdx
3. Your radio turns ON automatically after a while.

This does not happen with my K3 and TS480.
--
73 de aki
JA1NLX


Re: Strange behavior in JTDX 150

G4RRM Pete
 

Hi Aki

I have the same issue with my FT5k and Expert 1k.
I have reported this to the JTDX group.

Also noticed is, from cold start up, if you run the software before turning on the radio it will switch on itself and the amp (linked via band data)
If you turn radio off first, likewise it will restart if you don’t close the software quickly.


If you turn the software off before the radio all seems to be ok.

I was told on another group this would be fixed in an update, but still happens in rc150.
I'd suggest you let them know as the guy I was mailing didn’t seem aware!


73
Pete
G4RRM

-----Original Message-----
From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of ja1nlx
Sent: 10 May 2020 02:42
To: Hamlogger
Subject: [hamlogger] Strange behavior in JTDX 150

It is very strange/annoying at least for me though....

If you have icom radio then try this. I notice this with ic7610.

1. Power off your radio.
2. Run jtdx
3. Your radio turns ON automatically after a while.

This does not happen with my K3 and TS480.

--
73 de aki
JA1NLX


Re: Logger32 US callsign/states update?

ja1nlx
 

Why you do not use internal or external lookup utility ?

73

On 2020/05/10 15:13, C Romocea wrote:
I feared that was the case. It’s using a generic locations for US callsigns which is not very helpful. I think MacLogger offers this facility by connecting to qrz.com. A bit like eqsl.cc where you can can just hover your mouse over a US callsign and it will show the correct state.
--
73 de aki
JA1NLX


Re: Logger32 US callsign/states update?

C Romocea
 

I feared that was the case. It’s using a generic locations for US callsigns which is not very helpful. I think MacLogger offers this facility by connecting to qrz.com. A bit like eqsl.cc where you can can just hover your mouse over a US callsign and it will show the correct state.


Re: l32 country update error

C Romocea
 

Thank you both Jim and Bob. I have updated l32 to latest release and the country exception update performed flawlessly. Who would have known?


Re: The latest JTDX version

Gary Hinson
 

Admittedly I may not be using the very latest version but I think mine is a beta of v150 and it does have the reset function:

 

 

Do you have the other functions?  Or is it totally kaput?

 

73

Gary  ZL2iFB

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Vince Shirley
Sent: 10 May 2020 13:33
To: hamlogger@groups.io
Subject: Re: [hamlogger] The latest JTDX version

 

Hi Gary.

 

There's no reset button in 150, there is in 149....

 

Vince

 

On Sun, 10 May 2020 at 02:30, Gary Hinson <Gary@...> wrote:

Hi Vince.

 

If the band selector isn’t working, we need to reset the stored frequencies:

·      Pres F2 to open JTDX settings

·      Open the Frequencies tab

·      Right click in the [empty] table and select Reset

·      Optionally: reconfigure all your custom frequencies

·      OK or close the settings

·      Check that you can now select bands and frequencies

 

I gather this is a side-effect of changes to the configuration file. 

 

73

Gary  ZL2iFB

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Vince Shirley
Sent: 10 May 2020 12:56
To: hamlogger@groups.io
Subject: Re: [hamlogger] The latest JTDX version

 

Aki,

 

Thanks - I've installed the new version changed the path and everything works as it should BUT JTDX shows frequency in red and won't let me change bands.  I stress that  everything works but I just can't change bands.

 

Reverting to v149, everything is fine.

 

Should I have uninstalled 149 before installing 150?

 

Vince G0ORC

 

Vince

 

 

 

 

 

On Sat, 9 May 2020 at 23:25, ja1nlx <ayoshida0205@...> wrote:

ver 2.1.0-rc150 has been released.  https://jtdx.tech/en/

The default installation folder is now C:\JTDX64\150 (64 bit version)
It will be C:\JTDX64\151 for next release.

This means that JTDX is installed in different folder and you should change
path in UDP BandMap Start menu.

I recommend you to install JTDX in the same folder, C:\JTDX64\ for example.


--
73 de aki
JA1NLX


Re: l32 country update error

Bob
 

If you look carefully at the picture you attached, you will see that the size of the file you were downloading was 16 bytes. You will also see that Logger32 downloaded 16 bytes. Typically, the exceptions update is something like 500KB. 16 bytes? What was Club Log trying to tell you? How many bytes is 'I'm out to lunch', 'Sorry I can't answer the phone right now', 'Down for maintenance', 'I'm under quarantine'?  SeventyThree(s)

On May 9, 2020 at 3:59 PM C Romocea <cromocea@...> wrote:

Hi,

can anyone help me understand why it won't decompress the file?

Thanks



 


Re: Strange behavior in JTDX 150

Jim Altman
 

It will turn on my Kenwood 890.



Jim Altman
jaltman636@...

-----Original Message-----
From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of ja1nlx
Sent: Saturday, May 9, 2020 9:42 PM
To: Hamlogger <hamlogger@groups.io>
Subject: [hamlogger] Strange behavior in JTDX 150

It is very strange/annoying at least for me though....

If you have icom radio then try this. I notice this with ic7610.

1. Power off your radio.
2. Run jtdx
3. Your radio turns ON automatically after a while.

This does not happen with my K3 and TS480.

--
73 de aki
JA1NLX


Strange behavior in JTDX 150

ja1nlx
 

It is very strange/annoying at least for me though....

If you have icom radio then try this. I notice this with ic7610.

1. Power off your radio.
2. Run jtdx
3. Your radio turns ON automatically after a while.

This does not happen with my K3 and TS480.

--
73 de aki
JA1NLX


Re: The latest JTDX version

Vince Shirley
 

Ahh... there we go.

It right-click magic again.

Thanks Bob,

Now where are my hearing aids.....

Vince

On Sun, 10 May 2020 at 02:33, Bob <k4cy@...> wrote:
No reset button? OK, Is there two empty panes?  Right click the upper one and select RESET ... come to think of it, I think there's a tooltip about that if you hover the mouse over the upper pane ... No, loss of hearing is as result of countless years of small arms fire, jet engines. artillery, and four wives. Add to that, doing my best Jaques Cousteau imitation at my age .. It happens every year on our annual 'youth is wasted on the young' trip. SeventyThree(s).
On May 9, 2020 at 9:19 PM Vince Shirley <vince.g0orc@...> wrote:

Thanks Bob.

Sorry, no reset button and no frequencies listed either.

Is loss of hearing another COVID symptom, or just a natural defence mechanism to the real world you find yourself in?

Vince

On Sun, 10 May 2020 at 02:09, Bob < k4cy@...> wrote:
No JTDX on this notebook, so this is a SWAG - On JTDX, click the FILE menu. Click SETTINGS | FREQUENCIES. Click the RESET button at the upper right. SeventyThree(s)

PS. I've lost my hearing 100%. No diving today. I'm safe ... One of the carnivorous symptoms is loss of taste/smell :)
On May 9, 2020 at 8:56 PM Vince Shirley < vince.g0orc@...> wrote:

Aki,

Thanks - I've installed the new version changed the path and everything works as it should BUT JTDX shows frequency in red and won't let me change bands.  I stress that  everything works but I just can't change bands.

Reverting to v149, everything is fine.

Should I have uninstalled 149 before installing 150?

Vince G0ORC

Vince





On Sat, 9 May 2020 at 23:25, ja1nlx < ayoshida0205@...> wrote:
ver 2.1.0-rc150 has been released.  https://jtdx.tech/en/

The default installation folder is now C:\JTDX64\150 (64 bit version)
It will be C:\JTDX64\151 for next release.

This means that JTDX is installed in different folder and you should change
path in UDP BandMap Start menu.

I recommend you to install JTDX in the same folder, C:\JTDX64\ for example.


--
73 de aki
JA1NLX




 

 

 


 


Re: The latest JTDX version

Vince Shirley
 

Hi Gary.

There's no reset button in 150, there is in 149....

Vince

On Sun, 10 May 2020 at 02:30, Gary Hinson <Gary@...> wrote:

Hi Vince.

 

If the band selector isn’t working, we need to reset the stored frequencies:

  • Pres F2 to open JTDX settings
  • Open the Frequencies tab
  • Right click in the [empty] table and select Reset
  • Optionally: reconfigure all your custom frequencies
  • OK or close the settings
  • Check that you can now select bands and frequencies

 

I gather this is a side-effect of changes to the configuration file. 

 

73

Gary  ZL2iFB

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Vince Shirley
Sent: 10 May 2020 12:56
To: hamlogger@groups.io
Subject: Re: [hamlogger] The latest JTDX version

 

Aki,

 

Thanks - I've installed the new version changed the path and everything works as it should BUT JTDX shows frequency in red and won't let me change bands.  I stress that  everything works but I just can't change bands.

 

Reverting to v149, everything is fine.

 

Should I have uninstalled 149 before installing 150?

 

Vince G0ORC

 

Vince

 

 

 

 

 

On Sat, 9 May 2020 at 23:25, ja1nlx <ayoshida0205@...> wrote:

ver 2.1.0-rc150 has been released.  https://jtdx.tech/en/

The default installation folder is now C:\JTDX64\150 (64 bit version)
It will be C:\JTDX64\151 for next release.

This means that JTDX is installed in different folder and you should change
path in UDP BandMap Start menu.

I recommend you to install JTDX in the same folder, C:\JTDX64\ for example.


--
73 de aki
JA1NLX



Re: The latest JTDX version

Bob
 

No reset button? OK, Is there two empty panes?  Right click the upper one and select RESET ... come to think of it, I think there's a tooltip about that if you hover the mouse over the upper pane ... No, loss of hearing is as result of countless years of small arms fire, jet engines. artillery, and four wives. Add to that, doing my best Jaques Cousteau imitation at my age .. It happens every year on our annual 'youth is wasted on the young' trip. SeventyThree(s).

On May 9, 2020 at 9:19 PM Vince Shirley <vince.g0orc@...> wrote:

Thanks Bob.

Sorry, no reset button and no frequencies listed either.

Is loss of hearing another COVID symptom, or just a natural defence mechanism to the real world you find yourself in?

Vince

On Sun, 10 May 2020 at 02:09, Bob < k4cy@...> wrote:
No JTDX on this notebook, so this is a SWAG - On JTDX, click the FILE menu. Click SETTINGS | FREQUENCIES. Click the RESET button at the upper right. SeventyThree(s)

PS. I've lost my hearing 100%. No diving today. I'm safe ... One of the carnivorous symptoms is loss of taste/smell :)
On May 9, 2020 at 8:56 PM Vince Shirley < vince.g0orc@...> wrote:

Aki,

Thanks - I've installed the new version changed the path and everything works as it should BUT JTDX shows frequency in red and won't let me change bands.  I stress that  everything works but I just can't change bands.

Reverting to v149, everything is fine.

Should I have uninstalled 149 before installing 150?

Vince G0ORC

Vince





On Sat, 9 May 2020 at 23:25, ja1nlx < ayoshida0205@...> wrote:
ver 2.1.0-rc150 has been released.  https://jtdx.tech/en/

The default installation folder is now C:\JTDX64\150 (64 bit version)
It will be C:\JTDX64\151 for next release.

This means that JTDX is installed in different folder and you should change
path in UDP BandMap Start menu.

I recommend you to install JTDX in the same folder, C:\JTDX64\ for example.


--
73 de aki
JA1NLX




 

 

 


 


Re: The latest JTDX version

Gary Hinson
 

Hi Vince.

 

If the band selector isn’t working, we need to reset the stored frequencies:

  • Pres F2 to open JTDX settings
  • Open the Frequencies tab
  • Right click in the [empty] table and select Reset
  • Optionally: reconfigure all your custom frequencies
  • OK or close the settings
  • Check that you can now select bands and frequencies

 

I gather this is a side-effect of changes to the configuration file. 

 

73

Gary  ZL2iFB

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of Vince Shirley
Sent: 10 May 2020 12:56
To: hamlogger@groups.io
Subject: Re: [hamlogger] The latest JTDX version

 

Aki,

 

Thanks - I've installed the new version changed the path and everything works as it should BUT JTDX shows frequency in red and won't let me change bands.  I stress that  everything works but I just can't change bands.

 

Reverting to v149, everything is fine.

 

Should I have uninstalled 149 before installing 150?

 

Vince G0ORC

 

Vince

 

 

 

 

 

On Sat, 9 May 2020 at 23:25, ja1nlx <ayoshida0205@...> wrote:

ver 2.1.0-rc150 has been released.  https://jtdx.tech/en/

The default installation folder is now C:\JTDX64\150 (64 bit version)
It will be C:\JTDX64\151 for next release.

This means that JTDX is installed in different folder and you should change
path in UDP BandMap Start menu.

I recommend you to install JTDX in the same folder, C:\JTDX64\ for example.


--
73 de aki
JA1NLX



Re: The latest JTDX version

ja1nlx
 

Vince

Right click on the table . You see "Reset"

73

On 2020/05/10 10:19, Vince Shirley wrote:
Thanks Bob.

Sorry, no reset button and no frequencies listed either.

Is loss of hearing another COVID symptom, or just a natural defence mechanism to the real world you find yourself in?

Vince

On Sun, 10 May 2020 at 02:09, Bob <k4cy@...> wrote:
No JTDX on this notebook, so this is a SWAG - On JTDX, click the FILE menu. Click SETTINGS | FREQUENCIES. Click the RESET button at the upper right. SeventyThree(s)

PS. I've lost my hearing 100%. No diving today. I'm safe ... One of the carnivorous symptoms is loss of taste/smell :)
On May 9, 2020 at 8:56 PM Vince Shirley <vince.g0orc@...> wrote:

Aki,

Thanks - I've installed the new version changed the path and everything works as it should BUT JTDX shows frequency in red and won't let me change bands.  I stress that  everything works but I just can't change bands.

Reverting to v149, everything is fine.

Should I have uninstalled 149 before installing 150?

Vince G0ORC

Vince





On Sat, 9 May 2020 at 23:25, ja1nlx < ayoshida0205@...> wrote:
ver 2.1.0-rc150 has been released.  https://jtdx.tech/en/

The default installation folder is now C:\JTDX64\150 (64 bit version)
It will be C:\JTDX64\151 for next release.

This means that JTDX is installed in different folder and you should change
path in UDP BandMap Start menu.

I recommend you to install JTDX in the same folder, C:\JTDX64\ for example.


--
73 de aki
JA1NLX




 
--
73 de aki
JA1NLX


Re: The latest JTDX version

Vince Shirley
 

There is a reset button in 149 but not in 150

Vince

On Sun, 10 May 2020 at 02:09, Bob <k4cy@...> wrote:
No JTDX on this notebook, so this is a SWAG - On JTDX, click the FILE menu. Click SETTINGS | FREQUENCIES. Click the RESET button at the upper right. SeventyThree(s)

PS. I've lost my hearing 100%. No diving today. I'm safe ... One of the carnivorous symptoms is loss of taste/smell :)
On May 9, 2020 at 8:56 PM Vince Shirley <vince.g0orc@...> wrote:

Aki,

Thanks - I've installed the new version changed the path and everything works as it should BUT JTDX shows frequency in red and won't let me change bands.  I stress that  everything works but I just can't change bands.

Reverting to v149, everything is fine.

Should I have uninstalled 149 before installing 150?

Vince G0ORC

Vince





On Sat, 9 May 2020 at 23:25, ja1nlx < ayoshida0205@...> wrote:
ver 2.1.0-rc150 has been released.  https://jtdx.tech/en/

The default installation folder is now C:\JTDX64\150 (64 bit version)
It will be C:\JTDX64\151 for next release.

This means that JTDX is installed in different folder and you should change
path in UDP BandMap Start menu.

I recommend you to install JTDX in the same folder, C:\JTDX64\ for example.


--
73 de aki
JA1NLX




 


Re: The latest JTDX version

Vince Shirley
 

Thanks Bob.

Sorry, no reset button and no frequencies listed either.

Is loss of hearing another COVID symptom, or just a natural defence mechanism to the real world you find yourself in?

Vince

On Sun, 10 May 2020 at 02:09, Bob <k4cy@...> wrote:
No JTDX on this notebook, so this is a SWAG - On JTDX, click the FILE menu. Click SETTINGS | FREQUENCIES. Click the RESET button at the upper right. SeventyThree(s)

PS. I've lost my hearing 100%. No diving today. I'm safe ... One of the carnivorous symptoms is loss of taste/smell :)
On May 9, 2020 at 8:56 PM Vince Shirley <vince.g0orc@...> wrote:

Aki,

Thanks - I've installed the new version changed the path and everything works as it should BUT JTDX shows frequency in red and won't let me change bands.  I stress that  everything works but I just can't change bands.

Reverting to v149, everything is fine.

Should I have uninstalled 149 before installing 150?

Vince G0ORC

Vince





On Sat, 9 May 2020 at 23:25, ja1nlx < ayoshida0205@...> wrote:
ver 2.1.0-rc150 has been released.  https://jtdx.tech/en/

The default installation folder is now C:\JTDX64\150 (64 bit version)
It will be C:\JTDX64\151 for next release.

This means that JTDX is installed in different folder and you should change
path in UDP BandMap Start menu.

I recommend you to install JTDX in the same folder, C:\JTDX64\ for example.


--
73 de aki
JA1NLX




 


Re: The latest JTDX version

Bob
 

No JTDX on this notebook, so this is a SWAG - On JTDX, click the FILE menu. Click SETTINGS | FREQUENCIES. Click the RESET button at the upper right. SeventyThree(s)

PS. I've lost my hearing 100%. No diving today. I'm safe ... One of the carnivorous symptoms is loss of taste/smell :)

On May 9, 2020 at 8:56 PM Vince Shirley <vince.g0orc@...> wrote:

Aki,

Thanks - I've installed the new version changed the path and everything works as it should BUT JTDX shows frequency in red and won't let me change bands.  I stress that  everything works but I just can't change bands.

Reverting to v149, everything is fine.

Should I have uninstalled 149 before installing 150?

Vince G0ORC

Vince





On Sat, 9 May 2020 at 23:25, ja1nlx < ayoshida0205@...> wrote:
ver 2.1.0-rc150 has been released.  https://jtdx.tech/en/

The default installation folder is now C:\JTDX64\150 (64 bit version)
It will be C:\JTDX64\151 for next release.

This means that JTDX is installed in different folder and you should change
path in UDP BandMap Start menu.

I recommend you to install JTDX in the same folder, C:\JTDX64\ for example.


--
73 de aki
JA1NLX




 


Re: The latest JTDX version

Vince Shirley
 

Aki,

Thanks - I've installed the new version changed the path and everything works as it should BUT JTDX shows frequency in red and won't let me change bands.  I stress that  everything works but I just can't change bands.

Reverting to v149, everything is fine.

Should I have uninstalled 149 before installing 150?

Vince G0ORC

Vince





On Sat, 9 May 2020 at 23:25, ja1nlx <ayoshida0205@...> wrote:
ver 2.1.0-rc150 has been released.  https://jtdx.tech/en/

The default installation folder is now C:\JTDX64\150 (64 bit version)
It will be C:\JTDX64\151 for next release.

This means that JTDX is installed in different folder and you should change
path in UDP BandMap Start menu.

I recommend you to install JTDX in the same folder, C:\JTDX64\ for example.


--
73 de aki
JA1NLX




The latest JTDX version

ja1nlx
 

ver 2.1.0-rc150 has been released.  https://jtdx.tech/en/

The default installation folder is now C:\JTDX64\150 (64 bit version)
It will be C:\JTDX64\151 for next release.

This means that JTDX is installed in different folder and you should change
path in UDP BandMap Start menu.

I recommend you to install JTDX in the same folder, C:\JTDX64\ for example.


--
73 de aki
JA1NLX