Date   

Yeasu FT-920 and Logger32

rene, PA9RX
 

Good evening,

I use a Yaesu FT-920 and i noticed that when i click on a DX spot that the rig will go to that freq but does not change the mode. 
Are there others who have the same problem and what can i do to solve it ?
Ham Radio De Luxe can set the mode via cat so the problem is not the rig.

best 73, René PA9RX


Logger32 users

Jim Hargrave
 

NOTICE FOR ALL USERS:

The Logger32 (Hamlogger@groups.io) group has 3856 members. We also have 30 volunteer BETA testers.

 

This users group was established to keep users informed of changes and help resolve problems encountered by users during the day to day operation of this software.

I encourage users to post any problem you encounter  to this group. If you have knowledge of the problem reported, please respond with suggestions that might be helpful to resolve the users reported problem. Please respond with enough detail and  reference to the original post. “Me too” and  “Mine  works ok” is not very helpful and just  delays resolution.

 

Bob / K4CY is the author and single programmer for the Logger32 software. This keeps him very busy and has once again requested that users please refrain from contacting him direct. The Beta testers monitor  the Hamlogger group and in most cases can help resolve problems without interrupting BOB’S activity.

 

Your respect and consideration is greatly appreciated!

 

Jim – w5ifp-

 


Re: Logger32.exe Deleted

Paul - W1PR
 

I submitted the .409 file for analysis to one f the on line virus checkers. It came back clean.
I have deleted McAfee and enabled both Windows Defender and MalwareBytes. Virus scans show no suspicious files, only a couple of pup's that I was happy to delete. Now Running L32 .510 with out problems. 
    I have McAfee running on my other home LAN computers. It has never identified anything suspicious. Their problem with L32 multiple versions seems to be a false positive. Here's hoping that this will be the only "virus" I get - hi.
   Many thanks to all who responded with some excellent suggestions.
   73 de Paul - W1PR


Re: Logger32.exe Deleted

Ken McVie <kenmc@...>
 

Kaspersky didn't complain!!

73
Ken ZL4NR

On 24/03/2020 1:57 pm, Gerald Boutin wrote:
On Mon, Mar 23, 2020 at 08:50 PM, Michael Harris wrote:
Has anyone subject this to Virus Total url www.virustotal.com

I haven't updated and at present don't intend too.

Regards,

Mike VP8NO

Yesterday, there were 3 detections on virustotal, today it is up to 7 of 73.


 
--
Gerald, VE1DT


Re: Logger32.exe Deleted

Gerald Boutin
 

On Mon, Mar 23, 2020 at 08:50 PM, Michael Harris wrote:
Has anyone subject this to Virus Total url www.virustotal.com

I haven't updated and at present don't intend too.

Regards,

Mike VP8NO

Yesterday, there were 3 detections on virustotal, today it is up to 7 of 73.


 
--
Gerald, VE1DT


Re: Logger32.exe Deleted

Michael Harris
 

Has anyone subject this to Virus Total url www.virustotal.com

I haven't updated and at present don't intend too.

Regards,

Mike VP8NO

On 23/03/2020 19:23, Damian M0BKV via Groups.Io wrote:
McAfee deletrs Logger32.exe from my excluded list also. Which it shouldn't but does so I put V409 of the exe file in the folder after V410 is deleted and don't do any updates now. Question is what is in the V410 exe file that makes McAfee think its a virus.


Re: Logger32.exe Deleted

ja1nlx
 

Ask your question to McAfee.

73

On 2020/03/24 7:23, Damian M0BKV via Groups.Io wrote:
McAfee deletrs Logger32.exe from my excluded list also. Which it shouldn't but does so I put V409 of the exe file in the folder after V410 is deleted and don't do any updates now. Question is what is in the V410 exe file that makes McAfee think its a virus.
--
73 de aki
JA1NLX


Re: Logger32.exe Deleted

Damian M0BKV
 

McAfee deletrs Logger32.exe from my excluded list also. Which it shouldn't but does so I put V409 of the exe file in the folder after V410 is deleted and don't do any updates now. Question is what is in the V410 exe file that makes McAfee think its a virus.


Re: Logger32.exe Deleted

Larry Fravel
 

Then dump McAffee as well.  Windows Defender and AVG Free ware have no problems with logger32.   They are both good.

Larry K8YYY

--
Today is a good day to have a GREAT Day!

Virus-free. www.avg.com


Re: Logger32.exe Deleted

Gerry VE6LB
 

Don't us McAffee and 4.410 works fine on all 3 of my W1-64 machines. McAffee needs to fix this. Happened a while ago with McAffee.

On 2020-03-23 11:26, Julian GW4JBQ wrote:
McAffee deletes it from the Excluded list as well. I have gone back to v407 until there is a working update

--
73, Gerry VE6LB
ve6lb@telus.net
ve6lb.ve6hams.com


Re: Logger32.exe Deleted

Julian GW4JBQ
 

McAffee deletes it from the Excluded list as well. I have gone back to v407 until there is a working update


Re: Logger32.exe Deleted

Phill Morris (G6EES)
 

SOLUTION

 

I thought I would check my Logger32 and discovered that McAfee now deletes my copy of Logger32.exe (ver 3.50.410)  each time Logger32 tries to start.

Replacing it makes no difference

 

This is how I fixed the Logger32 problem (see also the attached PDF file – I hope it gets to you):

 

I have a version of McAfee that has a different user interface to the ‘normal’ version, so the windows that you see may look different to the screenshots below. So you may have to look for the same function but in a different place in your copy of McAfee.

However, the version I have of McAfee (provided by my broadband supplier) is otherwise exactly the same in operation as the normal commercial product, with the exception of what it looks like to the user.

 

 

 

 

Good luck

 

Phill G6EES

 

________________________.
Phill Morris G6EES
Email phill.morris@...

 

From: hamlogger@groups.io <hamlogger@groups.io> On Behalf Of w1pr@...
Sent: 23 March 2020 03:04
To: hamlogger@groups.io
Subject: Re: [hamlogger] Logger32.exe Deleted

 

Just happened to with McAfee. It let me restore L32 but deleted it again when I tried to start it. Said suspect was something called 6387cc80de0a. I'm using latest version of L32; before this supposed virus turned up it always looked for an update and hasn't found any for at several days. Google search comes up with nothing. DuckDuckGo has a few Russian sites.   Any suggestions?  I'm reluctant to run L32 with antivirus disabled. To have this happen when I'm stuck in the house because of COVID-19 really sucks. TNX de Paul W1PR


Re: SORRY OFF TOPIC: need SWL software for contest

Giuseppe Giunta
 

Ciao Marc,

thanks... It is exactly was i actually use DQR_Log :-) but I have problem with the format generated by this software, I dont know why... I'm looking for something different.

Giù

Il 23/03/2020 13:46, Marc-ON7SS-OO9O ha scritto:

Guiseppe,

Look here

http://sp7dqr.pl/en/contests.php

73  Marc, ON7SS

Amateur Radio Station
ON7SS - OO9O

Marc Domen

http://www.on7ss.be


DM a.i. Antwerpen - 
https://www.uba.be

UBA HF Contest Manager -  https://www.uba.be

EPC Award Manager for BEPA and NLPA awards - https://www.eupsk.com/

30MDG Award Manager for ITU Zones and Prefix Awards - http://www.30mdg.org/

 

Only a boy and his radio

 

Op 23/03/2020 om 13:40 schreef Giuseppe Giunta:

sorry for the off topic! :-)

Good morning everyone,

I'm looking for a software to manage contests as SWL, and able to generate the cabrillo and adif files, to send them to the committee via web page and to import them into the general log; In the Russian DX I used SP7DQR's  DQR_Log, but I can't upload it to their web page, always getting a "fatal error"; waiting for the WPX, what do you recommend me to use? Any idea?

Grazie mille de Giù -  IT9-60339

(op: IT9VDQ one of IB9T crew)


Re: SORRY OFF TOPIC: need SWL software for contest

ON9TT - Marc
 

Guiseppe,

Look here

http://sp7dqr.pl/en/contests.php

73  Marc, ON7SS

Amateur Radio Station
ON7SS - OO9O

Marc Domen

http://www.on7ss.be


DM a.i. Antwerpen - 
https://www.uba.be

UBA HF Contest Manager -  https://www.uba.be

EPC Award Manager for BEPA and NLPA awards - https://www.eupsk.com/

30MDG Award Manager for ITU Zones and Prefix Awards - http://www.30mdg.org/

 

Only a boy and his radio

 

Op 23/03/2020 om 13:40 schreef Giuseppe Giunta:

sorry for the off topic! :-)

Good morning everyone,

I'm looking for a software to manage contests as SWL, and able to generate the cabrillo and adif files, to send them to the committee via web page and to import them into the general log; In the Russian DX I used SP7DQR's  DQR_Log, but I can't upload it to their web page, always getting a "fatal error"; waiting for the WPX, what do you recommend me to use? Any idea?

Grazie mille de Giù -  IT9-60339

(op: IT9VDQ one of IB9T crew)


SORRY OFF TOPIC: need SWL software for contest

Giuseppe Giunta
 

sorry for the off topic! :-)

Good morning everyone,

I'm looking for a software to manage contests as SWL, and able to generate the cabrillo and adif files, to send them to the committee via web page and to import them into the general log; In the Russian DX I used SP7DQR's  DQR_Log, but I can't upload it to their web page, always getting a "fatal error"; waiting for the WPX, what do you recommend me to use? Any idea?

Grazie mille de Giù -  IT9-60339

(op: IT9VDQ one of IB9T crew)


Re: New option in W/C Window

ja1nlx
 

了解しました。

もう一度Logbook entry windowのラベル表示について

フォントによって変更が維持される場合とMSPゴチックに戻ってしまう場合があります。

ArialはMSPゴチックに戻る

HAMはMSPゴチックに戻る場合と変更が維持される場合がある。

Tahomaは変更が維持される。

簡単な話ではないようです。


On 2020/03/23 21:21, Ken JN7FAH wrote:
吉田さん

View > Grid appearance > Show text in local character set
の設定に関連したバグがありますね。
私の場合,Grid fontに Slash Zero Arialを指定していて,それが
W/C窓に正しく反映されないというのが,元々のスレッドでしたが,
View > Grid appearance > Show text in local character set 
をオンにして日本語Windowsシステムフォントセット(MS ゴシック)に
変化させてから,本来はこの設定とは無関係のはずの,
View > Grid appearance > Show grid lines
をオン/オフするとそれに連動して,グリッドフォントがMSゴシック
になったり,Slash Zero Arialになったりします。
フォントコントロール関連ルーチンのバグですね。

これを書いていて,吉田さんのお返事
> メインフォーム下部のフォントはどうやっても日本語フォントですが、Logbook entry windowのフォントは
> 自由に設定できます。右クリック、Setup/Appearance


を拝見しました。以前は,このメニューでフォントをセットしても
再起動すると日本語Windowsシステムフォント(MSゴシック)に戻っ
ていたので,試していなかったのですが,ここまで来て,その頃は
View > Grid appearance > Show text in local character set
という設定が無かったことに気付きました。

そこで,いつもはSlash Zero ArialやMonacoを使うためにオフにし
ていた
View > Grid appearance > Show text in local character set
をオンにして,HAMゴシックを再インストールしてGrid fontとLogbook
entry窓のLabel fontをHAMゴシックに設定したところ再起動してもHAM
ゴシックのまま保たれることがわかりました。

ようするに,Logger32は未だに日本語Windowsで使うと英語フォント
を自由に使うことができないのだということのようです。

なぜ,3.50.409までは, 問題なくW/C窓のフォントに英語フォント
が使えていたのに3.50.410から再起動で日本語システムフォントに戻
るようになってしまったのかは,フォントコントロールルーチン周辺
のバグに由来するものと思われます。

HAMゴシックは,あまり好きでない・・・・とここまで書いて・・まて
よ吉田さんは,あの汚いHAMゴシックではなくてHAM フォントでしたね。

ということでHAMフォントに切り替えてみました。
そしたらやはり再起動するとWindowsシステムフォントに戻ってしまいます。
また振り出しです。

どうしたもんでしょね・・・
今日は,ここまでにしておきます。

また折を見て現象確認を続けたいと思います。

Ken JN7FAH
ex JA0RYN, JA0RYN/7, DL/JA0RYN


2020年3月23日(月) 18:37 ja1nlx <ayoshida0205@...>:

Yes I always use Japanese Windows 10.

Both data and label font are "HAM" (another slashed zero font)

When this happens? Since ver3.50.410 ?


73



On 2020/03/23 18:08, Ken JN7FAH wrote:
Aki,

>Try again with virgin Logger32.ini  (rename Logger32.ini to Logger32.ini.OLD)

I did it, but the font problem was not solved.
It always come back to the ugly font.

Are you using Japanese Windows?
I appreciate if you would show me your Logbook Entry Window.

73 Ken JN7FAH

2020年3月23日(月) 15:39 ja1nlx <ayoshida0205@...>:

I repeated closing/opening Logger32. It works here. This is HAM font.


On 2020/03/23 15:35, ja1nlx via Groups.Io wrote:

or copy Logger32.ini in Update files for ver3.50.xxx and paste it in Logger32 folder.

On 2020/03/23 15:31, ja1nlx via Groups.Io wrote:

Ken

I do not see this problem.

Try again with virgin Logger32.ini  (rename Logger32.ini to Logger32.ini.OLD)

73

On 2020/03/23 15:23, Ken JN7FAH wrote:
Aki,
I have experienced this problem on two different PCs
running Windows 7 and 10, respectively.
I uploaded video to explain what's the problem on 
Logger32 Ver. 3.50.410 running under Japanese Windows
to youtube: 
 
73 Ken JN7FAH


2020年3月23日(月) 10:53 ja1nlx <ayoshida0205@...>:

Ken

I tried this with no problem.

Once Slashed zero Arial set as Grid font it stay in W/C window after closing/opening Logger32.


On 2020/03/23 10:28, Ken JN7FAH wrote:
Aki,
The problem of W/C window has relapsed.
Once it solved by reset font to "Slashed Zero Arial"  as seen in the next image.
image.png
However, once I quit and restart L32 Ver3.50.410,  the ugly
font problem relapse as seen in the next image 
image.png

Corresponding lines in my INI file is as follows.
[WndWorkedConfirmed Settings]
Column 0 Width=495
Column 1 Width=465
Column 2 Width=405
Column 3 Width=405
Column 4 Width=105
Complex Display=False
Consolidate DIGital=True
Selected Band=11927551
Consolidate PHOne=False
Include LoTW=True
Include eQSL=False
Include QSL=False
Current Operator Only=False
[Globals]
Operator=JN7FAH
Frequency Display=KHZ+1
Time Format=hh:mm
Time Format Index=3
Grid Row Height=210
Grid Font Name=Slashed Zero Arial
Grid Forecolor=8388608
Grid Font Size=10

Any suggestion to fix this problem will be appreciated.

73 Ken JN7FAH

2020年3月18日(水) 10:24 Ken JN7FAH via Groups.Io <jn7fah=gmail.com@groups.io>:
Aki,
I fixed it
Thanks
73
Ken JN7FAH

2020年3月18日(水) 6:49 ja1nlx <ayoshida0205@...>:

Ken

Re-set Grid font. (View/Grid appearance/Grid font/color)

73

On 2020/03/17 22:21, Ken JN7FAH wrote:
Hello Aki,

L32 Ver3.50.410 automatically changed font in W/C window.
It seems like ugly Japanese Windows system font.
How can I change it as I like?

Ken JN7FAH

2020年3月17日(火) 8:02 ja1nlx <ayoshida0205@...>:
ver3.50.410 has been released.
New option added in W/C window menu to drag/drop W/C Window columns.


--
73 de aki
JA1NLX



--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX


Re: New option in W/C Window

Ken JN7FAH
 

I am sorry sent Japanese character message.
Please ignore it. 
Ken JN7FAH
ex JA0RYN, JA0RYN/7, DL/JA0RYN


2020年3月23日(月) 21:22 Ken JN7FAH via Groups.Io <jn7fah=gmail.com@groups.io>:

吉田さん

View > Grid appearance > Show text in local character set
の設定に関連したバグがありますね。
私の場合,Grid fontに Slash Zero Arialを指定していて,それが
W/C窓に正しく反映されないというのが,元々のスレッドでしたが,
View > Grid appearance > Show text in local character set 
をオンにして日本語Windowsシステムフォントセット(MS ゴシック)に
変化させてから,本来はこの設定とは無関係のはずの,
View > Grid appearance > Show grid lines
をオン/オフするとそれに連動して,グリッドフォントがMSゴシック
になったり,Slash Zero Arialになったりします。
フォントコントロール関連ルーチンのバグですね。

これを書いていて,吉田さんのお返事
> メインフォーム下部のフォントはどうやっても日本語フォントですが、Logbook entry windowのフォントは
> 自由に設定できます。右クリック、Setup/Appearance


を拝見しました。以前は,このメニューでフォントをセットしても
再起動すると日本語Windowsシステムフォント(MSゴシック)に戻っ
ていたので,試していなかったのですが,ここまで来て,その頃は
View > Grid appearance > Show text in local character set
という設定が無かったことに気付きました。

そこで,いつもはSlash Zero ArialやMonacoを使うためにオフにし
ていた
View > Grid appearance > Show text in local character set
をオンにして,HAMゴシックを再インストールしてGrid fontとLogbook
entry窓のLabel fontをHAMゴシックに設定したところ再起動してもHAM
ゴシックのまま保たれることがわかりました。

ようするに,Logger32は未だに日本語Windowsで使うと英語フォント
を自由に使うことができないのだということのようです。

なぜ,3.50.409までは, 問題なくW/C窓のフォントに英語フォント
が使えていたのに3.50.410から再起動で日本語システムフォントに戻
るようになってしまったのかは,フォントコントロールルーチン周辺
のバグに由来するものと思われます。

HAMゴシックは,あまり好きでない・・・・とここまで書いて・・まて
よ吉田さんは,あの汚いHAMゴシックではなくてHAM フォントでしたね。

ということでHAMフォントに切り替えてみました。
そしたらやはり再起動するとWindowsシステムフォントに戻ってしまいます。
また振り出しです。

どうしたもんでしょね・・・
今日は,ここまでにしておきます。

また折を見て現象確認を続けたいと思います。

Ken JN7FAH
ex JA0RYN, JA0RYN/7, DL/JA0RYN


2020年3月23日(月) 18:37 ja1nlx <ayoshida0205@...>:

Yes I always use Japanese Windows 10.

Both data and label font are "HAM" (another slashed zero font)

When this happens? Since ver3.50.410 ?


73



On 2020/03/23 18:08, Ken JN7FAH wrote:
Aki,

>Try again with virgin Logger32.ini  (rename Logger32.ini to Logger32.ini.OLD)

I did it, but the font problem was not solved.
It always come back to the ugly font.

Are you using Japanese Windows?
I appreciate if you would show me your Logbook Entry Window.

73 Ken JN7FAH

2020年3月23日(月) 15:39 ja1nlx <ayoshida0205@...>:

I repeated closing/opening Logger32. It works here. This is HAM font.


On 2020/03/23 15:35, ja1nlx via Groups.Io wrote:

or copy Logger32.ini in Update files for ver3.50.xxx and paste it in Logger32 folder.

On 2020/03/23 15:31, ja1nlx via Groups.Io wrote:

Ken

I do not see this problem.

Try again with virgin Logger32.ini  (rename Logger32.ini to Logger32.ini.OLD)

73

On 2020/03/23 15:23, Ken JN7FAH wrote:
Aki,
I have experienced this problem on two different PCs
running Windows 7 and 10, respectively.
I uploaded video to explain what's the problem on 
Logger32 Ver. 3.50.410 running under Japanese Windows
to youtube: 
 
73 Ken JN7FAH


2020年3月23日(月) 10:53 ja1nlx <ayoshida0205@...>:

Ken

I tried this with no problem.

Once Slashed zero Arial set as Grid font it stay in W/C window after closing/opening Logger32.


On 2020/03/23 10:28, Ken JN7FAH wrote:
Aki,
The problem of W/C window has relapsed.
Once it solved by reset font to "Slashed Zero Arial"  as seen in the next image.
image.png
However, once I quit and restart L32 Ver3.50.410,  the ugly
font problem relapse as seen in the next image 
image.png

Corresponding lines in my INI file is as follows.
[WndWorkedConfirmed Settings]
Column 0 Width=495
Column 1 Width=465
Column 2 Width=405
Column 3 Width=405
Column 4 Width=105
Complex Display=False
Consolidate DIGital=True
Selected Band=11927551
Consolidate PHOne=False
Include LoTW=True
Include eQSL=False
Include QSL=False
Current Operator Only=False
[Globals]
Operator=JN7FAH
Frequency Display=KHZ+1
Time Format=hh:mm
Time Format Index=3
Grid Row Height=210
Grid Font Name=Slashed Zero Arial
Grid Forecolor=8388608
Grid Font Size=10

Any suggestion to fix this problem will be appreciated.

73 Ken JN7FAH

2020年3月18日(水) 10:24 Ken JN7FAH via Groups.Io <jn7fah=gmail.com@groups.io>:
Aki,
I fixed it
Thanks
73
Ken JN7FAH

2020年3月18日(水) 6:49 ja1nlx <ayoshida0205@...>:

Ken

Re-set Grid font. (View/Grid appearance/Grid font/color)

73

On 2020/03/17 22:21, Ken JN7FAH wrote:
Hello Aki,

L32 Ver3.50.410 automatically changed font in W/C window.
It seems like ugly Japanese Windows system font.
How can I change it as I like?

Ken JN7FAH

2020年3月17日(火) 8:02 ja1nlx <ayoshida0205@...>:
ver3.50.410 has been released.
New option added in W/C window menu to drag/drop W/C Window columns.


--
73 de aki
JA1NLX



--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX


Re: New option in W/C Window

Ken JN7FAH
 

吉田さん

View > Grid appearance > Show text in local character set
の設定に関連したバグがありますね。
私の場合,Grid fontに Slash Zero Arialを指定していて,それが
W/C窓に正しく反映されないというのが,元々のスレッドでしたが,
View > Grid appearance > Show text in local character set 
をオンにして日本語Windowsシステムフォントセット(MS ゴシック)に
変化させてから,本来はこの設定とは無関係のはずの,
View > Grid appearance > Show grid lines
をオン/オフするとそれに連動して,グリッドフォントがMSゴシック
になったり,Slash Zero Arialになったりします。
フォントコントロール関連ルーチンのバグですね。

これを書いていて,吉田さんのお返事
> メインフォーム下部のフォントはどうやっても日本語フォントですが、Logbook entry windowのフォントは
> 自由に設定できます。右クリック、Setup/Appearance


を拝見しました。以前は,このメニューでフォントをセットしても
再起動すると日本語Windowsシステムフォント(MSゴシック)に戻っ
ていたので,試していなかったのですが,ここまで来て,その頃は
View > Grid appearance > Show text in local character set
という設定が無かったことに気付きました。

そこで,いつもはSlash Zero ArialやMonacoを使うためにオフにし
ていた
View > Grid appearance > Show text in local character set
をオンにして,HAMゴシックを再インストールしてGrid fontとLogbook
entry窓のLabel fontをHAMゴシックに設定したところ再起動してもHAM
ゴシックのまま保たれることがわかりました。

ようするに,Logger32は未だに日本語Windowsで使うと英語フォント
を自由に使うことができないのだということのようです。

なぜ,3.50.409までは, 問題なくW/C窓のフォントに英語フォント
が使えていたのに3.50.410から再起動で日本語システムフォントに戻
るようになってしまったのかは,フォントコントロールルーチン周辺
のバグに由来するものと思われます。

HAMゴシックは,あまり好きでない・・・・とここまで書いて・・まて
よ吉田さんは,あの汚いHAMゴシックではなくてHAM フォントでしたね。

ということでHAMフォントに切り替えてみました。
そしたらやはり再起動するとWindowsシステムフォントに戻ってしまいます。
また振り出しです。

どうしたもんでしょね・・・
今日は,ここまでにしておきます。

また折を見て現象確認を続けたいと思います。

Ken JN7FAH
ex JA0RYN, JA0RYN/7, DL/JA0RYN


2020年3月23日(月) 18:37 ja1nlx <ayoshida0205@...>:

Yes I always use Japanese Windows 10.

Both data and label font are "HAM" (another slashed zero font)

When this happens? Since ver3.50.410 ?


73



On 2020/03/23 18:08, Ken JN7FAH wrote:
Aki,

>Try again with virgin Logger32.ini  (rename Logger32.ini to Logger32.ini.OLD)

I did it, but the font problem was not solved.
It always come back to the ugly font.

Are you using Japanese Windows?
I appreciate if you would show me your Logbook Entry Window.

73 Ken JN7FAH

2020年3月23日(月) 15:39 ja1nlx <ayoshida0205@...>:

I repeated closing/opening Logger32. It works here. This is HAM font.


On 2020/03/23 15:35, ja1nlx via Groups.Io wrote:

or copy Logger32.ini in Update files for ver3.50.xxx and paste it in Logger32 folder.

On 2020/03/23 15:31, ja1nlx via Groups.Io wrote:

Ken

I do not see this problem.

Try again with virgin Logger32.ini  (rename Logger32.ini to Logger32.ini.OLD)

73

On 2020/03/23 15:23, Ken JN7FAH wrote:
Aki,
I have experienced this problem on two different PCs
running Windows 7 and 10, respectively.
I uploaded video to explain what's the problem on 
Logger32 Ver. 3.50.410 running under Japanese Windows
to youtube: 
 
73 Ken JN7FAH


2020年3月23日(月) 10:53 ja1nlx <ayoshida0205@...>:

Ken

I tried this with no problem.

Once Slashed zero Arial set as Grid font it stay in W/C window after closing/opening Logger32.


On 2020/03/23 10:28, Ken JN7FAH wrote:
Aki,
The problem of W/C window has relapsed.
Once it solved by reset font to "Slashed Zero Arial"  as seen in the next image.
image.png
However, once I quit and restart L32 Ver3.50.410,  the ugly
font problem relapse as seen in the next image 
image.png

Corresponding lines in my INI file is as follows.
[WndWorkedConfirmed Settings]
Column 0 Width=495
Column 1 Width=465
Column 2 Width=405
Column 3 Width=405
Column 4 Width=105
Complex Display=False
Consolidate DIGital=True
Selected Band=11927551
Consolidate PHOne=False
Include LoTW=True
Include eQSL=False
Include QSL=False
Current Operator Only=False
[Globals]
Operator=JN7FAH
Frequency Display=KHZ+1
Time Format=hh:mm
Time Format Index=3
Grid Row Height=210
Grid Font Name=Slashed Zero Arial
Grid Forecolor=8388608
Grid Font Size=10

Any suggestion to fix this problem will be appreciated.

73 Ken JN7FAH

2020年3月18日(水) 10:24 Ken JN7FAH via Groups.Io <jn7fah=gmail.com@groups.io>:
Aki,
I fixed it
Thanks
73
Ken JN7FAH

2020年3月18日(水) 6:49 ja1nlx <ayoshida0205@...>:

Ken

Re-set Grid font. (View/Grid appearance/Grid font/color)

73

On 2020/03/17 22:21, Ken JN7FAH wrote:
Hello Aki,

L32 Ver3.50.410 automatically changed font in W/C window.
It seems like ugly Japanese Windows system font.
How can I change it as I like?

Ken JN7FAH

2020年3月17日(火) 8:02 ja1nlx <ayoshida0205@...>:
ver3.50.410 has been released.
New option added in W/C window menu to drag/drop W/C Window columns.


--
73 de aki
JA1NLX



--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX


Re: New option in W/C Window

ja1nlx
 

Yes I always use Japanese Windows 10.

Both data and label font are "HAM" (another slashed zero font)

When this happens? Since ver3.50.410 ?


73



On 2020/03/23 18:08, Ken JN7FAH wrote:
Aki,

>Try again with virgin Logger32.ini  (rename Logger32.ini to Logger32.ini.OLD)

I did it, but the font problem was not solved.
It always come back to the ugly font.

Are you using Japanese Windows?
I appreciate if you would show me your Logbook Entry Window.

73 Ken JN7FAH

2020年3月23日(月) 15:39 ja1nlx <ayoshida0205@...>:

I repeated closing/opening Logger32. It works here. This is HAM font.


On 2020/03/23 15:35, ja1nlx via Groups.Io wrote:

or copy Logger32.ini in Update files for ver3.50.xxx and paste it in Logger32 folder.

On 2020/03/23 15:31, ja1nlx via Groups.Io wrote:

Ken

I do not see this problem.

Try again with virgin Logger32.ini  (rename Logger32.ini to Logger32.ini.OLD)

73

On 2020/03/23 15:23, Ken JN7FAH wrote:
Aki,
I have experienced this problem on two different PCs
running Windows 7 and 10, respectively.
I uploaded video to explain what's the problem on 
Logger32 Ver. 3.50.410 running under Japanese Windows
to youtube: 
 
73 Ken JN7FAH


2020年3月23日(月) 10:53 ja1nlx <ayoshida0205@...>:

Ken

I tried this with no problem.

Once Slashed zero Arial set as Grid font it stay in W/C window after closing/opening Logger32.


On 2020/03/23 10:28, Ken JN7FAH wrote:
Aki,
The problem of W/C window has relapsed.
Once it solved by reset font to "Slashed Zero Arial"  as seen in the next image.
image.png
However, once I quit and restart L32 Ver3.50.410,  the ugly
font problem relapse as seen in the next image 
image.png

Corresponding lines in my INI file is as follows.
[WndWorkedConfirmed Settings]
Column 0 Width=495
Column 1 Width=465
Column 2 Width=405
Column 3 Width=405
Column 4 Width=105
Complex Display=False
Consolidate DIGital=True
Selected Band=11927551
Consolidate PHOne=False
Include LoTW=True
Include eQSL=False
Include QSL=False
Current Operator Only=False
[Globals]
Operator=JN7FAH
Frequency Display=KHZ+1
Time Format=hh:mm
Time Format Index=3
Grid Row Height=210
Grid Font Name=Slashed Zero Arial
Grid Forecolor=8388608
Grid Font Size=10

Any suggestion to fix this problem will be appreciated.

73 Ken JN7FAH

2020年3月18日(水) 10:24 Ken JN7FAH via Groups.Io <jn7fah=gmail.com@groups.io>:
Aki,
I fixed it
Thanks
73
Ken JN7FAH

2020年3月18日(水) 6:49 ja1nlx <ayoshida0205@...>:

Ken

Re-set Grid font. (View/Grid appearance/Grid font/color)

73

On 2020/03/17 22:21, Ken JN7FAH wrote:
Hello Aki,

L32 Ver3.50.410 automatically changed font in W/C window.
It seems like ugly Japanese Windows system font.
How can I change it as I like?

Ken JN7FAH

2020年3月17日(火) 8:02 ja1nlx <ayoshida0205@...>:
ver3.50.410 has been released.
New option added in W/C window menu to drag/drop W/C Window columns.


--
73 de aki
JA1NLX



--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX


Re: New option in W/C Window

Ken JN7FAH
 

Aki,

>Try again with virgin Logger32.ini  (rename Logger32.ini to Logger32.ini.OLD)

I did it, but the font problem was not solved.
It always come back to the ugly font.

Are you using Japanese Windows?
I appreciate if you would show me your Logbook Entry Window.

73 Ken JN7FAH

2020年3月23日(月) 15:39 ja1nlx <ayoshida0205@...>:

I repeated closing/opening Logger32. It works here. This is HAM font.


On 2020/03/23 15:35, ja1nlx via Groups.Io wrote:

or copy Logger32.ini in Update files for ver3.50.xxx and paste it in Logger32 folder.

On 2020/03/23 15:31, ja1nlx via Groups.Io wrote:

Ken

I do not see this problem.

Try again with virgin Logger32.ini  (rename Logger32.ini to Logger32.ini.OLD)

73

On 2020/03/23 15:23, Ken JN7FAH wrote:
Aki,
I have experienced this problem on two different PCs
running Windows 7 and 10, respectively.
I uploaded video to explain what's the problem on 
Logger32 Ver. 3.50.410 running under Japanese Windows
to youtube: 
 
73 Ken JN7FAH


2020年3月23日(月) 10:53 ja1nlx <ayoshida0205@...>:

Ken

I tried this with no problem.

Once Slashed zero Arial set as Grid font it stay in W/C window after closing/opening Logger32.


On 2020/03/23 10:28, Ken JN7FAH wrote:
Aki,
The problem of W/C window has relapsed.
Once it solved by reset font to "Slashed Zero Arial"  as seen in the next image.
image.png
However, once I quit and restart L32 Ver3.50.410,  the ugly
font problem relapse as seen in the next image 
image.png

Corresponding lines in my INI file is as follows.
[WndWorkedConfirmed Settings]
Column 0 Width=495
Column 1 Width=465
Column 2 Width=405
Column 3 Width=405
Column 4 Width=105
Complex Display=False
Consolidate DIGital=True
Selected Band=11927551
Consolidate PHOne=False
Include LoTW=True
Include eQSL=False
Include QSL=False
Current Operator Only=False
[Globals]
Operator=JN7FAH
Frequency Display=KHZ+1
Time Format=hh:mm
Time Format Index=3
Grid Row Height=210
Grid Font Name=Slashed Zero Arial
Grid Forecolor=8388608
Grid Font Size=10

Any suggestion to fix this problem will be appreciated.

73 Ken JN7FAH

2020年3月18日(水) 10:24 Ken JN7FAH via Groups.Io <jn7fah=gmail.com@groups.io>:
Aki,
I fixed it
Thanks
73
Ken JN7FAH

2020年3月18日(水) 6:49 ja1nlx <ayoshida0205@...>:

Ken

Re-set Grid font. (View/Grid appearance/Grid font/color)

73

On 2020/03/17 22:21, Ken JN7FAH wrote:
Hello Aki,

L32 Ver3.50.410 automatically changed font in W/C window.
It seems like ugly Japanese Windows system font.
How can I change it as I like?

Ken JN7FAH

2020年3月17日(火) 8:02 ja1nlx <ayoshida0205@...>:
ver3.50.410 has been released.
New option added in W/C window menu to drag/drop W/C Window columns.


--
73 de aki
JA1NLX



--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX
--
73 de aki
JA1NLX

4981 - 5000 of 84215