Date   

Re: Logbook colors

Bob
 

There's a section in the Help file entitled Highlight QSL Status. SeventyThree(s).

On January 12, 2020 at 9:40 AM Marvin Stern <marbern@...> wrote:

How can flag my logbook colors to indicate QSL received and sent both in paper and LOTW qsl's?
Marv, W2AOC

 


Display State names

Marvin Stern <marbern@...>
 

When downloading LOTW received QSL's, how can Logger32 print state names in the State column instead of leaving it blank.
I'm mainly interested in files received from WSJT files which only contain grids, not names.
Marv, W2AOC


Logbook colors

Marvin Stern <marbern@...>
 

How can flag my logbook colors to indicate QSL received and sent both in paper and LOTW qsl's?
Marv, W2AOC


HamCap

Rob
 

Hi,

 

I keep getting

 

Error 134 File already in use

 

004501d0 READANT [+0970]

00405b30 ANTCALC [+0dd3]

00401000 main [+17da]

 

with HamCap.

 

Have reinstalled both hamcap and voacap but still the same

 

(I have updated the SSN file)

 

Help!

 

Rob

 

Am using Window10

 

Rob Harrison

Principal Consultant

 

MIS Specialists, Green Lane House, Whixall, Shropshire, SY13 2PT.

M: 07826 958358

E: rob.harrison@...

 

http://www.mis-specialists.co.uk

 

Interim Management and Specialist MIS/IT Consultancy for Colleges of Further Education

_________________________________________________________________________________________________

 

MIS Specialists is a limited company registered in England and Wales. Registered number: 07459892.

Registered Office: Green Lane House, Whixall, Shropshire, SY13 2PT.

 

This e-mail and any attachments are not guaranteed to be free from viruses, and are for the intended addressee(s) only

and may contain confidential and/or privileged material, so if you are not a named or intended addressee, do not use,

retain or disclose such information. 

P Consider the environment. Please don't print this e-mail unless you really need to.

 


Re: Exporting Log (ADIF) Partial Only FT8

Bob
 

... and my message said  Could it be you don't have FT8 anywhere in your BandPlan (Click TOOLS | SETUP BANDS & MODES) ... Villis message pointed you in the same direction ... You can lead a camel to water, but the only way you can make it drink is with two bricks. SeventyThree(s).

On January 11, 2020 at 4:27 PM "Gregg E via Groups.Io" <w5idx@...> wrote:

 
I don't have FT8 in the Modes Window as an option.
Gregg



On Saturday, January 11, 2020, 03:18:12 PM CST, Bob <k4cy@...> wrote:


No option to export FT8 QSOs? Could it be you don't have FT8 anywhere in your BandPlan (Click TOOLS | SETUP BANDS & MODES) SeventyThree(s).


On January 11, 2020 at 3:48 PM "Gregg E via Groups.Io" <w5idx@...> wrote:

OK, I need to export my Log with only the FT8 Contacts.
I need to merge my previously worked stations into the WSJT-X Log
When I check the box to export partial log there is no option to choose FT8?
Where do I need to go to set that up as an option?

Thanks
Gregg
W5IDX


 
 

 


Re: Exporting Log (ADIF) Partial Only FT8

Gregg E
 

Villi, That's what I needed it's not in there.   
FT8 is missing in the bands and modes. Thanks
Gregg
W5IDX
  


On Saturday, January 11, 2020, 03:13:21 PM CST, Vilhjalmur Sigurjonsson <vilhj@...> wrote:


This is no problem for me, I can choose bands and modes. Have you defined FT8 in your „Edit Bands and Modes“ (in Tools)?

73 Villi
TF3VS

 

Frá: hamlogger@groups.io <hamlogger@groups.io> Fyrir hönd Gregg E via Groups.Io
Sent: laugardagur, 11. janúar 2020 20:49
Til: Hamlogger <hamlogger@groups.io>
Efni: [hamlogger] Exporting Log (ADIF) Partial Only FT8

 

OK, I need to export my Log with only the FT8 Contacts.

I need to merge my previously worked stations into the WSJT-X Log

When I check the box to export partial log there is no option to choose FT8?

Where do I need to go to set that up as an option?

 

Thanks

Gregg

W5IDX

 


Re: Exporting Log (ADIF) Partial Only FT8

Gregg E
 

I don't have FT8 in the Modes Window as an option.
Gregg



On Saturday, January 11, 2020, 03:18:12 PM CST, Bob <k4cy@...> wrote:


No option to export FT8 QSOs? Could it be you don't have FT8 anywhere in your BandPlan (Click TOOLS | SETUP BANDS & MODES) SeventyThree(s).


On January 11, 2020 at 3:48 PM "Gregg E via Groups.Io" <w5idx@...> wrote:

OK, I need to export my Log with only the FT8 Contacts.
I need to merge my previously worked stations into the WSJT-X Log
When I check the box to export partial log there is no option to choose FT8?
Where do I need to go to set that up as an option?

Thanks
Gregg
W5IDX


 


Re: Exporting Log (ADIF) Partial Only FT8

Bob
 

No option to export FT8 QSOs? Could it be you don't have FT8 anywhere in your BandPlan (Click TOOLS | SETUP BANDS & MODES) SeventyThree(s).


On January 11, 2020 at 3:48 PM "Gregg E via Groups.Io" <w5idx@...> wrote:

OK, I need to export my Log with only the FT8 Contacts.
I need to merge my previously worked stations into the WSJT-X Log
When I check the box to export partial log there is no option to choose FT8?
Where do I need to go to set that up as an option?

Thanks
Gregg
W5IDX


 


Re: Exporting Log (ADIF) Partial Only FT8

Jim Hargrave
 

Greg,

Select: Files > Export logs > ADIF > select Partial log > Include These MODEs.

 

Jim – w5ifp-

 

From: hamlogger@groups.io [mailto:hamlogger@groups.io] On Behalf Of Gregg E via Groups.Io
Sent: Saturday, January 11, 2020 2:49 PM
To: Hamlogger <hamlogger@groups.io>
Subject: [hamlogger] Exporting Log (ADIF) Partial Only FT8

 

OK, I need to export my Log with only the FT8 Contacts.

I need to merge my previously worked stations into the WSJT-X Log

When I check the box to export partial log there is no option to choose FT8?

Where do I need to go to set that up as an option?

 

Thanks

Gregg

W5IDX

 


Re: Exporting Log (ADIF) Partial Only FT8

Vilhjalmur Sigurjonsson
 

This is no problem for me, I can choose bands and modes. Have you defined FT8 in your „Edit Bands and Modes“ (in Tools)?

73 Villi
TF3VS

 

Frá: hamlogger@groups.io <hamlogger@groups.io> Fyrir hönd Gregg E via Groups.Io
Sent: laugardagur, 11. janúar 2020 20:49
Til: Hamlogger <hamlogger@groups.io>
Efni: [hamlogger] Exporting Log (ADIF) Partial Only FT8

 

OK, I need to export my Log with only the FT8 Contacts.

I need to merge my previously worked stations into the WSJT-X Log

When I check the box to export partial log there is no option to choose FT8?

Where do I need to go to set that up as an option?

 

Thanks

Gregg

W5IDX

 


Exporting Log (ADIF) Partial Only FT8

Gregg E
 

OK, I need to export my Log with only the FT8 Contacts.
I need to merge my previously worked stations into the WSJT-X Log
When I check the box to export partial log there is no option to choose FT8?
Where do I need to go to set that up as an option?

Thanks
Gregg
W5IDX


Re: [DXLab] RadioInfo UDP Packet - Proposal - <app> element to identify source

Dave AA6YQ
 

+ AA6YQ comments below

We are planning on adding the <app> tag to all our XML messages. This will allow a consuming app to know what app they are talking to, thus if an app is only supposed to control a rotor for N1MM+, it can do that.

+ That's fine.

The whole purpose of XML is standardization, but also to allow extension. If another application is in need of a data element not in the standard, and one we are not willing to add, then it can be ignored by consumers who don't need it.

+ Are you willing to include data elements not supported by N1MM+ in the documentation, assuming you are appropriately informed?

Regarding frequency down to the Hz level, I have not yet heard a requirement for that. When/if it needs to be added, I am inclined to add it as a new element as an integer number of Hz as opposed to integer number of tens of Hz. SDRs controlled by extio use integer Hz to set frequency. It would be a new element to prevent all consumers from needing to handle both the current and the new format. They consumer could chose what to support without the need to coordinate with the sender.

+ Sounds good.

73,

Dave, AA6YQ


Re: [DXLab] RadioInfo UDP Packet - Proposal - <app> element to identify source

Dave AA6YQ
 

+ AA6YQ comments below

I would like to propose a small change to the RadioInfo XML Document UDP packet that broadcasts the status of the radios being controlled by logging software.

Add an element to the RadioInfo packet:
<app>N1MM</app>
<app>DXLAB</app>
<app>Logger32</app>
Etc…

The W1TR HFAUTO software that controls the Palstar HF-AUTO ATU uses these broadcasts to preset the L/C tuning solution in the ATU (long story, some other time).
I’m guessing that there many other APPs out there that use this information for various purposes.

The complete syntax and semantics of the information in the RadioInfo packet varies depending on its source.
It would be unreasonable to require standardization of this XML Document…

+ Exactly why would it be unreasonable to maintain a standard format used by all applications? I'm happy to make any changes in DXLab applications required to do that..


But… inclusion of the <app> element would make it easier for 3rd party software using this to properly decode it and identify its source.

+ If you make it easy to introduce gratuitous differences, guess what will happen.


Logger32 has a clever solution for providing the 1 HZ digit… <Freq>1416350.3</Freq> Use a decimal point and additional digit to get 14.163.503 as a frequency.
Too bad that N1MM chose 10 Hz as the frequency resolution, but that ship has sailed.

+ Two decimal points in a number is "clever"? Why not add 3 or 4 more and be "brilliant"? Or switch to hex, that will be even less readily understandable.

+ When I'm telling war stories about the ridiculous "variances" encountered when importing ADIF files from various applications, "frequencies that contain two decimal points" always gets a big laugh. Let's not standardize this nonsense.


At least applications broadcast RadioInfo UDP packets:
1) N1MM / N1MM+
2) DXLAB
3) Logger32

I also broadcast UDP packets from FLDIGI_UDP and W1TR Rig Control, but use a different XML Document Name.
With the use of the <app> element, I could change those to RadioInfo as well.

+ As far as I'm concerned, the N1MM team should continue owning and maintaining the XML specifications; I'm happy to keep following their lead. If there's a need for more precise frequency resolution, ask them to consider providing it.

73,

Dave, AA6YQ


RadioInfo UDP Packet - Proposal - <app> element to identify source

Terry Glagowski / W1TR / AFA1DI
 

I would like to propose a small change to the RadioInfo XML Document UDP packet that broadcasts the status of the radios being controlled by logging software.

 

Add an element to the RadioInfo packet:

<app>N1MM</app>

<app>DXLAB</app>

<app>Logger32</app>

Etc

 

The W1TR HFAUTO software that controls the Palstar HF-AUTO ATU uses these broadcasts to preset the L/C tuning solution in the ATU (long story, some other time).

I’m guessing that there many other APPs out there that use this information for various purposes.

 

The complete syntax and semantics of the information in the RadioInfo packet varies depending on its source.

It would be unreasonable to require standardization of this XML Document…

But… inclusion of the <app> element would make it easier for 3rd party software using this to properly decode it and identify its source.

 

Logger32 has a clever solution for providing the 1 HZ digit…

<Freq>1416350.3</Freq>

Use a decimal point and additional digit to get 14.163.503 as a frequency.

Too bad that N1MM chose 10 Hz as the frequency resolution, but that ship has sailed.

 

At least applications broadcast RadioInfo UDP packets:

1)      N1MM / N1MM+

2)      DXLAB

3)      Logger32

 

I also broadcast UDP packets from FLDIGI_UDP and W1TR Rig Control, but use a different XML Document Name.

With the use of the <app> element, I could change those to RadioInfo as well.

 

Terry G. Glagowski / W1TR
HAM: W1TR / USAF MARS: AFA1DI / GRID: FN31vw / ELEV: 950 MSL / 41.924750 N, 72.190320 W.


25 Hnath Road, Ashford, CT 06278 .
(860) 429-9444 (Landline) .
(860) 617-1969 (Cell) .

(EMail) W1TR@... .
(Web)  http://www.Glagowski.org/Radio .


Re: cherry picking

Paul F6EXV
 

CQ DX CQ DX OUTSIDE EUROPE DE XX0XX
BRRRRRRRAAAARRRRARARARA
THE G3 STATION, COME AGAIN

Le 11/01/2020 à 13:39, Bob a écrit :
2300? News to me Phil, but plenty of time to get an auto-update
released. And, I just went on-line to submit my vote for the
celebratory Big Ben chimes. To show my full support for the Duke and
Duchess of Sussex, I voted for 'Oh Canada'. SeventyThree(s) and thanks
for the correction.
On January 11, 2020 at 3:08 AM "Philip (G4OBK) Catterall"
<cq@yorkshirewalker.co.uk> wrote:

Bob – Please make sure the start time for the Logger32 Brexit
re-configuration for UK stations is at 2300z on 31^st January, which
is the official time we withdraw from the EU and when the Brexiteers
want Big Ben to have a special chime. The specially minted 50p pieces
come out the next day.

73 Phil


Re: cherry picking

Bob
 

2300? News to me Phil, but plenty of time to get an auto-update released. And, I just went on-line to submit my vote for the celebratory Big Ben chimes. To show my full support for the Duke and Duchess of Sussex, I voted for 'Oh Canada'. SeventyThree(s) and thanks for the correction.

On January 11, 2020 at 3:08 AM "Philip (G4OBK) Catterall" <cq@...> wrote:

Bob – Please make sure the start time for the Logger32 Brexit re-configuration for UK stations is at 2300z on 31st January, which is the official time we withdraw from the EU and when the Brexiteers want Big Ben to have a special chime. The specially minted 50p pieces come out the next day.

73 Phil

 


 


Re: cherry picking

Philip (G4OBK) Catterall
 

Bob – Please make sure the start time for the Logger32 Brexit re-configuration for UK stations is at 2300z on 31st January, which is the official time we withdraw from the EU and when the Brexiteers want Big Ben to have a special chime. The specially minted 50p pieces come out the next day.

73 Phil

 


Re: FW: Logger32 Split Operation? HFAUTO

Mike
 

I think I missed the beginning of this thread somewhere along the way. 


New file uploaded to hamlogger@groups.io

hamlogger@groups.io Notification <hamlogger+notification@...>
 

Hello,

This email message is a notification to let you know that the following files have been uploaded to the Files area of the hamlogger@groups.io group.

Uploaded By: Dave Colliau <n8dc-8@...>

Description:
This is the file I created a year os so ago with the commands for the 7610 for rig setup and Dxspot commands. Any comments ,suggestions or bug reports are appreciated.

Cheers,
The Groups.io Team


Re: IC7610 is not changing modes

Dave Colliau
 

No problem. I havent looked at this file in a while so if there are any errors let me know. I had fun creating that and the CI-V commands for the RCP when I had my 7610. I do still have a 7300 but my main rig is a FTDX5k. Were going to need a boat here for the weather coming and possibly ice also. Since the WX is going down the tubes I will be around all weekend if you need anything. I might accidentally get some work done in the shack :) 
73
Dave N8DC

On January 10, 2020 at 8:16 AM Chuck Kraly K0XM <ckraly@...> wrote:

AWESOME Dave, thanks for this. I am sure it is something simple I am missing. I will play with it when I am off work and if power stays in this weekend, I will finish. They are talking Ice Storm here starting today.  This and my CW Skimmer which will eventually be in Tanzania later is priority in my shack time.


On Fri, Jan 10, 2020 at 7:02 AM Dave Colliau < n8dc-8@...> wrote:
Ok found my file and emailed it to you Chuck. As far as the RCP goes there are endless possibilities for macro commands . I remember I had a ton setup in Logger 32 for my 7610. If you look at the CI-V command manual and figure out how everything works the possibilities are endless. If I can be of any help just shoot me an email.
73
Dave N8DC
On January 9, 2020 at 8:27 PM Chuck Kraly K0XM < ckraly@...> wrote:

UPDATE:
I loaded the 7610 RCP and was trying to set things up. I see that a click on a packet cluster spot sends the radio thee in frequency and mode, and then it immediately changes back to the mode it was in which I had set manually earlier.
Just as a side note, I am only experiencing this with Logger32 and I have other programs for testing but using L32 for all my logging as my main program.

 

 

 


 

4301 - 4320 of 82850