Date   

Re: Poblem on Clublog

Bob
 

Merde! If you look at the QSO in the Logbook Entry, What is the DXCC for the QSO? I suspect the problem is none of the three programs. It is probably the operator. SeventyThree(s).

On January 5, 2020 at 6:45 AM Paul F6EXV <f6exv@hotmail.com> wrote:


Hi all
I am sending this email to the 3 forums, as I am very unsure which
program is "responsible" of the following.
I logged a few QSO in CW on DXLog (CW, DXpedition mode). I exported that
log to an adif file, and imported that file into Logger32. Logger32 then
automatically uploaded these QSO onto Clublog.
The upload went fine, BUT the country is indicated as "invalid".

Any idea which program is responsible, and how to solve that ?
Thanks + 73
Paul F6EXV



Re: QSO TIME

Charles
 

Paul,
         You can also set up the other user fields in the Log Entry Window and edit those during the Qso (or before the Qso has ended) which is very useful too.

73

Charles

Charles Wilmott (MØOXO)
60 Church Hill, 
Royston, Barnsley,
South Yorkshire, S71 4NG
England, 
United Kingdom

Tel ; (+44) 7900 500775


The information in this internet email is copyright of Charles Wilmott, confidential and is intended solely for the addressee(s). Any views expressed in this e-mail are those of Charles Wilmott only, except where the sender specifically states these to be his own views. Access, copying, dissemination to or re-use of information in it to or by anyone else is unauthorised.


On Sun, 5 Jan 2020, 11:56 Bob, <k4cy@...> wrote:
No, you can edit the Logbook Entry Window as much as you like BEFORE you add the QSO to the logbook. If your QTH is Marseilles, then I can change your name to AbdulRahman, or AbuBooBoo, or whatever they call themselves down there under the palm trees. I can even change the name to Paul before I log the QSO. SeventyThree(s).

> On January 5, 2020 at 6:34 AM Paul F6EXV <f6exv@...> wrote:
>
>
> Hi
> In other words, I need to log a QSO, then edit it and modify whatever I
> need/want to change ?
> Can I edit all the fields BEFORE logging ?
> Thanks + 73
> Paul F6EXV
>
> Le 05/01/2020 à 11:30, Bob a écrit :
> > Like this?
> >
> >
> >
> > When you type <ENTER> this is what is entered into the Logbook. /ti
> > change/set the QSO Start time type CTRL+S. The help file is more than
> > 400 pages, I recommend you read it. SeventyThree(s).
> >
> > PS. To download the current Help File, Google GITHUB LOGGER32.
> >
> >> On January 5, 2020 at 5:17 AM Paul F6EXV < f6exv@...
> >> <mailto:f6exv@...>> wrote:
> >>
> >>
> >> Hi all
> >> I am trying to see if it is possible to modify any field of the logging
> >> windows BEFORE the QSO is actually logged ?
> >> For example, how to I add an IOTA reference, how do I modify the time,
> >> how do I add/modify a QSL manager, again, BEFORE the QSO is actually
> >> logged.
> >> If I have to log it first, and then edit the QSO to modify field(s), it
> >> will have already be uploaded to ClubLog and/or LoTW. This is what I do
> >> not want to happen.
> >>
> >> Thanks for help
> >> 73
> >> Paul F6EXV
> >>
> >
>
>
>
>




Re: QSO TIME

Bob
 

No, you can edit the Logbook Entry Window as much as you like BEFORE you add the QSO to the logbook. If your QTH is Marseilles, then I can change your name to AbdulRahman, or AbuBooBoo, or whatever they call themselves down there under the palm trees. I can even change the name to Paul before I log the QSO. SeventyThree(s).

On January 5, 2020 at 6:34 AM Paul F6EXV <f6exv@hotmail.com> wrote:


Hi
In other words, I need to log a QSO, then edit it and modify whatever I
need/want to change ?
Can I edit all the fields BEFORE logging ?
Thanks + 73
Paul F6EXV

Le 05/01/2020 à 11:30, Bob a écrit :
Like this?



When you type <ENTER> this is what is entered into the Logbook. /ti
change/set the QSO Start time type CTRL+S. The help file is more than
400 pages, I recommend you read it. SeventyThree(s).

PS. To download the current Help File, Google GITHUB LOGGER32.

On January 5, 2020 at 5:17 AM Paul F6EXV < f6exv@hotmail.com
<mailto:f6exv@hotmail.com>> wrote:


Hi all
I am trying to see if it is possible to modify any field of the logging
windows BEFORE the QSO is actually logged ?
For example, how to I add an IOTA reference, how do I modify the time,
how do I add/modify a QSL manager, again, BEFORE the QSO is actually
logged.
If I have to log it first, and then edit the QSO to modify field(s), it
will have already be uploaded to ClubLog and/or LoTW. This is what I do
not want to happen.

Thanks for help
73
Paul F6EXV



Re: QSO TIME

ja1nlx
 

Paul

Before logging QSO (I mean before you hit Enter-key) you can change everything

you see in Logbook entry window.

After logging QSO you can change everything you see in Logbook page window.

73

On 2020/01/05 20:34, Paul F6EXV wrote:
Hi
In other words, I need to log a QSO, then edit it and modify whatever I
need/want to change ?
Can I edit all the fields BEFORE logging ?
Thanks + 73
Paul F6EXV

Le 05/01/2020 à 11:30, Bob a écrit :
Like this?



When you type <ENTER> this is what is entered into the Logbook. /ti
change/set the QSO Start time type CTRL+S. The help file is more than
400 pages, I recommend you read it. SeventyThree(s).

PS. To download the current Help File, Google GITHUB LOGGER32.

On January 5, 2020 at 5:17 AM Paul F6EXV < f6exv@hotmail.com
<mailto:f6exv@hotmail.com>> wrote:


Hi all
I am trying to see if it is possible to modify any field of the logging
windows BEFORE the QSO is actually logged ?
For example, how to I add an IOTA reference, how do I modify the time,
how do I add/modify a QSL manager, again, BEFORE the QSO is actually
logged.
If I have to log it first, and then edit the QSO to modify field(s), it
will have already be uploaded to ClubLog and/or LoTW. This is what I do
not want to happen.

Thanks for help
73
Paul F6EXV
--
73 de aki
JA1NLX


Poblem on Clublog

Paul F6EXV
 

Hi all
I am sending this email to the 3 forums, as I am very unsure which
program is "responsible" of the following.
I logged a few QSO in CW on DXLog (CW, DXpedition mode). I exported that
log to an adif file, and imported that file into Logger32. Logger32 then
automatically uploaded these QSO onto Clublog.
The upload went fine, BUT the country is indicated as "invalid".

Any idea which program is responsible, and how to solve that ?
Thanks + 73
Paul F6EXV


Re: QSO TIME

Paul F6EXV
 

Hi
In other words, I need to log a QSO, then edit it and modify whatever I
need/want to change ?
Can I edit all the fields BEFORE logging ?
Thanks + 73
Paul F6EXV

Le 05/01/2020 à 11:30, Bob a écrit :
Like this?



When you type <ENTER> this is what is entered into the Logbook. /ti
change/set the QSO Start time type CTRL+S. The help file is more than
400 pages, I recommend you read it. SeventyThree(s).

PS. To download the current Help File, Google GITHUB LOGGER32.

On January 5, 2020 at 5:17 AM Paul F6EXV < f6exv@hotmail.com
<mailto:f6exv@hotmail.com>> wrote:


Hi all
I am trying to see if it is possible to modify any field of the logging
windows BEFORE the QSO is actually logged ?
For example, how to I add an IOTA reference, how do I modify the time,
how do I add/modify a QSL manager, again, BEFORE the QSO is actually
logged.
If I have to log it first, and then edit the QSO to modify field(s), it
will have already be uploaded to ClubLog and/or LoTW. This is what I do
not want to happen.

Thanks for help
73
Paul F6EXV


Re: Logger32 RadioInfo UDP Broadcasts

Bob
 

... and I don't have a radio with CAT control, but I simulated a VFO frequency change to 14001.234 kHz. This is broadcast:

<?xml version="1.0"?>
<RadioInfo>
<Freq>1400123.4</Freq>
</RadioInfo>

Simulated a frequency change to 14123 kHz. This is broadcast:

<?xml version="1.0"?>
<RadioInfo>
<Freq>1412300</Freq>
</RadioInfo>

SeventyThree(s)/



On January 5, 2020 at 5:48 AM Bob <k4cy@...> wrote:

... to setup/enable UDP Broadcast of frequency in Logger32, click SETUP | FREQUENCY and check the UDP Broadcast option. Period. That's it. No port setup, no nothing, just turn it on. SeventyThree(s).
On January 4, 2020 at 9:34 PM Bob <k4cy@...> wrote:

There's a section UDP Broadcast of DX Spots in the Logger32 Help file. SeventyThree(s).
On January 4, 2020 at 9:18 PM Terry Glagowski / W1TR / AFA1DI <W1TR@...> wrote:

Does anyone have info about UDP broadcasts from Logger32 to other APPs?

Just a topic name or location in the documentation would help.

 

Terry G. Glagowski / W1TR
HAM: W1TR / USAF MARS: AFA1DI / GRID: FN31vw / ELEV: 950 MSL / 41.924750 N, 72.190320 W.


25 Hnath Road, Ashford, CT 06278 .
(860) 429-9444 (Landline) .
(860) 617-1969 (Cell) .

(EMail) W1TR@... .
(Web)  http://www.Glagowski.org/Radio .

 


 

 

 


Re: Logger32 RadioInfo UDP Broadcasts

Bob
 

... to setup/enable UDP Broadcast of frequency in Logger32, click SETUP | FREQUENCY and check the UDP Broadcast option. Period. That's it. No port setup, no nothing, just turn it on. SeventyThree(s).

On January 4, 2020 at 9:34 PM Bob <k4cy@...> wrote:

There's a section UDP Broadcast of DX Spots in the Logger32 Help file. SeventyThree(s).
On January 4, 2020 at 9:18 PM Terry Glagowski / W1TR / AFA1DI <W1TR@...> wrote:

Does anyone have info about UDP broadcasts from Logger32 to other APPs?

Just a topic name or location in the documentation would help.

 

Terry G. Glagowski / W1TR
HAM: W1TR / USAF MARS: AFA1DI / GRID: FN31vw / ELEV: 950 MSL / 41.924750 N, 72.190320 W.


25 Hnath Road, Ashford, CT 06278 .
(860) 429-9444 (Landline) .
(860) 617-1969 (Cell) .

(EMail) W1TR@... .
(Web)  http://www.Glagowski.org/Radio .

 


 

 


Re: QSO TIME

Bob
 

Like this?



When you type <ENTER> this is what is entered into the Logbook. /ti change/set the QSO Start time type CTRL+S. The help file is more than 400 pages, I recommend you read it. SeventyThree(s).

PS. To download the current Help File, Google GITHUB LOGGER32.

On January 5, 2020 at 5:17 AM Paul F6EXV < f6exv@...> wrote:


Hi all
I am trying to see if it is possible to modify any field of the logging
windows BEFORE the QSO is actually logged ?
For example, how to I add an IOTA reference, how do I modify the time,
how do I add/modify a QSL manager, again, BEFORE the QSO is actually logged.
If I have to log it first, and then edit the QSO to modify field(s), it
will have already be uploaded to ClubLog and/or LoTW. This is what I do
not want to happen.

Thanks for help
73
Paul F6EXV


QSO TIME

Paul F6EXV
 

Hi all
I am trying to see if it is possible to modify any field of the logging
windows BEFORE the QSO is actually logged ?
For example, how to I add an IOTA reference, how do I modify the time,
how do I add/modify a QSL manager, again, BEFORE the QSO is actually logged.
If I have to log it first, and then edit the QSO to modify field(s), it
will have already be uploaded to ClubLog and/or LoTW. This is what I do
not want to happen.

Thanks for help
73
Paul F6EXV


Re: Logger32 RadioInfo UDP Broadcasts

Bob
 

There's a section UDP Broadcast of DX Spots in the Logger32 Help file. SeventyThree(s).

On January 4, 2020 at 9:18 PM Terry Glagowski / W1TR / AFA1DI <W1TR@...> wrote:

Does anyone have info about UDP broadcasts from Logger32 to other APPs?

Just a topic name or location in the documentation would help.

 

Terry G. Glagowski / W1TR
HAM: W1TR / USAF MARS: AFA1DI / GRID: FN31vw / ELEV: 950 MSL / 41.924750 N, 72.190320 W.


25 Hnath Road, Ashford, CT 06278 .
(860) 429-9444 (Landline) .
(860) 617-1969 (Cell) .

(EMail) W1TR@... .
(Web)  http://www.Glagowski.org/Radio .

 


 


Re: Logger32 RadioInfo UDP Broadcasts

Terry Glagowski / W1TR / AFA1DI
 

Does anyone have info about UDP broadcasts from Logger32 to other APPs?

Just a topic name or location in the documentation would help.

 

Terry G. Glagowski / W1TR
HAM: W1TR / USAF MARS: AFA1DI / GRID: FN31vw / ELEV: 950 MSL / 41.924750 N, 72.190320 W.


25 Hnath Road, Ashford, CT 06278 .
(860) 429-9444 (Landline) .
(860) 617-1969 (Cell) .

(EMail) W1TR@... .
(Web)  http://www.Glagowski.org/Radio .

 


Re: cw machine

ja1nlx
 

Matthias

I believe TS590 does not support CW keying via it's serial port.

You should use Key jack in rear panel instead.

73

On 2020/01/05 4:14, Matthias Bellmann wrote:

Hi Bob, YES COM1, YES Shared serial port.

Dont know the internal wiring of my serial cable, will check it. Thanks, you gave me an important hint.

73


Am 04.01.2020 um 19:54 schrieb Bob:
You have configured COM1 to control the radio. You have configured Shared Serial port (COM1) to key the radio. Correct? How are you connecting COM1 DTR the CW keying line (Pin 4 of DB4 or Pin 20 of DB25) to the CW keying line on the radio? Look at Section 6 of the Help file section 'CW Machine'. SeventyThree(s).
On January 4, 2020 at 1:36 PM Matthias Bellmann <Dk4wd@...> wrote:

Desparately i try to use cw machine. I read help chapter "cw machine window" back and forth, up and down, but i did not succeed.

Rig Kenwood ts590
TRX Control via COM1 is working good. E.G. when clicking a spot in cluster window the trx responds with changing freq and mode.
COM1 setup is 9600/8/1/none
polling  interval 100
Icom adress 0
used any combination of DTR/RTS and cts/rts handshaking, making no difference

cw machine software configuration:
COM1
use shared serial port for cw
use ptt switch to transmit
use radio command ptt override

The PT LED in the cw machine window  turns green during transmission and the trx responds to the ptt signal.
The keying LED  shows morse code but the trx does not respond to the cw signal

Did i miss out something? What else can i try?

Thanks for any answer

73 Matthias


 

--
73 de aki
JA1NLX


Re: cw machine

Matthias Bellmann
 

Hi Bob, YES COM1, YES Shared serial port.

Dont know the internal wiring of my serial cable, will check it. Thanks, you gave me an important hint.

73


Am 04.01.2020 um 19:54 schrieb Bob:

You have configured COM1 to control the radio. You have configured Shared Serial port (COM1) to key the radio. Correct? How are you connecting COM1 DTR the CW keying line (Pin 4 of DB4 or Pin 20 of DB25) to the CW keying line on the radio? Look at Section 6 of the Help file section 'CW Machine'. SeventyThree(s).
On January 4, 2020 at 1:36 PM Matthias Bellmann <Dk4wd@...> wrote:

Desparately i try to use cw machine. I read help chapter "cw machine window" back and forth, up and down, but i did not succeed.

Rig Kenwood ts590
TRX Control via COM1 is working good. E.G. when clicking a spot in cluster window the trx responds with changing freq and mode.
COM1 setup is 9600/8/1/none
polling  interval 100
Icom adress 0
used any combination of DTR/RTS and cts/rts handshaking, making no difference

cw machine software configuration:
COM1
use shared serial port for cw
use ptt switch to transmit
use radio command ptt override

The PT LED in the cw machine window  turns green during transmission and the trx responds to the ptt signal.
The keying LED  shows morse code but the trx does not respond to the cw signal

Did i miss out something? What else can i try?

Thanks for any answer

73 Matthias


 


Re: cw machine

Bob
 

You have configured COM1 to control the radio. You have configured Shared Serial port (COM1) to key the radio. Correct? How are you connecting COM1 DTR the CW keying line (Pin 4 of DB4 or Pin 20 of DB25) to the CW keying line on the radio? Look at Section 6 of the Help file section 'CW Machine'. SeventyThree(s).

On January 4, 2020 at 1:36 PM Matthias Bellmann <Dk4wd@...> wrote:

Desparately i try to use cw machine. I read help chapter "cw machine window" back and forth, up and down, but i did not succeed.

Rig Kenwood ts590
TRX Control via COM1 is working good. E.G. when clicking a spot in cluster window the trx responds with changing freq and mode.
COM1 setup is 9600/8/1/none
polling  interval 100
Icom adress 0
used any combination of DTR/RTS and cts/rts handshaking, making no difference

cw machine software configuration:
COM1
use shared serial port for cw
use ptt switch to transmit
use radio command ptt override

The PT LED in the cw machine window  turns green during transmission and the trx responds to the ptt signal.
The keying LED  shows morse code but the trx does not respond to the cw signal

Did i miss out something? What else can i try?

Thanks for any answer

73 Matthias


 


cw machine

Matthias Bellmann
 

Desparately i try to use cw machine. I read help chapter "cw machine window" back and forth, up and down, but i did not succeed.

Rig Kenwood ts590
TRX Control via COM1 is working good. E.G. when clicking a spot in cluster window the trx responds with changing freq and mode.
COM1 setup is 9600/8/1/none
polling  interval 100
Icom adress 0
used any combination of DTR/RTS and cts/rts handshaking, making no difference

cw machine software configuration:
COM1
use shared serial port for cw
use ptt switch to transmit
use radio command ptt override

The PT LED in the cw machine window  turns green during transmission and the trx responds to the ptt signal.
The keying LED  shows morse code but the trx does not respond to the cw signal

Did i miss out something? What else can i try?

Thanks for any answer

73 Matthias


Re: Port 7373

Bob
 

Ping of DXC.VE7CC.NET works just fine. 73.

On January 4, 2020 at 9:08 AM Paul F6EXV <f6exv@hotmail.com> wrote:


Hello all
I do not recall the exact circumstances, but my telnet connection to
VE7CC no longer works. A ping to 7373 indicates a general error.
I have restarted the compter without success.
How can I correct this so I get the cluster back ?
Thanks + 73
Paul F6EXV



Re: Port 7373

David Bonnet
 

Hello,

the VE7CC CCuser turned automatically to AE5E node here and it was configarated for VE7CC.



Le sam. 4 janv. 2020 à 15:24, Paul F6EXV <f6exv@...> a écrit :
Hello Jacek
You know what, that works !
But I wonder why port 7373 is no longer working (it was untill yestyerday).

Jacek, Happy 2020 to you and family
Paul F6EXV

Le 04/01/2020 à 15:18, Jacek Marczewski a écrit :
> HI Paul,
>
> I am using EI7MRE (remote host EI7MRE.ath.cx on port 7300)
>
> 73  and  HNY from Jacek SP5EAQ
>
>
>> Hello all
>> I do not recall the exact circumstances, but my telnet connection to
>> VE7CC no longer works. A ping to 7373 indicates a general error.
>> I have restarted the compter without success.
>> How can I correct this so I get the cluster back ?
>> Thanks + 73
>> Paul F6EXV
>>
>>
>>
>
>
>
> .





Re: Port 7373

Paul F6EXV
 

Hello Jacek
You know what, that works !
But I wonder why port 7373 is no longer working (it was untill yestyerday).

Jacek, Happy 2020 to you and family
Paul F6EXV

Le 04/01/2020 à 15:18, Jacek Marczewski a écrit :
HI Paul,

I am using EI7MRE (remote host EI7MRE.ath.cx on port 7300)

73  and  HNY from Jacek SP5EAQ


Hello all
I do not recall the exact circumstances, but my telnet connection to
VE7CC no longer works. A ping to 7373 indicates a general error.
I have restarted the compter without success.
How can I correct this so I get the cluster back ?
Thanks + 73
Paul F6EXV




.


Re: Port 7373

Jacek Marczewski
 

HI Paul,

I am using EI7MRE (remote host EI7MRE.ath.cx on port 7300)

73  and  HNY from Jacek SP5EAQ

Hello all
I do not recall the exact circumstances, but my telnet connection to
VE7CC no longer works. A ping to 7373 indicates a general error.
I have restarted the compter without success.
How can I correct this so I get the cluster back ?
Thanks + 73
Paul F6EXV

5761 - 5780 of 84187