On January 4, 2020 at 9:34 PM Bob <k4cy@...> wrote:

There's a section UDP Broadcast of DX Spots in the Logger32 Help file. SeventyThree(s).

On January 4, 2020 at 9:18 PM Terry Glagowski / W1TR / AFA1DI <W1TR@...> wrote:

Does anyone have info about UDP broadcasts from Logger32 to other APPs?

Just a topic name or location in the documentation would help.

 

Terry G. Glagowski / W1TR
HAM: W1TR / USAF MARS: AFA1DI / GRID: FN31vw / ELEV: 950 MSL / 41.924750 N, 72.190320 W.

25 Hnath Road, Ashford, CT 06278 .
(860) 429-9444 (Landline) .
(860) 617-1969 (Cell) .

(EMail) W1TR@... .
(Web)  http://www.Glagowski.org/Radio .

 

 

On January 5, 2020 at 5:17 AM Paul F6EXV < f6exv@...> wrote:

Hi all

I am trying to see if it is possible to modify any field of the logging

windows BEFORE the QSO is actually logged ?

For example, how to I add an IOTA reference, how do I modify the time,

how do I add/modify a QSL manager, again, BEFORE the QSO is actually logged.

If I have to log it first, and then edit the QSO to modify field(s), it

will have already be uploaded to ClubLog and/or LoTW. This is what I do

not want to happen.

Thanks for help

73

Paul F6EXV

On January 4, 2020 at 9:18 PM Terry Glagowski / W1TR / AFA1DI <W1TR@...> wrote:

Does anyone have info about UDP broadcasts from Logger32 to other APPs?

Just a topic name or location in the documentation would help.

 

Terry G. Glagowski / W1TR
HAM: W1TR / USAF MARS: AFA1DI / GRID: FN31vw / ELEV: 950 MSL / 41.924750 N, 72.190320 W.

25 Hnath Road, Ashford, CT 06278 .
(860) 429-9444 (Landline) .
(860) 617-1969 (Cell) .

(EMail) W1TR@... .
(Web)  http://www.Glagowski.org/Radio .

 

Hi Bob, YES COM1, YES Shared serial port.

Dont know the internal wiring of my serial cable, will check it. Thanks, you gave me an important hint.

73

Am 04.01.2020 um 19:54 schrieb Bob:

You have configured COM1 to control the radio. You have configured Shared Serial port (COM1) to key the radio. Correct? How are you connecting COM1 DTR the CW keying line (Pin 4 of DB4 or Pin 20 of DB25) to the CW keying line on the radio? Look at Section 6 of the Help file section 'CW Machine'. SeventyThree(s).

On January 4, 2020 at 1:36 PM Matthias Bellmann <Dk4wd@...> wrote:

Desparately i try to use cw machine. I read help chapter "cw machine window" back and forth, up and down, but i did not succeed.

Rig Kenwood ts590
TRX Control via COM1 is working good. E.G. when clicking a spot in cluster window the trx responds with changing freq and mode.
COM1 setup is 9600/8/1/none
polling  interval 100
Icom adress 0
used any combination of DTR/RTS and cts/rts handshaking, making no difference

cw machine software configuration:
COM1
use shared serial port for cw
use ptt switch to transmit
use radio command ptt override

The PT LED in the cw machine window  turns green during transmission and the trx responds to the ptt signal.
The keying LED  shows morse code but the trx does not respond to the cw signal

Did i miss out something? What else can i try?

Thanks for any answer

73 Matthias

 

You have configured COM1 to control the radio. You have configured Shared Serial port (COM1) to key the radio. Correct? How are you connecting COM1 DTR the CW keying line (Pin 4 of DB4 or Pin 20 of DB25) to the CW keying line on the radio? Look at Section 6 of the Help file section 'CW Machine'. SeventyThree(s).

On January 4, 2020 at 1:36 PM Matthias Bellmann <Dk4wd@...> wrote:

Desparately i try to use cw machine. I read help chapter "cw machine window" back and forth, up and down, but i did not succeed.

Rig Kenwood ts590
TRX Control via COM1 is working good. E.G. when clicking a spot in cluster window the trx responds with changing freq and mode.
COM1 setup is 9600/8/1/none
polling  interval 100
Icom adress 0
used any combination of DTR/RTS and cts/rts handshaking, making no difference

cw machine software configuration:
COM1
use shared serial port for cw
use ptt switch to transmit
use radio command ptt override

The PT LED in the cw machine window  turns green during transmission and the trx responds to the ptt signal.
The keying LED  shows morse code but the trx does not respond to the cw signal

Did i miss out something? What else can i try?

Thanks for any answer

73 Matthias

 

On January 4, 2020 at 1:36 PM Matthias Bellmann <Dk4wd@...> wrote:

Desparately i try to use cw machine. I read help chapter "cw machine window" back and forth, up and down, but i did not succeed.

Rig Kenwood ts590
TRX Control via COM1 is working good. E.G. when clicking a spot in cluster window the trx responds with changing freq and mode.
COM1 setup is 9600/8/1/none
polling  interval 100
Icom adress 0
used any combination of DTR/RTS and cts/rts handshaking, making no difference

cw machine software configuration:
COM1
use shared serial port for cw
use ptt switch to transmit
use radio command ptt override

The PT LED in the cw machine window  turns green during transmission and the trx responds to the ptt signal.
The keying LED  shows morse code but the trx does not respond to the cw signal

Did i miss out something? What else can i try?

Thanks for any answer

73 Matthias

On January 4, 2020 at 9:08 AM Paul F6EXV <f6exv@hotmail.com> wrote:


Hello all
I do not recall the exact circumstances, but my telnet connection to
VE7CC no longer works. A ping to 7373 indicates a general error.
I have restarted the compter without success.
How can I correct this so I get the cluster back ?
Thanks + 73
Paul F6EXV

HI Paul,

I am using EI7MRE (remote host EI7MRE.ath.cx on port 7300)

73  and  HNY from Jacek SP5EAQ

Hello all
I do not recall the exact circumstances, but my telnet connection to
VE7CC no longer works. A ping to 7373 indicates a general error.
I have restarted the compter without success.
How can I correct this so I get the cluster back ?
Thanks + 73
Paul F6EXV

.

Hello all
I do not recall the exact circumstances, but my telnet connection to
VE7CC no longer works. A ping to 7373 indicates a general error.
I have restarted the compter without success.
How can I correct this so I get the cluster back ?
Thanks + 73
Paul F6EXV

Hi and happy new year all:

1.- Why sometimes I have to open manually all windows

like they were loosed? In the Currently Open Window box

appear only MDIForm and TCP Server box unchecked.

2.-Why the Summary QsobMode window, only shows a few

years? I have 16.704 and only appear 9367 (Years 1990, 1993-1996.

2003/2005, 2007-2009) I have QSOs from 1978 and the following years, 

but these last years do not appear in the Summary.

Any suggestions will welcome.

Thanks in advance and

73,

Radhames, HI3B

--
HI3B

Who could teach me step by step, how setting/macht L32 for 

try auto logging all QSOs in FT4/FT8 contacts and for sending email messages.

Please, I will glad all ignore my ignorance. Hi hi hi..

73,

Radhames, HI3B

 

--
HI3B

On January 3, 2020 at 12:33 PM Andreas Paulick <andreas.paulick@...> wrote:

Hi,

since some weeks I have a different order of the band colum headings in the DXCC and DXCC Challenge award window.
Band starts at left side with 6m and end right with 160m. Highest band to lowest bands.
Formerly it was opposite. I would like it more, because it is the same like Clublog.

Any chance to change the order? Or can I change it by myself?

73 and HNY!

Paul, DL5CW